| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint | 1300 x 900 x 510 mm | |
|---|---|---|
| Main coffee table dimensions | 900 x 900 x 460 mm | |
| Side table dimensions | 610 x 610 x 510 mm | |
| Main tabletop thickness | 25 mm | |
| Inset rotating tray diameter | 450 mm | |
| Hidden drawer internal depth | 300 mm | |
| Drawer opening height | 80 mm | |
| Side table pedestal base diameter | 280 mm | |
| Main table base wall thickness | 18 mm | |
| Floor clearance under main table | 10 mm | |
| Tabletop edge radius | 20 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Main table distributed static load | 50 kg | |
|---|---|---|
| Side table static load | 20 kg | |
| Drawer rated dynamic load | 10 kg | |
| Set total net weight | 42 kg | |
| Surface scratch resistance | 2000 abrasion cycles | |
| Recommended maximum users around set | 4 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main table base core | E1 grade MDF engineered wood | |
|---|---|---|
| Main table finish | Cream matte polyurethane paint | |
| Side table top and base core | E1 grade MDF engineered wood | |
| Side table finish | Dark charcoal gray matte polyurethane paint | |
| Inset rotating tray surface | Sintered stone laminate overlay | |
| Drawer hardware | Silent 3-section ball bearing slide rails | |
| Drawer recessed pull | Integrated matching painted wood pull | |
| Bottom floor glides | Felt anti-scratch pads | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nested flexible placement | Side table slides partially under main table edge to save space | |
|---|---|---|
| Hidden drawer storage | Full-width under-top drawer opens via recessed front pull for concealed storage | |
| Rotating inset tray | Centered circular tray rotates 360 degrees for easy access to items across the table | |
| Easy-clean surface | Smooth non-porous matte finish wipes clean with dry or damp cloth | |
| Rounded edge safety | All exposed top and base edges are rounded to eliminate sharp corners | |
| Anti-scratch floor protection | Felt base glides prevent scuffs on hardwood, tile and laminate floors | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Small to medium living rooms | Low profile height fits standard sofa seating for lounge use | |
|---|---|---|
| Apartment lounge spaces | Nesting design reduces footprint when not in use for compact layouts | |
| Minimalist wabi-sabi interiors | Two-tone cream and charcoal matte finish matches neutral modern decor schemes | |
| Open concept lounge zones | Movable side table can be repositioned for extra serving space during gatherings | |
| Family household use | Rounded edges and stable solid bases reduce tip risk for children and pets |
EU Market Access Requirements* EN Standards
| Formaldehyde emission | EN 312:2010 | |
|---|---|---|
| Surface resistance | EN 12720:2013 | |
| Structural safety | EN 15372:2016 |
Standards applicable to China-market projects
| Formaldehyde emission limit | GB/T 18580 | |
|---|---|---|
| Surface coating durability | GB/T 4893.4 | |
| Structural stability | GB/T 10357.1 |
This product must meet the following technical requirements: 1. Formaldehyde emission limit: GB/T 18580; 2. Surface coating durability: GB/T 4893.4; 3. Structural stability: GB/T 10357.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
