| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall assembled dimensions | 1200 x 600 x 430 mm | |
|---|---|---|
| Tabletop thickness | 47 mm | |
| Vertical side slat diameter | 10 mm | |
| Slat spacing along long sides | 50 mm | |
| Lower shelf grid wire diameter | 6 mm | |
| Floor clearance under lower shelf | 20 mm | |
| Lower shelf usable height clearance | 313 mm | |
| Lower shelf usable depth | 530 mm | |
| Lower shelf usable length | 1130 mm | |
| Corner foot pad diameter | 20 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop static distributed load capacity | 100 kg | |
|---|---|---|
| Product net weight | 30 kg | |
| Recommended maximum number of users for beverage service | 6 | |
| Powder coat finish scratch resistance | 2H pencil hardness | |
| Stone top surface water absorption rate | 0.02% | |
| Frame weld static connection strength | 500 kg per joint | |
| Structural warranty period | 12 months | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | 1200x600mm dark textured fire-treated stone slab, honed matte finish | |
|---|---|---|
| Perimeter frame and vertical slats | 10mm diameter solid cold-rolled steel bars, matte black powder coating | |
| Lower storage shelf | 6mm diameter steel wire grid, welded to frame, matte black powder coating | |
| Corner support feet | Injection-molded non-slip PP plastic pads, glued to frame base | |
| Top edge trim | 1.2mm thick black steel angle welded to slats to support tabletop | |
| Frame weld points | Fully MIG-welded joints at all slat and grid intersections, ground smooth | |
| Surface finish on metal parts | 70um thick epoxy polyester powder coat, indoor corrosion resistant | |
| Fasteners for tabletop attachment | M6 stainless steel countersunk screws, 16 pieces securing stone to frame | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Fixed height design | 430mm work surface optimized for standard sofa seat heights of 450 mm | |
|---|---|---|
| Open lower grid shelf storage | Provides ventilated open storage for books, magazines and remote controls | |
| Non-slip leveling feet | Prevents floor scratching and stabilizes table on low-pile rugs and hard flooring | |
| Stain-resistant tabletop | Non-porous stone surface supports easy cleaning of beverage spills and tea service residue | |
| Fully welded frame structure | Eliminates loose hardware rattle and provides rigid lateral stability | |
| Open perimeter slat design | Allows 360-degree visibility through frame, maintains light visual profile in small spaces | |
| Edge protection design | Rounded steel top frame prevents sharp edge contact injuries during use | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Shipping carton dimensions | 1350 x 750 x 200 mm | |
|---|---|---|
| Gross shipping weight | 33 kg | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living rooms | Centered on area rug in front of 3-seat sofa and armchairs for tea and beverage service | |
|---|---|---|
| Office reception and lounge areas | Positioned between visitor seating for guest beverage service and reading material storage | |
| Studio apartment open plan spaces | Open slat frame maintains visual lightness while providing two-tier storage in small footprints | |
| Industrial modern interior schemes | Matte black metal and dark stone finish complements concrete, dark wood and leather upholstery | |
| Casual meeting breakout spaces | Provides low-height work surface for informal collaboration and refreshment placement | |
| Recommended complementary pieces | Matching slat-frame side table, matte grey leather seating, low-pile textured area rug |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables, applicable to structural performance | |
|---|---|---|
| EN 1022:2018 | Furniture – Seating and tables – Determination of stability, applicable to tip resistance testing | |
| EN 13722:2004 | Furniture – Test methods for surface finishes, applicable to scratch and stain resistance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to stone-top furniture structural safety | |
|---|---|---|
| GB/T 5296.6-2004 | Consumer product instructions for furniture, applicable to product labeling and user guidance | |
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture, applicable to finish emissions |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to stone-top furniture structural safety; 2. GB/T 5296.6-2004: Consumer product instructions for furniture, applicable to product labeling and user guidance; 3. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture, applicable to finish emissions; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
