| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Large table overall size | 800 mm diameter x 500 mm height | |
|---|---|---|
| Small table overall size | 600 mm diameter x 400 mm height | |
| Tabletop thickness | 12 mm | |
| Metal slat width | 20 mm | |
| Metal slat spacing | 30 mm | |
| Large table base ring diameter | 760 mm | |
| Small table base ring diameter | 560 mm | |
| Lower shelf diameter (small table) | 450 mm | |
| Under-large-table clearance height | 470 mm | |
| Floor clearance under base ring | 10 mm | |
| Large table C-frame opening width | 600 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set gross weight | 48 kg | |
|---|---|---|
| Large tabletop distributed static load | 30 kg | |
| Small tabletop distributed static load | 20 kg | |
| Small table lower shelf static load | 10 kg | |
| Frame static load capacity | 100 kg | |
| Sintered stone surface stain resistance | Level 5 | |
| Powder coat finish abrasion resistance | 2000 cycles | |
| Recommended maximum users | 4 people | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large tabletop | 12mm thick white marble-pattern sintered stone, polished sealed surface | |
|---|---|---|
| Small tabletop | 12mm thick white marble-pattern sintered stone, polished sealed surface | |
| Structural frame | 1.2mm thick carbon steel with matte black powder coating | |
| Vertical slat supports | Solid 20mm wide carbon steel bars welded to base rings | |
| Lower storage shelf (small table) | Black painted MDF board with smooth matte finish | |
| Base connection hardware | Zinc-plated steel bolts and locking nuts for knockdown assembly | |
| Floor protection pads | 5mm thick non-slip EVA rubber pads pre-fitted to base rings | |
| Frame weld joints | Fully ground and powder-coated smooth welds at slat-to-ring connections | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nesting space-saving function | Small table slides fully under the large table C-frame opening to reduce footprint | |
|---|---|---|
| Independent use function | Both tables can be separated and used as standalone coffee or side tables | |
| Lower shelf storage (small table) | Open circular shelf provides accessible storage for books, magazines or small decor | |
| Surface cleaning function | Non-porous sintered stone top allows wipe-clean with damp cloth, no sealing required | |
| Floor protection function | EVA pads on base prevent scuffs on hard flooring and reduce movement noise | |
| Knockdown assembly function | Frame and tabletops ship flat for transport, assemble with included hex key in 30 minutes | |
| Stability design | Wide circular base ring distributes weight evenly to prevent tipping on level floors | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room | Place in front of 4seater sofas for serving drinks, snacks and decor items | |
|---|---|---|
| Small apartment space | Nesting design reduces footprint when not in use, ideal for compact urban homes | |
| Apartment balcony lounge | Use as side/coffee surface for balcony seating areas for casual relaxation | |
| Office reception lounge | Deploy in guest waiting areas for a contemporary, polished look with flexible arrangement | |
| Studio open-plan space | Separate tables to create multiple surface zones for working, dining and entertaining |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety for domestic tables, performance guideline | |
|---|---|---|
| EN 10346:2015 | Continuously hot-dip coated steel flat products, applicable to frame material |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to MDF shelf components | |
|---|---|---|
| GB/T 1732-2020 | Paint film impact resistance test, applicable to metal frame powder coating | |
| GB 6566-2010 | Radionuclide limit for building materials, applicable to sintered stone tabletops | |
| GB/T 10357.1-2013 | Furniture mechanical performance test for tables, applicable to static load testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to MDF shelf components; 2. GB/T 1732-2020: Paint film impact resistance test, applicable to metal frame powder coating; 3. GB 6566-2010: Radionuclide limit for building materials, applicable to sintered stone tabletops; 4. GB/T 10357.1-2013: Furniture mechanical performance test for tables, applicable to static load testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
