| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (large table) | 1200 x 1200 x 350 mm | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total product net weight | 58 kg | |
|---|---|---|
| Per-tabletop static load capacity | 80 kg | |
| Nested configuration footprint saving | 45% | |
| Surface scratch resistance rating | 3000 cycles | |
| Frame static load rating | 150 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large tabletop substrate | 18mm MDF core with matte black thermofoil laminate | |
|---|---|---|
| Small tabletop substrate | 18mm MDF core with matte taupe thermofoil laminate | |
| Support frame | 20mm diameter cold-rolled steel tube with matte black powder coating | |
| Frame weld points | Ground and smooth finished with matching powder coat | |
| Bottom foot pads | 8mm thick non-slip PE plastic pads | |
| Tabletop edge finish | Continuous rolled thermofoil with no visible seam | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Nesting sliding mechanism | Free-sliding open-frame design, no fixed tracks | |
|---|---|---|
| Configuration flexibility | Supports fully nested, partially extended, or fully separated placement | |
| Surface function | Smooth non-porous laminated surface for drink, decor, and book placement | |
| Floor protection | Fixed non-marring foot pads on all frame contact points | |
| Cleaning access | Open base design allows full floor cleaning under tables without moving units | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Total shipping gross weight | 68 kg | |
|---|---|---|
| Total shipping volume | 0.28 CBM | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room placement | Positioned in front of sofas or sectionals for beverage and decor display | |
|---|---|---|
| Open-plan lounge use | Suitable for modern minimalist reception areas or casual office break spaces | |
| Small apartment space optimization | Nested configuration reduces footprint when extra surface area is not needed | |
| Multi-surface entertaining use | Separated tables provide spread-out serving space for snacks and drinks during gatherings |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
