| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1200 x 600 x 450 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Leg upper section diameter | 30 mm | |
| Leg foot cap height | 50 mm | |
| Corner radius | 30 mm | |
| Leg spacing along length | 1100 mm | |
| Leg spacing along width | 500 mm | |
| Under-table floor clearance | 425 mm | |
| Edge overhang from leg center | 50 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static tabletop load | 100 kg | |
|---|---|---|
| Net weight | 30 kg | |
| Surface heat resistance | 120 °C | |
| Surface abrasion resistance | 2000 cycles | |
| Leg frame static load capacity | 150 kg | |
| Recommended maximum placemat weight per unit area | 50 kg/m² | |
| Service life for residential use | 5 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop core | 18mm high-density MDF substrate | |
|---|---|---|
| Tabletop surface | White marble-pattern melamine veneer with subtle grey veining | |
| Tabletop edge banding | 2mm thick PVC edge trim matching top color | |
| Leg main body | 25mm diameter black powder-coated carbon steel tube | |
| Leg foot caps | Polished brass-finish zinc alloy decorative caps | |
| Foot contact pads | 5mm thick non-slip silicone floor protectors | |
| Mounting hardware | M8 zinc-plated steel leg attachment screws | |
| Surface coating on legs | 60μm thick matte black powder coat | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Assembly requirement | Four screws to attach legs to pre-drilled tabletop mounting points | |
|---|---|---|
| Floor protection | Non-slip silicone pads under each brass foot cap to prevent floor scratching | |
| Surface cleaning | Wipe-clean smooth surface resistant to common household liquid spills | |
| Load distribution | Even four-point leg support eliminates top warping under distributed weight | |
| Safety feature | Rounded 30mm corners reduce impact injury risk for passing users | |
| Placement flexibility | Freestanding design suitable for positioning centered in front of standard three-seater sofas | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room | Positioned in front of three-seater upholstered sofas for holding drinks, decor and reading materials | |
|---|---|---|
| Small apartment lounge | Slim profile fits compact seating areas without occupying excessive floor space | |
| Modern office reception area | Pairs with upholstered reception seating for guest waiting areas in professional spaces | |
| Apartment rental furnishing | Durable easy-clean surface suitable for mid-term furnished rental properties | |
| Recommended pairing | Matches with light blue, grey or neutral-tone upholstered sofas for contemporary interior schemes |
EU Market Access Requirements* EN Standards
| Domestic furniture safety requirement | EN 12521:2015 | |
|---|---|---|
| Surface scratch resistance | EN 15186:2012 |
Standards applicable to China-market projects
| Tabletop formaldehyde emission | GB/T 17657E1 grade | |
|---|---|---|
| Metal leg coating adhesion | GB/T 9286Grade 1 | |
| Furniture mechanical stability | GB/T 10357.1 | |
| Furniture surface wear resistance | GB/T 4893.8 |
This product must meet the following technical requirements: 1. Tabletop formaldehyde emission: GB/T 17657E1 grade; 2. Metal leg coating adhesion: GB/T 9286Grade 1; 3. Furniture mechanical stability: GB/T 10357.1; 4. Furniture surface wear resistance: GB/T 4893.8; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
