| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1400 x 750 x 450 mm | |
|---|---|---|
| Tabletop thickness | 15 mm | |
| Corner radius | 30 mm | |
| Outer leg cross-section | 40 x 20 mm | |
| Inner leg cross-section | 20 x 10 mm | |
| Under-table clearance | 415 mm | |
| Leg splay angle from vertical | 12 degrees | |
| Tabletop overhang front/back | 30 mm | |
| Tabletop overhang sides | 50 mm | |
| Floor contact pad diameter | 20 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight | 40 kg | |
|---|---|---|
| Total static distributed load | 68 kg | |
| Surface scratch resistance | 3000 cycles | |
| Surface water resistance | IPX4 | |
| Recommended placemat weight capacity | 25 kg | |
| Leg frame static load per leg | 25 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | 15mm white veined sintered stone, polished smooth finish | |
|---|---|---|
| Outer legs (front left, back right) | Powder-coated matte black carbon steel, welded construction | |
| Inner legs (front right, back left) | Brushed gunmetal electroplated stainless steel, welded construction | |
| Frame connection plates | 2mm thick galvanized steel, screwed to tabletop underside | |
| Leg floor pads | Non-slip TPE rubber, adhered to leg bases | |
| Tabletop edge finish | Bullnose polished edge, rounded smooth profile | |
| Metal leg coating thickness | 60 micron powder coat/electroplated finish | |
| Stone substrate moisture content | 0.5% | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Surface use | Flat open top for holding drinks, decor, and reading materials | |
|---|---|---|
| Floor protection | Rubber foot pads prevent floor scratching and sliding | |
| Stability design | Outward-splayed four-leg base prevents tipping under uneven load | |
| Surface maintenance | Non-porous sealed top allows wipe-clean with damp cloth | |
| Assembly requirement | Knock-down assembly with included hex key and hardware | |
| Placement orientation | Designed for centered placement facing a standard 3-seat sofa | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room | Positioned centered in front of a 3 m wide sofa for beverage and decor placement | |
|---|---|---|
| Small apartment lounge | Compact open-base design avoids visual clutter in limited floor space | |
| Modern office reception area | Suitable for guest seating areas to hold magazines and refreshments | |
| Recommended pairing | Paired with fabric or leather low-profile sofas 450 mm seat height | |
| Indoor use only | Not rated for outdoor exposure to moisture or extreme temperatures |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic tables | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for surface resistance to cold liquids |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to top substrate | |
|---|---|---|
| GB/T 24821-2009 | Performance requirements for metal furniture frames, applicable to leg structure | |
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to top substrate; 2. GB/T 24821-2009: Performance requirements for metal furniture frames, applicable to leg structure; 3. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
