| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1300 x 700 x 400 mm | |
|---|---|---|
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 50 kg | |
|---|---|---|
| Product net weight | 42 kg | |
| Drawer open/close cycle rating | 10000 cycles | |
| Door hinge cycle rating | 20000 cycles | |
| Tabletop surface abrasion resistance | 2000 cycles | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | 18mm E1 grade particleboard with natural oak wood grain laminate | |
|---|---|---|
| Door and drawer fronts | 18mm E1 grade MDF with matte off-white polyurethane paint finish | |
| Cabinet carcass | 15mm E1 grade particleboard with matching off-white melamine finish | |
| Top and bottom edge trim | Solid wood veneer wrapped MDF with oak finish | |
| Drawer slides | Cold-rolled steel full-extension soft-close slides, 45mm width | |
| Cabinet door hinges | Cold-rolled steel soft-close concealed hinges, 35mm cup diameter | |
| Base glide pads | 4mm thick non-slip polyethylene pads at corners | |
| Edge banding | 1mm thick PVC edge banding on all exposed panel edges | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Left hinged cabinet door | Opens 95 degrees outward with soft-close damping, revealing single full-height storage compartment | |
|---|---|---|
| Two stacked right drawers | Pull out fully with soft-close return, providing divided enclosed storage for small living room items | |
| Recessed handleless design | Drawer and door gaps serve as pull points, eliminating protruding hardware for a smooth exterior | |
| Low-profile recessed plinth | Creates floating visual effect, allows easy floor cleaning around the table base | |
| Rounded safety corners | All exposed top corners have rounded edges to reduce impact injury risk | |
| Flat stable worktop | Provides level surface for placing drinks, decorative items, books and serving trays | |
| Floor protection glides | Adjustable low-profile pads at base prevent scuffing on hard flooring | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Gross shipping weight | 48 kg | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Contemporary living rooms | Suits Nordic or minimalist interiors, placed in front of sofas for shared surface use | |
|---|---|---|
| Small apartment spaces | Compact footprint with enclosed storage reduces clutter in limited floor areas | |
| Open plan lounge areas | Neutral finish coordinates with light wood and neutral soft furnishing palettes | |
| Residential media use case | Low height supports placement of media accessories and decorative items under wall-mounted TVs | |
| Family daily use | Smooth matte finish is easy to wipe clean, resistant to common household spills |
EU Market Access Requirements* EN Standards
| Domestic furniture safety requirement | EN 12521:2015 | |
|---|---|---|
| Formaldehyde emission for wood panels | EN 312:2010 E1 class ≤0.124mg/m3 | |
| Surface wear resistance for furniture | EN 15186:2012 |
Standards applicable to China-market projects
| Panel furniture formaldehyde emission | GB/T 39600E1 limit ≤0.124mg/m3 | |
|---|---|---|
| Furniture surface cold/heat resistance | GB/T 4893.3Class 2 | |
| Drawer and door durability | GB/T 10357.5Level 2 |
This product must meet the following technical requirements: 1. Panel furniture formaldehyde emission: GB/T 39600E1 limit ≤0.124mg/m3; 2. Furniture surface cold/heat resistance: GB/T 4893.3Class 2; 3. Drawer and door durability: GB/T 10357.5Level 2; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
