| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 800 x 800 x 460 mm | |
|---|---|---|
| tabletop thickness | 18 mm | |
| frame tube section | 25 x 25 mm | |
| vertical slat width | 20 mm | |
| vertical slat spacing | 40 mm | |
| bottom frame clearance from floor | 10 mm | |
| diagonal cross-brace section | 20 x 20 mm | |
| tabletop edge overhang | 20 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| net weight | 40 kg | |
|---|---|---|
| distributed tabletop static load | 100 kg | |
| surface scratch resistance rating | 3H | |
| powder coating corrosion resistance | 72 hours salt spray | |
| vertical slat side panel impact resistance | 10 J | |
| structure service life reference | 5 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| tabletop substrate | High-density fiberboard core with white marble-veined sintered stone/laminate surface | |
|---|---|---|
| tabletop edge banding | Matching white PVC edge banding with square profile | |
| main frame tubing | 1.2mm thick cold-rolled steel tubing | |
| frame surface finish | Matte black electrostatic powder coating | |
| vertical slat panels | 1.0mm thick flat black steel slats | |
| diagonal corner brace | 1.5mm thick steel cross-brace welded to frame corners | |
| frame weld points | Ground smooth weld joints at all tube intersections | |
| floor contact pads | Non-slip polyethylene plastic pads on frame bottom | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| structural stability | Diagonal corner cross-brace prevents frame racking under uneven load | |
|---|---|---|
| surface utility | Waterproof, easy-clean tabletop suitable for hot beverage placement up to 120°C | |
| base design | Open slatted two-side cage base provides visual lightness without enclosed storage | |
| floor protection | Integrated plastic foot pads prevent scratching of hard flooring and carpet indentation | |
| assembly requirement | Flat-pack design requires bolted assembly of frame components and tabletop attachment | |
| weight distribution | Four-point perimeter frame support evenly distributes load across the tabletop surface | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| residential living room | Centrally placed in front of sofas for beverage, decor and reading material placement | |
|---|---|---|
| small office reception area | Positioned between guest seating for reception areas holding magazines and refreshments | |
| apartment lounge spaces | Compact square footprint fits small urban living rooms without occupying excess floor space | |
| showroom display | Used as display plinth for home decor exhibitions matching minimalist interior design schemes | |
| co-working break areas | Placed in casual breakout zones for employee rest and informal small-group interaction |
EU Market Access Requirements* EN Standards
| furniture stability testing | EN 12521:2015 strength, durability and stability for domestic tables | |
|---|---|---|
| surface resistance to cold liquids | EN 12720:2009+A1:2013 for furniture surface finish performance |
Standards applicable to China-market projects
| tabletop formaldehyde emission | GB/T 17657E1 grade ≤0.124mg/m³ | |
|---|---|---|
| metal furniture structural strength | GB/T 3324 general technical requirements for wooden furniture with metal frames | |
| powder coating adhesion | GB/T 9286cross-cut test grade 1 |
This product must meet the following technical requirements: 1. tabletop formaldehyde emission: GB/T 17657E1 grade ≤0.124mg/m³; 2. metal furniture structural strength: GB/T 3324 general technical requirements for wooden furniture with metal frames; 3. powder coating adhesion: GB/T 9286cross-cut test grade 1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
