| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 1400 x 820 x 480 mm | |
|---|---|---|
| tabletop thickness | 25 mm | |
| corner radius | 120 mm | |
| central support column diameter | 60 mm | |
| 4-star base spread diameter | 800 mm | |
| base leg section width | 40 mm | |
| floor clearance under tabletop | 430 mm | |
| base leg wall thickness | 1.5 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| net weight | 25 kg | |
|---|---|---|
| distributed tabletop static load | 50 kg | |
| base static load rating | 75 kg | |
| surface impact resistance | 1.2 J | |
| finish abrasion resistance | 2000 cycles | |
| seating capacity alignment | 3 people | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| tabletop substrate | E1 grade engineered wood board | |
|---|---|---|
| tabletop surface finish | White matte PU paint finish | |
| central support column | Chrome-plated cold-rolled steel | |
| 4-star base legs | Polished chrome-plated steel | |
| base foot pads | Non-slip PE plastic pads | |
| tabletop-base connector | Powder-coated steel mounting bracket | |
| paint film thickness | 80 um | |
| board moisture content | 10% | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| floor protection | Integrated plastic foot pads prevent scratches on hard flooring | |
|---|---|---|
| surface maintenance | Smooth non-porous finish allows wipe-cleaning with damp cloth | |
| load distribution | 4-star base spreads weight evenly to eliminate table wobble on flat floors | |
| edge safety | Rounded tabletop corners eliminate sharp impact points for household and lounge use | |
| assembly method | Knock-down construction requires attaching base to tabletop with included hardware | |
| placement stability | Wide cross base prevents tipping under normal residential lounge load conditions | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| residential living room | Placed in front of 3seat sofas for holding drinks, books and decor | |
|---|---|---|
| office lounge area | Used in reception lounge zones for visitor seating side refreshment placement | |
| small apartment spaces | Compact rounded-corner design fits tight seating areas without sharp edges | |
| boutique waiting areas | Complements soft upholstered seating in salon or clinic waiting spaces | |
| recommended surface care | Wipe spills immediately with soft damp cloth, avoid abrasive cleaners to preserve finish |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture for domestic use, tables: safety strength and durability requirements | |
|---|---|---|
| EN 13722:2004 | Furniture, assessment of surface resistance to cold liquids for tabletops | |
| EN 1022:2018 | Domestic furniture seating and tables stability test method |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to tabletop substrate and finish | |
|---|---|---|
| GB/T 1732-2020 | Paint film impact resistance test method, applicable to tabletop surface validation | |
| GB 18584-2001 | Indoor decorating materials limit of harmful substances for wooden furniture | |
| GB/T 10357.1-2013 | Furniture mechanical performance test for tables, applicable to static load validation |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletop substrate and finish; 2. GB/T 1732-2020: Paint film impact resistance test method, applicable to tabletop surface validation; 3. GB 18584-2001: Indoor decorating materials limit of harmful substances for wooden furniture; 4. GB/T 10357.1-2013: Furniture mechanical performance test for tables, applicable to static load validation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
