| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (large table extended) | 1200 x 800 x 450 mm | |
|---|---|---|
| Large table tabletop diameter | 800 mm | |
| Large table total height | 450 mm | |
| Small table tabletop diameter | 600 mm | |
| Small table total height | 400 mm | |
| Metal vertical leg tube diameter | 25 mm | |
| Metal base ring tube diameter | 30 mm | |
| Tabletop thickness | 12 mm | |
| Nesting clearance between tables | 55 mm | |
| Large table leg span (base ring diameter) | 700 mm | |
| Small table leg span (base ring diameter) | 520 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Large table static load capacity | 50 kg | |
|---|---|---|
| Total set net weight | 22 kg | |
| Tabletop surface scratch resistance | 3000 cycles | |
| Frame static load stability (tilt resistance) | 15 kg lateral force at table edge | |
| Recommended service life | 5 years | |
| Number of seating positions supported | 4 | |
| Frame joint weld strength | 1000 kgf static pull force | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large table tabletop | Black stone-effect sintered stone laminate, matte finish with linear geometric groove detailing | |
|---|---|---|
| Small table tabletop | White marble-effect sintered stone laminate, smooth matte finish with faint grey veining | |
| Frame and legs | Cold-rolled steel tube, matte black electrostatic powder coating | |
| Table edge trim | Matching black/white PVC edge banding, flush fit to tabletop | |
| Base connection welds | Fully ground and powder-coated welded joints between vertical legs and circular base ring | |
| Floor contact points | Embedded non-slip PE plastic foot pads at base ring contact points | |
| Tabletop understructure | 15mm thick MDF support panel bonded under decorative top layer | |
| Frame-to-top hardware | M6 x 20mm carbon steel zinc-plated bolts with lock washers, 4 bolts per table | |
| Wood-based panel moisture content | 10% | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Nested storage configuration | Small table slides fully underneath large table to reduce footprint to 800mm diameter for compact storage | |
|---|---|---|
| Surface maintenance function | Non-porous matte tabletop surface wipes clean with dry or damp cloth, resistant to common household water and beverage spills | |
| Floor protection function | Soft PE foot pads prevent scuffs and scratches on hard flooring and low-pile carpet, with no metal parts in direct contact with the floor | |
| Weight transfer stability function | Circular lower base ring distributes weight evenly across 4 floor contact points, preventing wobble on slightly uneven residential floors | |
| Edge safety function | Rounded 2mm radius edges on all tabletop perimeters eliminate sharp corners to reduce impact injury risk for household use | |
| Surface heat resistance | Tabletop withstands 120°C hot item contact without discoloration or delamination for 10 minute exposure | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 1 carton | |
|---|---|---|
| Shipping carton dimensions | 860 x 860 x 120 mm | |
| Gross shipping weight | 25 kg | |
| Shipping volume per set | 0.089 CBM | |
| Assembly time | 20 minutes | |
| 20ft GP container loading quantity | 330 sets | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons |
Recommended spaces / users / usage modes
| Residential living room placement | Positioned in front of 3seat fabric or leather sofas, for serving drinks, displaying decor and holding reading materials during casual seating | |
|---|---|---|
| Small apartment / studio use | Fully nested configuration saves floor space in compact living areas, pulled out to add serving surface when hosting guests | |
| Office reception lounge use | Placed in informal visitor waiting areas to hold beverages, brochures and corporate decor, with durable easy-clean surfaces suitable for high-traffic common areas | |
| Balcony casual lounge use | Placed in enclosed balcony seating areas alongside outdoor lounge chairs for tea or coffee service, with moisture-resistant metal frame and wipe-clean surfaces | |
| Recommended complementary pairing | Pairs with low-pile area rugs and minimalist black/neutral tone seating to match contemporary, industrial or Scandinavian interior styles | |
| Enclosed balcony casual lounge use | Placed in enclosed balcony seating areas alongside outdoor lounge chairs for tea or coffee service, with moisture-resistant powder-coated metal frame that resists up to 70% relative humidity | |
| Rental property furnishing | Supplied as standard furnishing for short-term and long-term rental apartments, with neutral black/white color scheme matching 90% of mainstream interior decor styles, KD construction simplifies replacement of damaged parts |
EU Market Access Requirements* EN Standards
| EN 12521:2015 Furniture - Strength, durability and safety - Requirements for domestic tables | Applicable for structural load, stability and durability testing for residential placement | |
|---|---|---|
| EN 13722:2004 Furniture - Test methods for surfaces - Assessment of surface resistance to abrasion | Applicable for tabletop wear performance validation, recommended minimum 3000 cycles for domestic use | |
| EN 71-3:2019 Safety of toys - Migration of certain elements | Applicable for surface coating heavy metal content if product is used in households with young children |
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applicable for tabletop panel dimensional tolerance, edge finishing quality and structural stability inspection | |
|---|---|---|
| GB/T 4893.4-2013 Test for surface resistance to dry heat | Applicable for tabletop surface performance acceptance, minimum Class 2 rating recommended for residential use | |
| GB/T 4893.8-2013 Test for surface wear resistance | Applicable for tabletop durability acceptance, recommended minimum 3000 abrasion cycles for residential coffee tables | |
| GB 28007-2011 Safety requirements for children's furniture (general use guidance) | Recommends rounded edge radius of minimum 2mm to reduce impact injury, appropriate for household placement | |
| GB 18580-2017 Indoor decorating and refurbishing materials - Limit of formaldehyde emission from wood-based panels | Applicable for MDF understructure formaldehyde emission limit, E1 grade required for indoor residential use |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applicable for tabletop panel dimensional tolerance, edge finishing quality and structural stability inspection; 2. GB/T 4893.4-2013 Test for surface resistance to dry heat: Applicable for tabletop surface performance acceptance, minimum Class 2 rating recommended for residential use; 3. GB/T 4893.8-2013 Test for surface wear resistance: Applicable for tabletop durability acceptance, recommended minimum 3000 abrasion cycles for residential coffee tables; 4. GB 28007-2011 Safety requirements for children's furniture (general use guidance): Recommends rounded edge radius of minimum 2mm to reduce impact injury, appropriate for household placement; 5. GB 18580-2017 Indoor decorating and refurbishing materials - Limit of formaldehyde emission from wood-based panels: Applicable for MDF understructure formaldehyde emission limit, E1 grade required for indoor residential use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
