| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (extended) | 1100 x 900 x 400 mm | |
|---|---|---|
| Main table overall diameter | 900 mm | |
| Main table total height | 400 mm | |
| Main table body wall thickness | 80 mm | |
| Recessed tray depth (main top) | 15 mm | |
| Side table glass top dimensions | 500 x 350 mm | |
| Side table total height | 430 mm | |
| Side table support base diameter | 280 mm | |
| Floor clearance under main table base | 10 mm | |
| Nesting overlap depth when stowed | 200 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Main table static distributed load capacity | 100 kg | |
|---|---|---|
| Set total net weight | 45 kg | |
| Recommended number of users | 4 | |
| Finish abrasion resistance (cycles) | 2000 | |
| Glass top impact resistance rating | ANSI Z97.1 compliant | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main table core material | Fiberglass-reinforced composite | |
|---|---|---|
| Main table surface finish | Matte cream UV-cured paint | |
| Side table top material | 10mm thick light-tint tempered glass | |
| Side table support body | Matte cream fiberglass composite | |
| Base anti-scratch pads | 3mm thick felt glides | |
| Recessed tray surfaces | Same matte painted finish as main top | |
| Edge treatment | Fully rounded soft edge profile (R20 minimum) | |
| Internal structural reinforcement | MDF core bracing | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nesting space-saving design | Side table tucks 200mm under glass overhang to reduce footprint | |
|---|---|---|
| Integrated recessed trays | Three non-removable top indentations for stable display of small objects | |
| Dual surface height design | Side table sits 30mm higher than main table for tiered item placement | |
| Floor protection feature | Felt glides on all base contact points prevent hard floor scratching | |
| Water-resistant surface performance | Matte painted finish resists daily beverage spills for easy cleaning | |
| Free-standing stability design | Low center of gravity on rounded base prevents tipping under normal use | |
| No-tool assembly requirement | Two components ship pre-assembled, only placement required post-unboxing | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary residential use case | Center placement in living rooms in front of 4seater sofas for beverage and decor display | |
|---|---|---|
| Recommended interior design styles | Wabi-sabi, Japandi, minimalist, modern cream-style interiors matching soft rounded forms | |
| Small space suitability | Apartments and compact living areas due to nesting space-saving design | |
| Commercial space application | Lounge areas, boutique waiting rooms, and minimalist hotel guest suites | |
| Surface use suitability | Safe for placement on hardwood, tile, and low-pile carpeted floors with included felt pads | |
| Recommended complementary furniture | Low-profile curved sofas, light wood media cabinets, and textured neutral area rugs |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Domestic furniture strength, durability and safety requirements for tables | |
|---|---|---|
| EN 12150-1:2015 | Thermally toughened soda lime silicate safety glass for furniture use | |
| EN 13722:2004 | Assessment of surface resistance to cold liquids for furniture finishes |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for finish and structural stability checks | |
|---|---|---|
| GB/T 4893.4-2013 | Surface wear resistance test method for furniture, applicable for painted surface durability | |
| GB 15763.2-2005 | Safety requirements for tempered glass used in furniture, applicable for side table top |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for finish and structural stability checks; 2. GB/T 4893.4-2013: Surface wear resistance test method for furniture, applicable for painted surface durability; 3. GB 15763.2-2005: Safety requirements for tempered glass used in furniture, applicable for side table top; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
