| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall assembled dimensions | 1200 x 600 x 450 mm | |
|---|---|---|
| Tabletop thickness | 16 mm | |
| Leg cross-section dimension at mounting point | 20 mm | |
| Corner radius | 50 mm | |
| Front leg clearance span | 1100 mm | |
| Side leg clearance span | 500 mm | |
| Under-table ground clearance | 434 mm | |
| Leg taper diameter at floor contact | 15 mm | |
| Mounting plate diameter at leg-top joint | 30 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static tabletop load capacity | 45 kg | |
|---|---|---|
| Product net weight | 12 kg | |
| Surface vertical impact resistance | 10 J | |
| Surface abrasion resistance | 2000 cycles | |
| Powder coating rust resistance (indoor use) | 100 hours salt spray | |
| Leveling adjustment range | 5 mm | |
| Recommended maximum user weight for edge sitting | 80 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 16 mm thick MDF board | |
|---|---|---|
| Tabletop surface finish | White marble-pattern melamine laminate | |
| Tabletop edge treatment | Matching laminate sealed edge with rounded profile | |
| Leg construction | Powder-coated matte black carbon steel tubing | |
| Leg mounting hardware | Zinc-plated steel screw fasteners with black plastic end caps | |
| Foot glides | Black nylon non-slip leveling glides | |
| Surface coating layer thickness | 0.1 mm melamine wear layer | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Structure type | Fixed four-corner leg open frame design | |
|---|---|---|
| Assembly requirement | Flat-pack leg attachment to pre-finished tabletop | |
| Surface function | Smooth non-porous easy-clean top for drinks, decor and reading material | |
| Safety feature | Rounded anti-collision table corners | |
| Floor protection | Non-marking nylon glides prevent scratches on carpet and hard flooring | |
| Leveling function | Adjustable foot glides compensate for slight uneven floor surfaces | |
| Disassembly for transport | Legs are fully detachable from tabletop for flat storage and moving | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Single carton outer dimensions | 1250 x 680 x 180 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room placement | Position in front of sofas for holding drinks, remotes, books and decorative items | |
|---|---|---|
| Small apartment and studio use | Compact open-frame design maintains visual lightness in limited floor space | |
| Office reception lounge application | Use in waiting areas for guest refreshments and reading materials | |
| Modern minimalist interior compatibility | Coordinates with monochrome, Scandinavian and contemporary decor schemes | |
| Low-traffic casual space use | Suitable for bedrooms, walk-in closets or home lounge nooks | |
| Recommended cleaning method | Wipe surface with damp soft cloth and mild detergent, avoid abrasive scouring pads |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety for domestic tables, applicable to structural performance | |
|---|---|---|
| EN 15187:2007 | Furniture assessment of surface resistance to cold liquids, applicable to top finish testing | |
| EN 1022:2019 | Domestic furniture seating stability reference for occasional table edge load validation |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to tabletop substrate performance | |
|---|---|---|
| GB/T 4893.8-2013 | Surface wear resistance test method for furniture surfaces, applicable to laminate top verification | |
| GB/T 4893.1-2021 | Surface resistance to cold liquids test method, applicable to water/stain resistance checks | |
| GB 6675.2-2014 | Toy safety mechanical requirements reference for rounded corner edge safety validation |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletop substrate performance; 2. GB/T 4893.8-2013: Surface wear resistance test method for furniture surfaces, applicable to laminate top verification; 3. GB/T 4893.1-2021: Surface resistance to cold liquids test method, applicable to water/stain resistance checks; 4. GB 6675.2-2014: Toy safety mechanical requirements reference for rounded corner edge safety validation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
