| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (fully extended) | 1200 x 800 mm | |
|---|---|---|
| Large table top diameter | 800 mm | |
| Large table overall height | 500 mm | |
| Small table top diameter | 700 mm | |
| Small table overall height | 400 mm | |
| Table top thickness | 12 mm | |
| Drawer internal usable dimensions | 345 x 310 x 94 mm | |
| Metal base ring diameter (large table) | 760 mm | |
| Metal base ring diameter (small table) | 660 mm | |
| Metal frame tube wall thickness | 1.5 mm | |
| Floor clearance under table apron | 100 mm | |
| Table edge radius | 10 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set net weight | 35 kg | |
|---|---|---|
| Large table top static distributed load capacity | 50 kg | |
| Table top surface temperature resistance | 120 °C | |
| Surface abrasion resistance | 3000 cycles | |
| Frame structure static load safety factor | 3:1 | |
| Recommended maximum user weight for edge sitting | 100 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large table top | 12mm white faux marble sintered stone with polished finish, gray veining | |
|---|---|---|
| Small table top | 12mm matching white faux marble sintered stone with polished finish, rounded edges | |
| Small table storage body | 18mm MDF substrate with black wood-grain laminate finish, sealed edges | |
| Large table support frame | 1.5mm thick carbon steel tube with matte black powder coating, C-shaped half-ring base | |
| Small table support frame | 1.5mm thick carbon steel tube with matte black powder coating, circular ring base | |
| Drawer slide hardware | Cold-rolled steel 3-section full extension slides, black finish | |
| Drawer front panel | 18mm MDF with matching black wood-grain laminate, flush fit to body | |
| Foot pads | Non-slip TPE adjustable floor pads, 4 per table base | |
| Fastener hardware | Zinc-plated steel hex bolts and cam lock connectors | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Sliding nesting mechanism | Small table slides fully or partially under large table to reduce footprint by 40% when not in use | |
|---|---|---|
| Integrated small table storage | Single hidden full-circle drawer provides enclosed storage for remotes, coasters and small living room items | |
| Smooth drawer operation | 3-section slides allow 90% drawer extension with soft detent close, no loud slamming | |
| Leveling adjustment | 4 adjustable TPE feet per table compensate for 10mm uneven floor gaps without rocking | |
| Dual-height serving surface | Two height levels allow separate display of decor, snacks and drinks without cluttering a single surface | |
| Scratch-resistant table top | Non-porous polished surface wipes clean with dry cloth, resists daily scuffs from mugs and decor | |
| Knock-down assembly | Frame and tops ship flat, assemble with included hex key in 50 minutes without specialized tools | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Largest carton dimensions | 850 x 850 x 120 mm | |
|---|---|---|
| Second carton dimensions | 720 x 720 x 200 mm | |
| Total shipping gross weight | 35 kg | |
| Total shipping volume | 0.16 CBM | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Small apartment living room | Nesting design saves floor space in compact living areas in front of 3seat sofas | |
|---|---|---|
| Modern minimalist / light luxury interior schemes | Black and white colorway matches monochrome, marble and metal decor palettes | |
| Open plan lounge areas | Two surface heights support casual entertaining, snack service and decor display | |
| Home media rooms | Low profile does not block TV sight lines when placed in front of media consoles | |
| Rental property furnishing | Durable scratch-resistant surfaces and easy assembly suit long-term residential rental use | |
| Lounge waiting areas | Stable construction supports light use in small office reception or lounge zones |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture for domestic use, strength, durability and safety requirements for tables | |
|---|---|---|
| EN 15372:2008 | Surface resistance to cold liquids, heat and abrasion for residential furniture tops | |
| EN 1022:2018 | Stability testing for domestic seating and tables, applicable to tip-over prevention |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to MDF body and laminate finish | |
|---|---|---|
| GB/T 4897.3-2003 | Particleboard/MDF requirements for furniture structural use, applicable to cabinet substrate | |
| GB/T 17657-2013 | Test methods for surface physical and chemical properties of wood-based panels, applicable to finish durability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to MDF body and laminate finish; 2. GB/T 4897.3-2003: Particleboard/MDF requirements for furniture structural use, applicable to cabinet substrate; 3. GB/T 17657-2013: Test methods for surface physical and chemical properties of wood-based panels, applicable to finish durability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
