| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall assembled dimensions | 1100 x 550 x 450 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Support wall thickness | 1.5 mm | |
| Corner radius of tabletop | 50 mm | |
| Under-table clear height | 380 mm | |
| Support footprint width (single end) | 180 mm | |
| Tabletop overhang beyond supports | 20 mm | |
| Open underpass clear span between supports | 740 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop distributed static load capacity | 45 kg | |
|---|---|---|
| Product net weight | 15.4 kg | |
| Frame rust resistance service life | 3 years | |
| Surface scratch resistance (abrasion cycles) | 2000 cycles | |
| Recommended maximum supported item weight per 100x100mm area | 10 kg | |
| Anti-tip stability load at table edge | 15 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 18mm MDF engineered wood panel | |
|---|---|---|
| Tabletop surface finish | White marble-vein melamine laminate, scratch and water resistant | |
| Frame and support construction | Integrated bent steel tubing forming continuous edge trim and end legs | |
| Frame surface treatment | Matte black electrostatic powder coating, rust resistant | |
| Foot contact pads | 4mm non-slip rubber pads bonded to base bottom | |
| Edge trim integration | Frame wraps fully around tabletop perimeter with no sharp exposed edges | |
| Surface coating thickness | 60 micron | |
| Board moisture content | 10% | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Fixed height design | No height adjustment, static 450mm working height optimized for sofa-side use | |
|---|---|---|
| Open unobstructed under-storage | Full open central underpass with no crossbars or shelves for flexible basket/ottoman storage | |
| Rounded corner safety design | All tabletop corners have 50mm radius to reduce impact injury risk | |
| Surface spill resistance | Laminate surface allows wipe-clean maintenance with damp cloth, no liquid penetration | |
| Floor protection | Integrated rubber foot pads prevent scratching hard flooring and reduce sliding noise | |
| Fixed assembly structure | No moving parts, hinges, lifts, or extendable mechanisms for long-term stability | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room use | Placed in front of sofas for holding drinks, books, decor and remote controls | |
|---|---|---|
| Small apartment space | Compact open-base design fits tight spaces without visual heaviness | |
| Office reception lounge use | Suits modern reception waiting areas for guest beverage and reading material placement | |
| Recommended matching furniture | Pairs with 3-seater sofas 2200 mm wide, lounge chairs, and area rugs | |
| Indoor use only | Designed for dry indoor environments, not suitable for outdoor patio use | |
| Commercial lounge placement | Works in hotel lobbies, co-working break rooms, and cafe lounge zones |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Safety, strength and durability requirements for domestic tables | |
|---|---|---|
| EN 14749:2016 | Safety requirements for domestic storage and work surfaces, applicable to tabletop stability |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to tabletop substrate performance | |
|---|---|---|
| GB/T 17657-2013 | Test methods for surface wear resistance and water resistance of wood-based panels | |
| GB 18584-2001 | Limit of formaldehyde emission for indoor wooden furniture, required E1 grade compliance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletop substrate performance; 2. GB/T 17657-2013: Test methods for surface wear resistance and water resistance of wood-based panels; 3. GB 18584-2001: Limit of formaldehyde emission for indoor wooden furniture, required E1 grade compliance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
