| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall main table dimensions | 900 x 900 x 450 mm | |
|---|---|---|
| Main table top thickness | 12 mm | |
| Main table drawer front height | 200 mm | |
| Main table plinth base diameter | 700 mm | |
| Side table top diameter | 550 mm | |
| Side table total height | 500 mm | |
| Side table metal frame wall thickness | 1.5 mm | |
| Side table flat base length | 450 mm | |
| Drawer internal usable depth | 300 mm | |
| Clearance under side table base | 20 mm | |
| Main table rotating plinth height | 50 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Main table distributed static load capacity | 100 kg | |
|---|---|---|
| Main table total net weight | 70 kg | |
| Sintered stone top heat resistance | 1200 °C | |
| Tempered glass impact resistance | 1 kg steel ball drop from 1m | |
| Metal finish corrosion resistance | 500 hours neutral salt spray | |
| Rotating mechanism cycle life | 10000 rotations | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main table top | 12mm dark gray sintered stone with natural marble veining, polished sealed edge | |
|---|---|---|
| Main table drum body | Brushed dark gunmetal carbon steel, 1.5mm wall thickness, anti-fingerprint coating | |
| Main table rotating plinth | Powder-coated solid steel ring with sealed ball bearing swivel | |
| Storage drawer | Cold-rolled steel drawer box with soft-close concealed slides, matching gunmetal front panel | |
| Side table top | 8mm smoked black tempered glass with polished rounded edge | |
| Side table frame | Single bent 1.5mm dark powder-coated carbon steel cantilever support | |
| Side table weighted base | Flat solid steel plate with non-slip felt bottom pads | |
| Hardware components | Zinc alloy concealed drawer handles, stainless steel fastening screws, rubber floor protection pads | |
| Surface finish | Brushed metal with anti-scratch clear top coat, sintered stone with stain-resistant nano-sealant | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| 360-degree rotating main table top | Smooth ball-bearing rotation allows access to storage drawer from any seating position | |
|---|---|---|
| Soft-close integrated storage drawer | Push-to-open front drawer with 300mm internal depth for remote controls and living room items | |
| Slide-under cantilever side table design | Low-profile flat base slides fully under sofas or main table for flexible placement | |
| Stain and heat resistant table tops | Sintered stone and tempered glass surfaces support hot drink placement and easy wipe cleaning | |
| Floor protection design | Felt and rubber pads on all base contact points prevent scratching hard flooring | |
| Pre-assembled construction | Main table and side table ship fully assembled except for optional handle installation | |
| Stable weighted side table support | Solid steel base plate prevents tipping when items are placed on the overhanging top | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Modern living room seating areas | Placed in front of 3-seater sofas for beverage, decor and reading material storage | |
|---|---|---|
| Small apartment open plan spaces | Compact round design and nestable side table reduce footprint in limited spaces | |
| Contemporary lounge and reception areas | Dark metal and stone finish suits upscale office waiting areas and boutique lounges | |
| Flexible side placement | C-shaped side table can be positioned next to accent chairs or chaise longues for individual use | |
| Low-height display use | Smooth polished tops support decorative objects, books and table lamps without visual clutter |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables, applicable for structural load testing | |
|---|---|---|
| EN 14073-2:2004 | Office and domestic storage furniture safety requirements, applicable for drawer structural integrity | |
| EN 12150-1:2015 | Thermally toughened soda lime silicate safety glass for furniture, applicable for side table top |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for hardware and structural safety inspection | |
|---|---|---|
| GB/T 4897.3-2015 | Particleboard for furniture use, applicable if internal drawer supports use wood-based panels | |
| GB 15763.2-2017 | Safety glazing materials in building, Part 2: Tempered glass, applicable for side table top | |
| GB/T 17657-2013 | Test methods for evaluating surface resistance to scratches, stains and heat for furniture surfaces |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for hardware and structural safety inspection; 2. GB/T 4897.3-2015: Particleboard for furniture use, applicable if internal drawer supports use wood-based panels; 3. GB 15763.2-2017: Safety glazing materials in building, Part 2: Tempered glass, applicable for side table top; 4. GB/T 17657-2013: Test methods for evaluating surface resistance to scratches, stains and heat for furniture surfaces; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
