| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall large table dimensions | 1300 x 700 x 400 mm | |
|---|---|---|
| Overall small table dimensions | 650 x 650 x 550 mm | |
| Large tabletop thickness | 9 mm | |
| Small tabletop thickness | 9 mm | |
| Metal leg tube diameter | 25 mm | |
| Large table cross-brace height | 120 mm | |
| Nesting overlap depth | 400 mm | |
| Leg floor contact spread (large table) | 1100 mm | |
| Leg floor contact spread (small table) | 550 mm | |
| Tabletop edge radius | 30 mm | |
| Floor clearance under large table | 330 mm | |
| Floor clearance under small table | 480 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Large table distributed static load | 100 kg | |
|---|---|---|
| Small table distributed static load | 50 kg | |
| Tabletop surface abrasion resistance | 4000 cycles | |
| Metal frame rust resistance | Grade 2 | |
| Foot pad leveling adjustment | 10 mm | |
| Total set net weight | 25 kg | |
| Recommended maximum place setting items | 8 items | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large tabletop | 9mm sintered stone-effect panel with grey veined glossy finish | |
|---|---|---|
| Small tabletop | 9mm sintered stone-effect panel with matching grey veined glossy finish | |
| Leg framework | 25mm diameter matte black powder-coated carbon steel tubing | |
| Large table cross-brace | 25mm diameter matching black powder-coated steel tubing | |
| Welded joints | Fully ground and painted steel welds at leg-to-top and brace connections | |
| Foot pads | Non-marking PE plastic adjustable leveling pads | |
| Tabletop edge finish | Polished rounded edge with no sharp corners | |
| Hardware connectors | Zinc-plated steel M6 assembly screws | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nesting storage function | Smaller taller table tucks partially under larger lower table to reduce floor space by 40% | |
|---|---|---|
| Leveling adjustment | Rotating foot pads at each leg base adjust up to 10mm to stabilize tables on uneven carpet or hard floors | |
| Surface use function | Smooth non-porous tabletop resists water and common household spills, suitable for holding drinks, books, and decorative objects | |
| Impact protection | Rounded polished table edges eliminate sharp corners to prevent collision injury during use | |
| Independent use function | Each table can be used separately as a standalone coffee table or side table when not nested | |
| Floor protection function | Soft plastic foot pads prevent scratches on hard flooring and indentation on low-pile carpet | |
| Assembly function | Knock-down assembly with included hex key and hardware requires no specialized tools | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary use space | Modern residential living rooms positioned in front of 3seat sofas | |
|---|---|---|
| Small space application | Studio apartments and compact living areas where nesting saves floor space when not in use | |
| Secondary use case | Transitional side tables pulled beside armchairs or sofas for serving drinks or displaying decor | |
| Matching decor style | Minimalist, industrial, contemporary, and Italian light luxury interior schemes | |
| Recommended placement surface | Low-pile carpet, polished concrete, tile, or hardwood flooring | |
| Target user group | Urban homeowners, rental residents, and apartment dwellers seeking flexible space-saving lounge furniture | |
| Recommended complementary pieces | Low-profile leather sofas, textured fabric sectionals, and neutral-toned area rugs |
EU Market Access Requirements* EN Standards
| Furniture mechanical stability | EN 12521:2015 | |
|---|---|---|
| Surface chemical resistance | EN 12720:2009+A1:2013 |
Standards applicable to China-market projects
| Tabletop mechanical performance | GB/T 17657 | |
|---|---|---|
| Metal frame coating performance | GB/T 13667.1 | |
| Furniture safety general requirements | GB 28007 |
This product must meet the following technical requirements: 1. Tabletop mechanical performance: GB/T 17657; 2. Metal frame coating performance: GB/T 13667.1; 3. Furniture safety general requirements: GB 28007; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
