| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 800 x 800 x 450 mm | |
|---|---|---|
| tabletop thickness | 15 mm | |
| edge trim thickness | 3 mm | |
| pedestal base width | 400 mm | |
| pedestal base depth | 400 mm | |
| pedestal base height | 420 mm | |
| X-brace member width | 40 mm | |
| floor clearance height | 10 mm | |
| X-brace diagonal span | 565 mm | |
| tabletop overhang per side | 200 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| net weight | 50 kg | |
|---|---|---|
| distributed tabletop static load | 100 kg | |
| top surface impact resistance | 6 J | |
| high-gloss finish abrasion resistance | 2000 cycles | |
| floor glide static load per foot | 12.5 kg | |
| recommended placemat heat resistance | 120 °C | |
| base structure lateral stability load | 30 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| tabletop core | Sintered stone, white with subtle grey marble veining | |
|---|---|---|
| tabletop edge band | Black PVC edge trim, 3mm thick | |
| pedestal core | MDF engineered wood panel, 18mm thick | |
| pedestal surface finish | High-gloss black baked polyurethane lacquer | |
| X-brace support | Powder-coated flat steel bar, 40x8mm cross-section | |
| floor glides | Non-marking nylon rubber pads, 2mm thick | |
| structural joinery | M6 steel cam-lock connectors and wood dowels | |
| underside support frame | 18mm MDF bracing frame, attached to pedestal top | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| height adjustment | Fixed 450 mm height, no lift or tilt mechanism | |
|---|---|---|
| floor protection | Non-slip nylon glides under four base corners | |
| surface maintenance | Stain-resistant non-porous top, wipe-clean with damp cloth | |
| structural reinforcement | Integrated X-brace prevents pedestal racking | |
| assembly requirement | Knock-down assembly connecting top to pre-built pedestal base | |
| weight distribution | Central pedestal transfers load evenly to floor contact points | |
| surface usage | Flat level top supports drinks, books, decor and serving trays | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| living room center placement | Positioned in front of 3-seater sofas for beverage and decor placement | |
|---|---|---|
| modern apartment interior | Fits minimalist, light luxury and contemporary interior design schemes | |
| small office reception area | Suitable for low seating reception lounge waiting areas | |
| residential lounge seating group | Placed between two armchairs and a sofa in open-plan living spaces | |
| show home display | Used in property show home staging for contemporary living room setups |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Domestic furniture strength, durability and safety for tables | |
|---|---|---|
| EN 13722:2004 | Furniture surface test methods for resistance to cold liquids |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to base structure | |
|---|---|---|
| GB/T 4897.3-2015 | Particleboard/MDF requirements for furniture use, applicable to base substrate | |
| GB 18584-2001 | Indoor decoration material furniture formaldehyde emission limit |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to base structure; 2. GB/T 4897.3-2015: Particleboard/MDF requirements for furniture use, applicable to base substrate; 3. GB 18584-2001: Indoor decoration material furniture formaldehyde emission limit; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
