Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	900 × 900 × 450 mm
Overall set footprint (large table as primary)	900 x 900 x 450 mm
Large table diameter	900 mm
Large table total height	450 mm
Large table tabletop thickness	12 mm
Large table fluted base diameter	750 mm
Large table base height	438 mm
Small table diameter	700 mm
Small table total height	500 mm
Small table chrome support pole diameter	50 mm
Small table fluted base diameter	380 mm
Nesting clearance under large table	420 mm
Tabletop edge radius	10 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Large table distributed static load capacity	100 kg
Large table base wall thickness	1.2 mm
Tabletop surface heat resistance	120 °C
Tabletop surface abrasion resistance	2000 cycles
Anti-slip floor pad thickness	5 mm
Total set net weight reference	40 kg
Structural warranty period	3 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Large table tabletop	Glossy black veined engineered marble-look stone, polished finish
Small table tabletop	Matching glossy black veined engineered stone, polished rounded edge
Large table base	Gunmetal electroplated carbon steel with vertical fluted texture
Small table support pole	Polished chrome-plated carbon steel single central pedestal
Small table base	Matching gunmetal electroplated fluted circular metal disc
Base finish coating	Baked anti-rust powder/electroplated coating
Tabletop underside support	15 mm thick MDF backing board
Floor contact pads	Non-slip non-marring EVA rubber pads
Assembly hardware	Zinc-plated steel connection bolts
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Nesting storage function	Small table tucks fully under large table edge to save floor space
Independent use function	Both tables can be used separately as primary coffee table and side table
Tabletop stain resistance	Glossy non-porous surface wipes clean with damp cloth for daily maintenance
Floor protection function	EVA pads under bases prevent scratching hard flooring and dampen movement noise
Edge safety design	Polished rounded tabletop edges eliminate sharp corners to prevent impact injury
Anti-tip stability	Weighted fluted metal bases lower center of gravity to prevent tipping under normal use
Surface placement function	Supports placement of drinks, books, decorative objects and light display items
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Primary placement location	Modern living rooms in front of 3seater sofas for beverage and decor placement
Secondary placement option	Lounge areas, boutique reception spaces, or open-plan apartment seating zones
Suitable interior design styles	Modern minimalist, Italian luxury, industrial contemporary, glam design schemes
Space saving benefit for users	Ideal for small to medium sized living areas where flexible surface space is needed
Recommended complementary furniture	Matching fluted metal media console, boucle or leather sofas, metallic accent decor
Surface use limitation	For indoor dry residential use only, not suitable for outdoor or wet commercial environments

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Furniture - Strength, durability and safety for domestic tables, applicable for load and stability requirements
EN 13722:2004	Furniture - Test methods for surface finishes, applicable for abrasion and heat resistance testing

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for tabletop backing and structural performance
GB/T 4897.3-2015	Particleboard for furniture use, applicable for tabletop substrate material quality
GB 18584-2001	Indoor decoration material limit of harmful substances for wooden furniture, applicable for formaldehyde emission limits

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for tabletop backing and structural performance;
2. GB/T 4897.3-2015: Particleboard for furniture use, applicable for tabletop substrate material quality;
3. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture, applicable for formaldehyde emission limits;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · NCT-GMB700-2PC

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · NCT-GMB700-2PC

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · NCT-GMB700-2PCOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The NCT-GMB700PC unbranded 2-Piece Round Nesting Coffee Table Set brings refined modern luxury to residential and light commercial seating spaces, balancing sculptural visual appeal with flexible functional design. Visually, the set features two perfectly circular tabletops finished in glossy black veined engineered stone with a polished surface; the large table rests on a wide, vertically fluted gunmetal electroplated carbon steel base, while the smaller table pairs a matching veined stone top with a polished chrome central support pole and compact fluted gunmetal disc base, creating a coordinated, texturally dynamic silhouette that aligns with modern minimalist, Italian luxury, industrial contemporary, and glam interior schemes. Each tabletop is fitted with a 15mm thick MDF backing board for structural support, attached to metal frames finished with baked anti-rust powder and electroplated coatings, secured with zinc-plated steel connection bolts. The large table measures 900mm in diameter and 450mm tall with a 12mm thick top, while the smaller table reaches 700mm in diameter and 500mm in height. The large table supports 100kg of distributed static load, with tabletops rated for 120°C heat resistance and 2000 cycles of abrasion resistance; polished rounded edges eliminate sharp corners to reduce impact injury risk, and weighted fluted bases lower the center of gravity to deliver anti-tip stability under normal use. 5mm thick non-slip, non-marring EVA rubber pads on base undersides prevent hard floor scratches and reduce movement noise, while the non-porous glossy tabletop surface wipes clean easily with a damp cloth for simple daily maintenance. The smaller table tucks fully beneath the edge of the larger table to minimize unused floor space when not in active use, or both pieces can be deployed independently as a primary coffee table and side table, offering flexible surface space for drinks, books, decorative objects, and light display items. The set is ideally positioned in front of three-seater sofas in small to medium modern living rooms, and works equally well in lounge areas, boutique reception spaces, and open-plan apartment seating zones; it pairs seamlessly with matching fluted metal media consoles, boucle or leather sofas, and metallic accent decor. Procurement teams and buyers should note the set is designed exclusively for indoor dry residential use, and is not suitable for outdoor or wet commercial environments. Each set ships across two cartons, with a reference assembly time of 40 minutes, total packaged gross weight of 90kg, and packaging volume of 0.55m³. The structure is covered by a 3-year warranty.

2-Piece Round Nesting Coffee Table Set with Fluted Gunmetal Base and Black Veined Glossy Top Specifications

Suppliers and stock