2-Piece Round Nested Coffee Table Set, Brushed Gold Drum Base with Black Veined Top Side Table (model NCT-RND-GLD-BLK-001) is listed under Coffee Table. Dimensions: 800 × 800 × 450 mm. Materials: 1.2mm thick brushed gold stainless steel with radial sunburst finish. Load capacity: 45 kg. Product Features: modern,luxury,style,metal,construction,round,profile,nesting,design. This page consolidates 6 groups of specifications and GB / EN standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | JUESHANGDA | Model | NCT-RND-GLD-BLK-001 |
| Overall dimensions (W × D × H) | 800 × 800 × 450 mm | Set overall footprint (nested configuration) | 800 x 800 x 450 mm |
| Large table diameter | 800 mm | Large table overall height | 450 mm |
| Large table drum base wall thickness | 15 mm | Large table top thickness | 12 mm |
| Small table diameter | 600 mm | Small table overall height | 400 mm |
| Small table tapered base bottom diameter | 250 mm | Small table top thickness | 12 mm |
| Small table metal edge trim width | 10 mm | Large table bottom protective trim thickness | 5 mm |
| Nesting clearance between tables when tucked | 20 mm | Finished Top Thickness | 45 mm |
| Effective Knee Clearance | 0 | Leg / Support Section | 80 mm main section with 2 mm metal wall |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm | Large table distributed static load capacity | 45 kg |
| Set total net weight | 42 kg | Top surface abrasion resistance (metal finish) | 2000 cycles |
| Floor contact static load per base | 1.2 kg/cm² | Surface finish corrosion resistance | 48 hours |
| Recommended maximum number of seated users | 4 | Top Static Load Reference | 150 kg uniformly distributed |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | Hinge Opening Life | Acceptance target 80000 cycles |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | Large table top | 1.2mm thick brushed gold stainless steel with radial sunburst finish |
| Large table drum body | 0 | Large table bottom trim | 5mm thick black anti-slip rubber ring |
| Small table top | 12mm thick black veined sintered stone with polished finish | Small table top edge trim | 1mm thick polished stainless steel protective perimeter band |
| Small table pedestal base | 1.2mm thick dark gunmetal finished tapered conical steel base | Base internal support structure | 18mm thick MDF internal reinforcement for metal shells |
| Floor contact pads | 3mm thick non-marking felt pads under both bases | Surface coating (metal parts) | Electrophoretic primer plus satin polyurethane topcoat |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | Edge Band Thickness | 2 mm |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | Nesting placement function | Small table tucks partially under large table edge to save floor space |
| Surface cleaning compatibility | Non-porous tops wipe clean with soft damp cloth, no sealing required | Floor protection function | 0 |
| Stability design | Wider lower base distribution prevents tipping under normal residential use | Dual-surface function | Two distinct top heights allow flexible placement of drinks, decor or reading materials |
| Assembly requirement | Fully assembled delivery, no on-site hardware fastening required | Leveling adjustment | 0 |
| Cable Management Capacity | 0 | Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
| Reference Package Count | 1 set / 2 cartons | Reference Assembly Time | 40 minutes per set |
| Reference Package Dimensions | 2100× 1100× 300 mm | Reference Packaged Gross Weight | 90 kg/set in 2 cartons |
| Reference Packaging Volume | 0.55 m³/set | Primary use space | Living room seating areas in front of 3-seat or L-shaped sofas |
| Secondary use space | Open-plan lounge areas, boutique hotel lobbies or high-end apartment reception zones | Target user segment | Residential consumers and commercial interior designers seeking modern luxury accent furniture |
| Recommended layout configuration | Position large table centered in front of sofa, small table offset to side for flexible surface space | Surface use suitability | Holds drinkware, table lamps, decorative objects, books and light serving trays |
| Floor type compatibility | Suitable for hard tile, stone, hardwood and short-pile carpeted floors | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
| 2026-09-12 09:19 | Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | 0 | here is not [done] |
| 2026-09-12 09:19 | Leveling adjustment | Fixed rigid bases with no adjustable glides, intended for flat level floors | 0 | here is not [done] |
| 2026-09-12 09:19 | Floor protection function | Hidden felt pads prevent scratch damage to hard wood, tile or stone floors | 0 | here is not [done] |
| 2026-09-12 09:19 | Large table drum body | 1.5mm thick gold-finished carbon steel cylindrical shell | 0 | here is not [done] |
| 2026-09-12 09:19 | Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | 0 | here is not [done] |
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 800 × 800 × 450 mm | |
|---|---|---|
| Set overall footprint (nested configuration) | 800 x 800 x 450 mm | |
| Large table diameter | 800 mm | |
| Large table overall height | 450 mm | |
| Large table drum base wall thickness | 15 mm | |
| Large table top thickness | 12 mm | |
| Small table diameter | 600 mm | |
| Small table overall height | 400 mm | |
| Small table tapered base bottom diameter | 250 mm | |
| Small table top thickness | 12 mm | |
| Small table metal edge trim width | 10 mm | |
| Large table bottom protective trim thickness | 5 mm | |
| Nesting clearance between tables when tucked | 20 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 0 | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Large table distributed static load capacity | 45 kg | |
|---|---|---|
| Set total net weight | 42 kg | |
| Top surface abrasion resistance (metal finish) | 2000 cycles | |
| Floor contact static load per base | 1.2 kg/cm² | |
| Surface finish corrosion resistance | 48 hours | |
| Recommended maximum number of seated users | 4 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Large table top | 1.2mm thick brushed gold stainless steel with radial sunburst finish | |
|---|---|---|
| Large table drum body | 0 | |
| Large table bottom trim | 5mm thick black anti-slip rubber ring | |
| Small table top | 12mm thick black veined sintered stone with polished finish | |
| Small table top edge trim | 1mm thick polished stainless steel protective perimeter band | |
| Small table pedestal base | 1.2mm thick dark gunmetal finished tapered conical steel base | |
| Base internal support structure | 18mm thick MDF internal reinforcement for metal shells | |
| Floor contact pads | 3mm thick non-marking felt pads under both bases | |
| Surface coating (metal parts) | Electrophoretic primer plus satin polyurethane topcoat | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Nesting placement function | Small table tucks partially under large table edge to save floor space | |
|---|---|---|
| Surface cleaning compatibility | Non-porous tops wipe clean with soft damp cloth, no sealing required | |
| Floor protection function | 0 | |
| Stability design | Wider lower base distribution prevents tipping under normal residential use | |
| Dual-surface function | Two distinct top heights allow flexible placement of drinks, decor or reading materials | |
| Assembly requirement | Fully assembled delivery, no on-site hardware fastening required | |
| Leveling adjustment | 0 | |
| Cable Management Capacity | 0 | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Primary use space | Living room seating areas in front of 3-seat or L-shaped sofas | |
|---|---|---|
| Secondary use space | Open-plan lounge areas, boutique hotel lobbies or high-end apartment reception zones | |
| Target user segment | Residential consumers and commercial interior designers seeking modern luxury accent furniture | |
| Recommended layout configuration | Position large table centered in front of sofa, small table offset to side for flexible surface space | |
| Surface use suitability | Holds drinkware, table lamps, decorative objects, books and light serving trays | |
| Floor type compatibility | Suitable for hard tile, stone, hardwood and short-pile carpeted floors |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for residential tables | |
|---|---|---|
| EN 15187:2007 | Furniture - Assessment of surface resistance to cold liquids for table tops | |
| EN 1022:2018 | Furniture - Seating and tables - Determination of stability |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal MDF supports | |
|---|---|---|
| GB/T 4893.8-2013 | Furniture surface wear resistance test method, applicable to metal and stone tops | |
| GB/T 4893.9-2013 | Furniture surface impact resistance test method, applicable to all horizontal surfaces | |
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture | |
| GB/T 17657-2013 | Test methods for evaluating physical and chemical properties of wood-based panels |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal MDF supports; 2. GB/T 4893.8-2013: Furniture surface wear resistance test method, applicable to metal and stone tops; 3. GB/T 4893.9-2013: Furniture surface impact resistance test method, applicable to all horizontal surfaces; 4. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture; 5. GB/T 17657-2013: Test methods for evaluating physical and chemical properties of wood-based panels; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp