Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1700 × 800 × 460 mm
Overall assembled dimensions	1700 x 800 x 460 mm
Tabletop thickness	18 mm
Left U-shaped metal leg section width	50 mm
Left metal leg wall thickness	1.5 mm
Horizontal metal cross-stretcher width	30 mm
Right marble plinth base length	700 mm
Right plinth base depth	800 mm
Right plinth base height	420 mm
Floor clearance under left table section	442 mm
Tabletop corner radius	30 mm
Metal edge trim thickness on plinth	2 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Product net weight	78 kg
Distributed static tabletop load capacity	80 kg
Point load at table center	30 kg
Recommended maximum number of users	6
Surface water resistance rating	IPX4
Metal frame anti-corrosion durability	1000 hours
Stone surface abrasion resistance	6000 revolutions
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop panel	Polished book-matched Pandora-style natural stone slab with grey/white veining
Left support frame	Stainless steel with brushed gold PVD finish, formed into cantilever U-shape
Horizontal cross-stretcher	Brushed gold PVD stainless steel tube, connected between left U-leg vertical sections
Right plinth core	High-density MDF structural core, clad in matching veined stone panels
Plinth edge trim	Brushed gold PVD stainless steel trim wrapping all stone plinth panel edges
Underside support structure	Powder-coated steel support rails bonded to stone tabletop underside
Floor contact pads	Non-slip scratch-resistant rubber pads fitted to all base bottom edges
Tabletop edge finish	Hand-polished smooth rounded edge with zero sharp corners
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Structural load distribution	Asymmetric dual-base design transfers load evenly between left cantilever leg and right plinth
Surface cleaning function	Non-porous polished stone surface allows wipe-clean maintenance for spills and dust
Floor protection function	Hidden rubber contact pads prevent hard metal/stone contact scratching soft flooring
Assembly requirement	Semi-knocked-down assembly requiring attachment of left leg and plinth to tabletop with included hardware
Placement function	Low-profile height optimized for placement in front of sofas and lounge seating
Decorative display function	Flat, level stone top supports display of decor, trays, books and beverage service items
Stability feature	Wide right plinth base eliminates tipping risk when weight is applied to table edges
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential living room	Centered in front of sofas or sectionals for beverage service and decorative display, sized for 6seat layouts
Luxury lounge spaces	Used in high-end hotel lobbies, VIP lounges or club reception areas for premium aesthetic alignment
Modern open-plan apartments	Fits minimalist/light luxury interior schemes with gold metal and natural stone material palettes
Show home staging	Selected by interior designers for luxury property display to elevate perceived interior quality
Low-height side seating areas	Placed next to lounge chairs in reading corners as a large accent surface for accessories
Designer office reception areas	Used in high-end executive waiting zones to convey premium brand perception

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Furniture strength, durability and safety for domestic tables, applicable for structural testing
EN 15186:2006	Furniture surface resistance to cold liquids, applicable for stone tabletop stain resistance
EN 1022:2018	Furniture seating/table stability test method, applicable to asymmetric base stability verification

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for plinth core structural performance
GB/T 4897.3-2015	Particleboard/MDF requirements for furniture structural use, applicable to plinth internal core
GB 6566-2010	Radionuclide limits for natural stone building materials, applicable to marble/stone panels
GB/T 1732-1993	Paint film impact resistance test, applicable to metal finish durability verification

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for plinth core structural performance;
2. GB/T 4897.3-2015: Particleboard/MDF requirements for furniture structural use, applicable to plinth internal core;
3. GB 6566-2010: Radionuclide limits for natural stone building materials, applicable to marble/stone panels;
4. GB/T 1732-1993: Paint film impact resistance test, applicable to metal finish durability verification;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CT-ASYM-GLD-STN-1700

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CT-ASYM-GLD-STN-1700

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CT-ASYM-GLD-STN-1700Open Export Tool

Quick Actions

Post an RFQ

Product Description

This modern luxury rectangular coffee table features a Pandora-style veined stone top paired with a brushed gold asymmetric base, defined by a balanced dual-support layout that pairs a left cantilevered U-shaped metal support with a substantial right-side stone-clad plinth. The design creates a deliberate visual contrast between the slim, elevated metal frame section and the solid, grounded plinth, forming a dynamic silhouette that anchors seating areas without visual heaviness. The polished stone top displays book-matched grey and white veining, finished with hand-polished smooth rounded edges free of sharp corners for a refined, touch-friendly profile. The table is constructed with a polished natural veined stone top, brushed gold-finished stainless steel frame, and matching stone-clad asymmetric plinth built on a high-density MDF structural core. Brushed gold PVD stainless steel trim wraps all edges of the stone plinth, while powder-coated steel support rails bond to the underside of the stone top for reinforced structural integrity. Non-slip, scratch-resistant rubber pads line all base bottom edges to prevent floor damage, and a horizontal brushed gold stainless steel cross-stretcher connects the vertical sections of the left U-leg for added rigidity. Practically, the table’s asymmetric dual-base design distributes weight evenly between the left cantilever leg and wide right plinth, eliminating tipping risk when weight is applied to table edges. The non-porous polished stone surface supports simple wipe-clean maintenance for spills and dust, with a static distributed load capacity suited for holding decor, trays, books, and beverage service items. Its low-profile height is optimized for placement directly in front of sofas and lounge seating, with a scale suited for up to six users. The piece fits seamlessly in a range of spaces: it works as a central living room anchor in front of sectionals or sofas in residential settings and modern open-plan apartments aligned with minimalist or light luxury palettes, fits high-end commercial spaces including hotel lobbies, VIP lounges, club reception areas, and designer executive waiting zones, and is a frequent selection for show home staging to elevate perceived interior quality. It also functions as a large accent surface beside lounge chairs in residential reading corners. For procurement, note the item ships semi-knocked down across two cartons, requiring assembly of the left leg and plinth to the tabletop with included hardware. The packaged set carries a substantial gross weight, so delivery and in-transit handling plans should account for two-package receipt, and on-site assembly time should be allocated per set for installation.

Modern Luxury Rectangular Pandora-Style Veined Stone Coffee Table with Brushed Gold Asymmetric Base Specifications

Suppliers and stock