Product supplierSquare White Low Coffee Table with Polished Chrome Wire Sled Base, 18mm MDF core with white matte laminate finish
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 800 × 800 × 400 mm | |
|---|---|---|
| tabletop thickness | 38 mm | |
| frame wire diameter | 11 mm | |
| leg outward projection from table edge | 100 mm | |
| base floor contact perimeter | 760 x 760 mm | |
| corner radius of tabletop | 30 mm | |
| under-table floor clearance | 342 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| net product weight | 16 kg | |
|---|---|---|
| distributed static top load capacity | 45 kg | |
| surface scratch resistance | 2000 abrasion cycles | |
| frame corrosion resistance rating | Class 2 indoor use | |
| recommended maximum items per surface | 8 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| tabletop substrate | 18mm MDF core with white matte laminate finish | |
|---|---|---|
| tabletop edge banding | 1mm matching white PVC edge trim | |
| frame construction | 11mm diameter cold-rolled steel wire, polished chrome plating | |
| floor glides | Injection-molded nylon glides on all wire contact points | |
| joint fasteners | M6 zinc-plated steel connector bolts with lock washers | |
| frame welding points | TIG welded joints at leg and crossbar intersections | |
| surface finish thickness (frame) | 0.3 micron chrome plating over nickel undercoat | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| floor leveling | Fixed non-adjustable nylon glides for level carpet/hard floor placement | |
|---|---|---|
| assembly requirement | Flat-pack assembly with included hex key and hardware kit | |
| surface maintenance | Non-porous smooth top enables wipe-clean with standard neutral cleaners | |
| base stability | Sled perimeter wire frame eliminates tipping risk under normal lounge use | |
| stacking compatibility | Non-stackable fixed wire base design | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| office reception lounge | Placed between visitor seating to hold beverages, reading materials and small decor | |
|---|---|---|
| breakout collaboration area | Supports casual meetings with low seating in open office environments | |
| hotel lobby waiting zone | Coordinates with upholstered lounge seating for guest waiting areas | |
| residential living room | Suits modern minimalist interiors as a central low table for sofa arrangements | |
| cafe lounge seating | Used in casual cafe seating areas for customer tabletop needs at seated height |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic tables, applicable for lounge use | |
|---|---|---|
| EN 1022:2018 | Furniture - Seating and tables - Determination of stability | |
| EN 13722:2004 | Furniture - Test methods for surface resistance to cold liquids |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to tabletop substrate and finish | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture general technical requirements, applicable to chrome steel frame | |
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletop substrate and finish; 2. GB/T 3325-2017: Metal furniture general technical requirements, applicable to chrome steel frame; 3. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool