| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall nested dimensions (large table outer envelope) | 800 x 800 x 450 mm | |
|---|---|---|
| Large tabletop diameter | 800 mm | |
| Large table total height | 450 mm | |
| Small tabletop diameter | 650 mm | |
| Small table total height | 400 mm | |
| Tabletop thickness | 18 mm | |
| Large table lower ring base diameter | 760 mm | |
| Small table lower ring base diameter | 610 mm | |
| Vertical support leg cross-section | 20 x 20 mm | |
| Metal tube wall thickness | 1.2 mm | |
| Base ring tube diameter | 25 mm | |
| Floor clearance under lower base ring | 20 mm | |
| Edge overhang from frame to tabletop edge | 20 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall |
Net weight / load capacity / users / durability
| Large table distributed static load capacity | 100 kg | |
|---|---|---|
| Tabletop surface abrasion resistance | 2000 cycles | |
| Tabletop heat resistance temperature | 120 °C | |
| Frame static stability lateral load | 30 kg | |
| Total set net weight | 24 kg | |
| Surface water resistance rating | IPX4 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large tabletop | High-density MDF core with white marble-veined laminate top layer | |
|---|---|---|
| Small tabletop | High-density MDF core with black marble-veined high-gloss laminate top layer | |
| Table edge trim | Matching black PVC edge banding with rounded profile | |
| Frame support legs | Powder-coated carbon steel square tubing | |
| Lower circular base rings | Powder-coated carbon steel round tubing | |
| Frame connection hardware | Zinc-plated steel bolt and bracket fasteners | |
| Floor protection pads | 3 mm thick non-slip EVA rubber pads | |
| Frame surface finish | Matte black electrostatic powder coating | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Space-saving nesting operation | Small table slides fully partially under large table to reduce footprint when not in use | |
|---|---|---|
| Independent use function | Both tables can be separated and used as standalone accent surfaces | |
| Fixed non-adjustable structure | All frame components are rigidly assembled with no height adjustment, folding, or moving parts | |
| Wipe-clean surface maintenance | Smooth non-porous tabletop allows cleaning with damp cloth without staining | |
| Scratch-resistant tabletop protection | Hard laminate surface resists scuffs from everyday objects like mugs, books, and decor | |
| Floor protection function | Integrated rubber foot pads prevent hard metal contact with hard flooring surfaces | |
| Level installation capability | Minor height adjustment via integrated foot pads to compensate for uneven floors | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Living room sofa front placement | Positioned in front of sofas or sectionals to hold drinks, books, remote controls, and decor | |
|---|---|---|
| Small apartment space optimization | Nesting design allows compact storage for small living areas or studio apartments | |
| Office lounge/reception use | Used in reception areas or breakout spaces for guest refreshments and reading materials | |
| Flexible multi-surface hosting | Separated tables provide additional surface area for parties or gatherings when extra display space is needed | |
| Modern minimalist interior schemes | Black and white marble-veined finish pairs with contemporary, industrial, or Scandinavian decor styles |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Strength, durability and safety requirements for domestic tables, applicable to home living room use | |
|---|---|---|
| EN 1022:2018 | Domestic furniture seating stability test, applicable to table stability evaluation | |
| EN 13722:2004 | Performance requirements for metal furniture frames, applicable to powder-coated steel structure |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to MDF core tabletop components | |
|---|---|---|
| GB/T 24821-2009 | Performance requirements for metal furniture, applicable to steel frame structure | |
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable to MDF core material | |
| GB/T 4893.8-2013 | Surface abrasion resistance test method for furniture surfaces, applicable to tabletop finish |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to MDF core tabletop components; 2. GB/T 24821-2009: Performance requirements for metal furniture, applicable to steel frame structure; 3. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable to MDF core material; 4. GB/T 4893.8-2013: Surface abrasion resistance test method for furniture surfaces, applicable to tabletop finish; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
