| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Finished Top Thickness | 45 mm | |
|---|---|---|
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Set total net weight | 25 kg | |
|---|---|---|
| Static distributed load per table | 50 kg | |
| Frame finish scratch resistance | 2H pencil hardness | |
| Tabletop surface heat resistance | 120 °C | |
| Recommended number of users | 4 | |
| Static stability lateral tilt load | 15 kg | |
| Surface stain resistance rating | Grade 5 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large table tabletop | Grey matte stone-effect sintered stone slab | |
|---|---|---|
| Small table tabletop | White marble-veined stone-effect sintered stone slab | |
| Support frames | Matte black powder-coated carbon steel | |
| Frame weld points | TIG-welded joints with ground smooth finish | |
| Table edge trim | Matching black powder-coated steel edge band | |
| Foot pads | Non-marking TPE rubber anti-slip pads | |
| Assembly hardware | Zinc-plated steel hex bolts and lock washers | |
| Surface finish | Low-sheen matte protective coating on metal frames | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Partial nesting storage | Small table tucks 400mm beneath large table to save 0.24 sqm floor space | |
|---|---|---|
| Dual-surface flexible use | Tables can be separated for additional serving space or nested for compact layout | |
| Easy-clean non-porous surface | Tabletops wipe clean with damp cloth, no sealing required for regular use | |
| Floor protection | Rubber foot pads prevent scuffing on hard flooring and carpet indentation | |
| Stable cross-brace support | Geometric cross frame eliminates wobble on uneven floor surfaces up to 3mm slope | |
| Rounded edge safety | Smooth rounded table edges reduce impact injury risk for households with children | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Small apartment space-saving use | Nested configuration reduces footprint for compact urban living rooms and studios | |
|---|---|---|
| Contemporary interior styling | Matches modern minimalist, industrial, and scandinavian decor schemes with neutral two-tone finish | |
| Residential lounge serving use | Supports placement of snacks, reading material, remotes and decorative objects for daily use | |
| Reception lounge auxiliary use | Suitable for small office reception areas or lounge waiting spaces for guest refreshment service |
EU Market Access Requirements* EN Standards
| Residential furniture safety requirement | EN 12521:2015 Furniture – Strength, durability and safety for domestic tables | |
|---|---|---|
| Surface scratch resistance test | EN 15186:2012 Furniture – Assessment of surface resistance to scratching |
Standards applicable to China-market projects
| Table dimensional tolerance | GB/T 3324General technical requirements for wooden furniture | |
|---|---|---|
| Surface coating adhesion | GB/T 4893.4Test for surface adhesion of furniture coatings | |
| Furniture stability test | GB/T 10357.1Test for mechanical stability of tables | |
| Metal furniture coating corrosion resistance | GB/T 13667.1General technical requirements for steel furniture |
This product must meet the following technical requirements: 1. Table dimensional tolerance: GB/T 3324General technical requirements for wooden furniture; 2. Surface coating adhesion: GB/T 4893.4Test for surface adhesion of furniture coatings; 3. Furniture stability test: GB/T 10357.1Test for mechanical stability of tables; 4. Metal furniture coating corrosion resistance: GB/T 13667.1General technical requirements for steel furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
