Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	900 × 900 × 380 mm
Lower tier diameter	900 mm
Upper rotating tier diameter	700 mm
Lower tier plinth height	250 mm
Upper rotating tier height (top of surface)	380 mm
Tabletop thickness (both tiers)	25 mm
Maximum extended offset (upper tier rotated)	400 mm
Plinth base wall thickness	3 mm
Floor clearance under plinth	2 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Distributed static load per tier	59 kg
Product net weight	64 kg
Rotation mechanism cycle rating	15000 cycles
Surface scratch resistance (pencil hardness)	3H
Water and stain resistance rating	Level 4
Recommended maximum decorative item weight on upper tier	25 kg
Warranty period for residential use	90 days
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Lower tier plinth and top substrate	1.2mm thick cold-rolled steel
Upper tier plinth and top substrate	1.2mm thick cold-rolled steel
Tabletop surface coating	Electroplated metallic finish with clear anti-scratch topcoat
Rotation swivel bearing	Zinc-plated steel heavy-duty lazy susan bearing
Plinth base bottom padding	2mm thick non-slip EVA felt pads
Edge banding	Fully welded and polished rounded steel edge
Internal plinth reinforcement	1.5mm thick steel cross bracing
Finish type (lower tier)	Brushed bronze PVD plating
Finish type (upper tier)	Brushed silver chrome plating
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

360° upper tier rotation	Upper tier rotates freely around central bearing to create extended surface area
Nested space-saving design	Upper tier sits concentrically over lower tier when not in use
Offset extended serving position	Upper tier rotates to partially extend beyond lower tier perimeter
Floor protection function	Non-slip felt pads on plinth base prevent scuffing on carpet and hard floors
Easy maintenance surface	Sealed metallic finish wipes clean with dry or damp microfiber cloth
Tool-free setup	Pre-assembled nested tiers require no on-site assembly
Anti-wobble stability	Wide low plinth base creates low center of gravity to prevent tipping
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Living room placement	Position directly in front of 3-seat or L-shaped sofas for beverage and decor display
Luxury residential use	Suitable for modern, contemporary, or minimalist luxury interior design schemes
Lounge and reception areas	Appropriate for upscale office reception lounges and hotel lobby seating zones
Small apartment space optimization	Rotating nested design expands usable surface without requiring large permanent footprint
Decor display primary use	Supports stacked books, sculptural objects, and table lamps on dual offset surfaces
Recommended floor surfaces	Safe for low-pile carpet, hardwood, luxury vinyl tile, and polished concrete floors

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 15372:2016	Furniture – Strength, durability and safety for domestic tables applicable to performance verification
EN 12521:2015	Furniture – Mechanical safety requirements for domestic tables applicable to stability testing

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture applicable to quality inspection of metal-framed living room tables
GB/T 4893.8-2013	Surface wear resistance test method applicable to verification of metallic top durability
GB/T 4893.1-2021	Surface liquid resistance test method applicable to anti-stain performance checks
GB/T 10357.1-2013	Table static load test method applicable to load capacity verification

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture applicable to quality inspection of metal-framed living room tables;
2. GB/T 4893.8-2013: Surface wear resistance test method applicable to verification of metallic top durability;
3. GB/T 4893.1-2021: Surface liquid resistance test method applicable to anti-stain performance checks;
4. GB/T 10357.1-2013: Table static load test method applicable to load capacity verification;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CT-ROT-2T-PLIN-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CT-ROT-2T-PLIN-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CT-ROT-2T-PLIN-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Two-Tier 360° Rotating Nested Round Plinth Coffee Table features a sleek, sculptural legless form defined by dual round tiers and solid, low-profile plinth bases, finished in complementary brushed metallic tones. When nested for compact storage, the brushed silver chrome upper tier sits concentrically atop the wider brushed bronze lower tier, presenting a streamlined symmetrical silhouette; when rotated, the upper tier extends partially beyond the lower tier’s perimeter to create expanded, tiered display and serving space without a bulky permanent footprint. Constructed entirely from cold-rolled steel with internal steel cross-bracing for structural rigidity, the table features fully welded, polished rounded edges and an electroplated metallic surface sealed with a clear anti-scratch topcoat. The heavy-duty zinc-plated steel lazy susan bearing enables smooth 360-degree rotation of the upper tier, while 2mm non-slip EVA felt pads line the bottom of each plinth base to protect floor surfaces. Both tabletops have a smooth reflective finish, supported by wide, low plinths that create a low center of gravity for anti-wobble stability and resistance to tipping. Functionally, the table supports flexible use through its rotating design, allowing users to toggle between a space-saving nested configuration and an extended offset layout for serving or display. The sealed surface wipes clean easily with a dry or damp microfiber cloth, and the unit arrives pre-assembled in nested tiers to eliminate on-site assembly work. Each tier supports an evenly distributed static load, with a recommended maximum weight for decorative items placed on the upper tier to preserve smooth rotation performance. This coffee table is well suited for both residential and commercial spaces: it works as a central living room piece positioned in front of 3-seat or L-shaped sofas in modern, contemporary, or minimalist luxury homes, and fits equally well in upscale office reception lounges and hotel lobby seating zones. Its nested design also makes it ideal for small apartment layouts where flexible surface area is a priority, and it is safe for use on low-pile carpet, hardwood, luxury vinyl tile, and polished concrete floors. When planning procurement, note that the unit ships across two cartons per set, with a 90-day warranty covering residential use, and the reflective two-tone finish pairs best with curated decor including stacked books, sculptural objects, and table lamps.

Two-Tier 360° Rotating Nested Round Plinth Coffee Table Specifications

Suppliers and stock