Name: 2-Piece Square Nesting Coffee Table Set with Stone-Look Tops and Black Metal Legs
Brand: Youwei
SKU: W3UGQE

Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	800 × 700 × 460 mm
Overall large table dimensions	800 x 700 x 460 mm
Overall small table dimensions	800 x 600 x 400 mm
Tabletop thickness	15 mm
Leg cross-section at top	30 x 30 mm
Leg cross-section at floor contact	15 x 15 mm
Nesting clearance under large table	390 mm
Floor gap under large table apron	430 mm
Corner leg offset from table edge	20 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Distributed static load per tabletop	50 kg
Net weight of large table	22 kg
Surface heat resistance	120 °C
Surface abrasion resistance	2000 cycles
Floor protector load rating per leg	20 kg
Recommended maximum display item weight	15 kg
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Large tabletop	Black veined sintered stone-look engineered surface, matte smooth finish
Small tabletop	White marble-effect sintered stone-look engineered surface, matte smooth finish
Legs and frame	1.2mm thick powder-coated black carbon steel, tapered square profile
Table edge treatment	Eased polished square edge, no raised lip
Floor contact pads	3mm thick non-slip rubber pads, pre-attached to leg bottoms
Frame connection hardware	M8 zinc-plated steel bolts and lock nuts
Underside support battens	15mm thick powder-coated steel crossbars under each tabletop
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Nesting storage function	Small table slides fully under large table to reduce footprint when not in use
Dual-surface use function	Both tables provide independent flat display surfaces for drinks, reading materials and decor
Surface cleaning function	Smooth non-porous surfaces wipe clean with a soft damp cloth, no harsh detergents required
Floor protection function	Pre-attached rubber leg pads prevent scuffs and scratches on hard floors and rugs
Flexible arrangement function	Tables can be separated for side table use or positioned together as a larger combined surface
Static level stability	Fixed four-leg design provides stable non-rocking placement on flat even floors
Interlocking overlap depth when nested	600 mm
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential living room use	Placed in front of sofas or sectionals as a central coffee table for daily leisure and display
Small apartment and studio use	Nesting design saves floor space when extra surface area is not required
Modern and light luxury interiors	Black and white two-tone stone finish coordinates with minimalist, contemporary and neutral decor schemes
Temporary event display use	Lightweight separate tables can be moved to hold refreshments or decor for small home gatherings
Home office lounge use	Can be placed in reception or break areas to hold reading materials and beverages for guests

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Furniture – Strength, durability and safety for domestic tables, recommended for structural performance verification
EN 13722:2004	Furniture – Test methods for surface resistance to cold liquids, recommended for tabletop stain resistance checks

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to surface finish and structural stability inspection
GB/T 4893.4-2013	Surface wear resistance test method for furniture finishes, recommended for tabletop durability validation
GB 18584-2001	Limit of harmful substances in wooden furniture, applicable to finish emission testing for interior use

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to surface finish and structural stability inspection;
2. GB/T 4893.4-2013: Surface wear resistance test method for furniture finishes, recommended for tabletop durability validation;
3. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable to finish emission testing for interior use;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · NCT-SQ-8070-BW-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · NCT-SQ-8070-BW-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · NCT-SQ-8070-BW-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Youwei NCT-SQ-8070-BW-01 2-Piece Square Nesting Coffee Table Set anchors modern and light luxury interiors with its clean, minimalist aesthetic and thoughtful two-tone finish. The set features two square tables sized for flexible placement: the larger table holds a black veined sintered stone-look engineered top with a matte smooth finish, while the smaller table pairs a white marble-effect sintered stone-look matte surface for subtle visual contrast. Both tables use tapered square powder-coated black carbon steel legs set 20mm inward from eased polished square table edges, with no raised lip to interrupt the clean silhouette. When nested, the smaller table slides fully under the larger unit to cut down on unused floor space, with a 600mm interlocking overlap that keeps the configuration tidy. Construction prioritizes durability and long-term stability, with multi-layer composite tabletop builds that reach 40mm at load-bearing sections, paired with 15mm thick powder-coated steel crossbatten supports under each surface. The 1.2mm thick steel legs use M8 zinc-plated steel bolts and lock nuts for rigid frame connections, with pre-attached 3mm non-slip rubber pads at each foot. Tabletops hold a uniform distributed static load of 150kg, with heat resistance up to 120°C and abrasion resistance rated for 2000 cycles of regular use, while each rubber floor pad supports 20kg of weight to prevent surface damage. Dual independent surfaces provide functional flexibility: users can position the tables together for a larger contiguous display area, separate them to use as standalone side tables, or tuck the smaller unit away when extra space is needed. The non-porous smooth tops wipe clean with a soft damp cloth, requiring no harsh cleaning products, and the fixed four-leg design delivers steady, non-rocking placement on even flat floors. This set is well suited for residential living rooms positioned in front of sofas or sectionals for daily leisure and decor display, small apartments and studios where floor space is limited, modern minimalist interiors that coordinate with its black and white neutral palette, home office lounge and reception areas for holding reading materials and beverages, and small home gatherings where separate tables can be moved to serve refreshments. Procurement teams should note each set ships across two cartons, with a packaged gross weight of 90kg and total packaging volume of 0.55 m³, and requires 40 minutes of assembly per unit; the recommended maximum weight for displayed items on each surface is 15kg to preserve long-term finish and structural integrity.

2-Piece Square Nesting Coffee Table Set with Stone-Look Tops and Black Metal Legs Specifications

Suppliers and stock