| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Finished Top Thickness | 45 mm | |
|---|---|---|
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Large table total weight | 22 kg | |
|---|---|---|
| Small table total weight | 16 kg | |
| Large table top static load capacity | 80 kg | |
| Base stability tilt angle | 15 degrees | |
| Floor load per table | 0.05 MPa | |
| Recommended set weight capacity for distributed items | 100 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large table tabletop | White engineered stone with grey marble veining, polished smooth finish | |
|---|---|---|
| Small table tabletop | White engineered stone with grey marble veining, polished smooth finish | |
| Large table support base | 1.5mm thick cold-rolled steel, matte black powder-coated finish | |
| Small table support base | 1.5mm thick cold-rolled steel, matte black powder-coated finish | |
| Tabletop to base connection | M8 steel mounting bolts with rubber anti-slip gaskets | |
| Base bottom floor protector | 3mm thick non-woven felt pad adhered along full contact edge | |
| Tabletop edge finish | Bullnose rounded edge with 5mm radius, polished to match top surface | |
| Base surface treatment | Electrostatic matte black powder coating, scratch-resistant grade 3H | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nesting storage function | Small table slides partially under large table to reduce occupied floor space by 40% when not in use | |
|---|---|---|
| Separate use function | Two tables can be placed independently as separate coffee table and side table for flexible seating arrangements | |
| Surface anti-stain function | Polished non-porous tabletop surface resists liquid spills from common beverages, requires only wipe cleaning | |
| Anti-tip stability function | Wide flared conical base lowers center of gravity to prevent tipping when items are placed on table edges | |
| Floor protection function | Full perimeter felt pads on base bottoms eliminate metal-to-floor contact to prevent scratches and reduce movement noise | |
| Assembly requirement | Minimal assembly required, only attaching tabletops to pre-built bases with included hardware, no complex joining needed | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Modern living room application | Placed in front of sofas in small to medium apartments to provide dual-level surfaces for drinks, books and decor | |
|---|---|---|
| Lounge seating area application | Used in hotel or office lounge waiting areas for flexible surface access for guests | |
| Staggered layout configuration | Arranged in offset positions to create layered visual interest instead of a single monolithic table | |
| Side table supplementary use | Smaller unit can be pulled out for use as an extra side table next to armchairs during gatherings | |
| Hard floor suitability | Recommended for use on hardwood, tile, or laminate flooring with felt base pads to prevent surface damage | |
| Residential rental furnishing | Suitable for furnished rental properties due to durable low-maintenance surfaces and stable construction |
EU Market Access Requirements* EN Standards
| Residential table safety requirement | EN 12521:2015 | |
|---|---|---|
| Surface wear resistance test | EN 15185:2011 |
Standards applicable to China-market projects
| Table stability test | GB/T 10357.2 | |
|---|---|---|
| Table surface durability test | GB/T 4893.1 | |
| Metal coating adhesion test | GB/T 9286 | |
| Formaldehyde emission limit | GB 18584 |
This product must meet the following technical requirements: 1. Table stability test: GB/T 10357.2; 2. Table surface durability test: GB/T 4893.1; 3. Metal coating adhesion test: GB/T 9286; 4. Formaldehyde emission limit: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
