| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1400 x 800 x 450 mm | |
|---|---|---|
| Tabletop thickness | 18 mm | |
| Tabletop edge trim thickness | 15 mm | |
| Vertical support leg section | 80 x 40 mm | |
| Leg wall thickness | 1.5 mm | |
| Base cross brace width | 60 mm | |
| Floor contact pad diameter | 50 mm | |
| Under-table knee clearance height | 422 mm | |
| Tabletop end radius | 400 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop distributed static load | 50 kg | |
|---|---|---|
| Point impact resistance | 10 kg dropped from 300 mm | |
| Net product weight | 55 kg | |
| Recommended maximum decor weight | 25 kg | |
| Finish abrasion resistance | 2000 rub cycles | |
| Surface water resistance rating | IPX4 | |
| Wobble deflection at full load | 2 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface | Polished white veined sintered stone | |
|---|---|---|
| Tabletop edge trim | Black PVC/metal edge banding | |
| Support legs | Black powder-coated carbon steel tube | |
| Cross bracing frame | Welded carbon steel square tubing | |
| Floor protection pads | Non-slip EVA rubber pads | |
| Metal finish coating | High-temperature baked matte black paint | |
| Stone sealant layer | Nano anti-fouling polished coating | |
| Frame weld joints | Ground smooth welded connections | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Surface function | Flat non-porous top for beverage service, book and decorative display | |
|---|---|---|
| Base stability | Three-point angled V-brace frame prevents wobble on level hard floors | |
| Floor protection | Integrated rubber pads prevent scuffing on tile, wood and carpet flooring | |
| Cleaning access | Open frame design allows full floor access under table for vacuuming | |
| Assembly requirement | Knock-down construction requiring leg attachment to tabletop frame | |
| Coordinating furniture compatibility | Matches round side table with identical stone top and black base design | |
| Load distribution | Even weight transfer across three leg sets prevents stone top cracking under load | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room | Centered in front of 3-seater upholstered sofas for lounge beverage and decor use | |
|---|---|---|
| Apartment lounge space | Sized for small to medium living rooms without blocking walkways | |
| Office reception area | Used in guest waiting areas paired with upholstered lounge seating | |
| Coordinating set application | Paired with matching round side tables placed adjacent to sofa arms | |
| Hard flooring use | Suitable for tile, polished concrete and engineered wood floors | |
| Light commercial lounge | Approved for low-traffic hotel lobby and lounge breakout spaces |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Domestic furniture strength, durability and safety requirements for tables, applicable for domestic lounge use | |
|---|---|---|
| EN 15372:2008 | Furniture mechanical and structural safety requirements for non-domestic tables, applicable for light contract use |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to stone-top metal furniture frame stability | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances for interior decoration wood furniture, applicable to adhesive and coating emissions | |
| GB/T 4893.9-2013 | Furniture surface test for impact resistance, applicable to stone tabletop performance validation |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to stone-top metal furniture frame stability; 2. GB 18584-2001: Limit of harmful substances for interior decoration wood furniture, applicable to adhesive and coating emissions; 3. GB/T 4893.9-2013: Furniture surface test for impact resistance, applicable to stone tabletop performance validation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
