Product supplierModern Rectangular White Veined Stone Coffee Table with Sculptural Dark Metal Legs, 12mm polished sintered stone with linear grey veining, soft rounded corners
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1400 × 750 × 450 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Leg width (single U-leg) | 180 mm | |
| Leg height (floor to tabletop underside) | 438 mm | |
| Leg wall thickness | 8 mm | |
| Corner radius (tabletop rounded edge) | 30 mm | |
| Floor clearance under table center | 380 mm | |
| Tabletop overhang beyond leg outer edge | 50 mm | |
| Distance between two supporting legs | 900 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Assembled net weight | 45 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 50 kg | |
| Sintered stone surface heat resistance | 180 °C | |
| Powder coat finish abrasion resistance | 2000 cycles | |
| Leg floor load per contact point | 14 kg | |
| Recommended maximum single-point placed load | 20 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop substrate | 12mm polished sintered stone with linear grey veining, soft rounded corners | |
|---|---|---|
| Tabletop edge finish | Polished straight cut edge matching surface finish | |
| Supporting legs | 8mm thick welded steel plate with dark bronze matte powder coat | |
| Leg floor contact pads | Non-marking anti-slip rubber pads at each leg base | |
| Tabletop-to-leg connection hardware | M8 zinc-plated steel bolts with pre-installed threaded inserts | |
| Metal surface treatment | Matte anti-fingerprint powder coating, corrosion resistant for indoor use | |
| Sintered stone surface property | Non-porous, stain-resistant polished finish | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Structural design | Fixed rigid structure with no moving parts, lift mechanism or storage compartments | |
|---|---|---|
| Surface function | Flat polished top suitable for placing drinks, decor, books and light serving items | |
| Leveling adjustment | Optional removable adjustable foot pads under each leg to compensate for uneven floors | |
| Cleaning function | Non-porous stone surface allows wipe-clean maintenance with standard household cleaners | |
| Assembly configuration | Flat-pack assembly requiring leg attachment to tabletop underside with included hardware | |
| Floor protection | Rubber contact pads prevent metal leg scuffing on hard flooring and low-pile carpet | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Primary application space | Residential living rooms, positioned directly in front of standard sofas | |
|---|---|---|
| Secondary application space | Modern apartment open-plan lounge areas, hotel executive lounge seating zones | |
| Recommended matching furniture | Low-profile fabric or leather sofas with 450 mm seat height | |
| Suitable user groups | Design-focused residential buyers, small apartment dwellers, boutique commercial lounge operators | |
| Usage notes | Intended for indoor dry environment use only, not suitable for outdoor exposure | |
| Recommended placement | Centered 400 mm from front edge of sofa for easy access to placed items |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture for domestic use, tables, strength and safety requirements for structural verification | |
|---|---|---|
| EN 15187:2006 | Furniture, test for assessment of surface resistance to dry heat for tabletop performance |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural stability verification | |
|---|---|---|
| GB/T 4893.4-2013 | Surface abrasion resistance test for furniture surfaces, applicable for finish durability acceptance | |
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable for indoor air quality verification |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural stability verification; 2. GB/T 4893.4-2013: Surface abrasion resistance test for furniture surfaces, applicable for finish durability acceptance; 3. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable for indoor air quality verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool