Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	800 × 800 × 450 mm
Overall set footprint (fully nested)	800 x 800 x 450 mm
Large table diameter	800 mm
Large table surface height	450 mm
Small table diameter	600 mm
Small table surface height	500 mm
Tabletop thickness	12 mm
Central support leg section	50 x 50 mm
Angled side leg section	30 x 30 mm
Floor rest bar height above floor	20 mm
Nesting slide clearance under large table	380 mm
Table edge radius	10 mm
Frame base footprint (large table)	720 x 720 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Total set net weight	34 kg
Large table static distributed load capacity	70 kg
Surface heat resistance	1290 °C
Powder coat finish adhesion durability	1000 hours
Tabletop abrasion resistance	6000 revolutions
Frame stability overturning load (edge)	20 kg
Recommended maximum number of users for placement	4
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Large tabletop	12mm white marble-veined sintered stone, polished smooth surface, dark edge trim
Small tabletop	12mm white marble-veined sintered stone, matching finish and edge trim
Central support legs	Matte black powder-coated square steel tube, 50x50mm section, 1.5mm wall thickness
Angled side support legs	Matte black powder-coated rectangular steel tube, 30x30mm section, 1.2mm wall thickness
Horizontal floor rest bars	Matte black powder-coated rectangular steel tube, welded to leg assembly for rigidity
Foot pads	Non-slip polyethylene glides, attached to base bottom to prevent floor scratches
Table edge trim	Thin black PVC edge banding, secured around sintered stone perimeter for impact protection
Frame weld joints	Ground and powder-coated to match frame finish, no exposed sharp edges
Surface finish (metal)	Matte textured black powder coating, corrosion and peel resistant
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Manual nesting function	Small table slides fully under large table via open base clearance to save floor space
Dual-height surface use	Two level surfaces allow separate display of decor, reading materials, and serving items
Fixed height structure	No height adjustment, lift-top, or moving mechanisms for low-maintenance stability
Easy-clean surface	Non-porous sintered stone top wipes clean with damp cloth, no sealing required
Scratch and heat resistant top	Supports placement of hot mugs, decor, and magazines without surface damage
Tool-light assembly	Knock-down assembly with included hardware, no specialized tools required
Floor protection design	Soft glide feet prevent scuffing on hardwood, tile, and carpeted floors
Multi-position arrangement	Tables can be positioned side-by-side, offset, or fully nested for flexible layout
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Living room sofa front placement	Positioned in front of 3-seat or sectional sofas for holding drinks, decor, and reading materials
Small apartment space saving	Nesting design reduces footprint when not in use, ideal for compact urban living rooms
Apartment lounge and reception areas	Used in casual reception spaces for lightweight serving and decorative display
Coordinated modern minimalist interiors	Matches neutral color palettes with white veined top and black frame for contemporary decor
Flexible side table use	Smaller table can be pulled out for use as an end table next to armchairs
Low-maintenance household use	Suitable for busy households with children due to scratch-resistant, easy-clean surfaces

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Furniture for domestic use, strength and stability requirements for tables, applicable to load and safety verification
EN 15372:2008	Furniture surface resistance to cold liquids, applicable to sintered stone stain resistance testing

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to stone-top metal frame tables for flatness and stability
GB/T 4893.9-2013	Furniture surface test for heat resistance, applicable to sintered stone tabletop performance verification
GB 28007-2011	Furniture mechanical safety requirements, applicable to edge rounding and structural stability testing

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to stone-top metal frame tables for flatness and stability;
2. GB/T 4893.9-2013: Furniture surface test for heat resistance, applicable to sintered stone tabletop performance verification;
3. GB 28007-2011: Furniture mechanical safety requirements, applicable to edge rounding and structural stability testing;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · NCT-RND-8060-WHT-BLK

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · NCT-RND-8060-WHT-BLK

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · NCT-RND-8060-WHT-BLKOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This 2-piece round nesting coffee table set features a modern minimalist design defined by smooth rounded edges, pairing white marble-veined sintered stone tabletops with a matte black metal frame for a sleek, contemporary look. When fully nested, the two tables form a compact, unified footprint; the larger table sits at a lower surface height, while the smaller table sits slightly higher, with an open base that allows it to slide completely beneath the larger unit to reduce occupied floor space when not in active use.
Each tabletop is crafted from sintered stone with a polished smooth surface, finished with thin black PVC edge banding around the perimeter for impact protection. The support structure uses matte black powder-coated steel tubing: central support legs for the larger table use thicker square tubing, while angled side supports use thinner square tubing, connected to horizontal floor rest bars via welded joints that are ground smooth and coated to match the frame, eliminating exposed sharp edges. Non-slip polyethylene glides attach to the base of each leg to prevent floor scratches, and the matte textured powder coat finish resists corrosion and peeling. The sintered stone surface is non-porous, heat and scratch resistant, requiring no sealing and wiping clean easily with a damp cloth. The set uses a fixed-height structure with no moving adjustment mechanisms to support long-term, low-maintenance stability. The two tiered, separate surfaces accommodate staged display of decor, reading materials, and serving items; the smaller table can be pulled out for standalone use as an end table beside armchairs as needed.
This set is well suited for placement in front of three-seat or sectional sofas in residential living rooms, particularly compact urban apartments where space saving is a priority, as well as casual apartment lounge and reception areas for light serving and decorative display. Its neutral, coordinated finish pairs seamlessly with modern minimalist interiors and neutral color palettes, and its durable, easy-clean surfaces make it appropriate for busy households. For procurement, note the set ships in two cartons, requires assembly with included hardware without specialized tools, supports placement for up to four users, and features non-marking feet safe for hardwood, tile, and carpeted flooring.

2-Piece Round Nesting Coffee Table Set, White Marble-Veined Sintered Stone Top with Black Metal Frame Specifications

Suppliers and stock