Product supplierNested Sintered Stone Top Coffee Table Set, 2-Piece, 12mm polished sintered stone with grey-white marble-look pattern
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 700 × 700 × 450 mm | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Large table total weight | 42 kg | |
|---|---|---|
| Small table total weight | 28 kg | |
| Tabletop uniform static load capacity | 50 kg | |
| Tabletop impact resistance | Grade 1 | |
| Base floor contact area per table | 2025 cm² | |
| Tabletop surface heat resistance | 180 °C | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Large table tabletop | 12mm polished sintered stone with grey-white marble-look pattern | |
|---|---|---|
| Small table tabletop | 12mm polished sintered stone matching large table pattern | |
| Tabletop edge trim | Matte dark grey PVC edge banding | |
| Large table pedestal base | 1.5mm thick cold-rolled steel with gunmetal matte powder coat | |
| Small table pedestal base | 1.5mm thick cold-rolled steel with matching gunmetal matte powder coat | |
| Base bottom glides | 4mm thick non-slip PE floor protection pads | |
| Structural connection hardware | M8 zinc-plated steel bolts securing top to base | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Nesting design | Small table slides partially under large table to save floor space | |
|---|---|---|
| Fixed height design | Both tables have non-adjustable fixed height for stable surface placement | |
| Scratch-resistant surface | Sintered stone top resists scratches from daily use with keys, ceramics and decor | |
| Stain-resistant surface | Non-porous sintered stone top prevents penetration from spilled drinks and stains | |
| Level placement | Underside glides adjust slightly to compensate for minor uneven floor surfaces | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential living room | Placed in front of sofas for serving drinks, displaying decor and casual use | |
|---|---|---|
| Office reception area | Used in lounge zones for guest refreshments and decorative display | |
| Small apartment layouts | Nesting function saves floor space when not in use, suitable for compact rooms | |
| Model home staging | Coordinated two-piece design creates layered visual effect for showroom display | |
| Hotel lounge areas | Durable scratch-resistant surface withstands high-traffic public use |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Furniture stability testing | EN 12521:2015 | |
|---|---|---|
| Surface abrasion resistance | EN 15185:2011 |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Tabletop surface performance | GB/T 39126 | |
|---|---|---|
| Metal furniture structural safety | GB/T 3324 | |
| Formaldehyde emission limit | GB 18584 |
Standardized tender description text
This product must meet the following technical requirements: 1. Tabletop surface performance: GB/T 39126; 2. Metal furniture structural safety: GB/T 3324; 3. Formaldehyde emission limit: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool