Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	800 × 800 × 480 mm
Overall set footprint (nested)	800 x 800 x 480 mm
Large table diameter	800 mm
Large table total height	480 mm
Small table diameter	660 mm
Small table total height	430 mm
Tabletop thickness	12 mm
Metal base wall thickness	1.5 mm
Large table base leg opening clearance	350 mm
Floor clearance under large table edge	120 mm
Table edge radius (rounded polish)	3 mm
Nested position depth offset between tables	200 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Total product net weight	21 kg
Static distributed load per tabletop	60 kg
Tabletop heat resistance	180 °C
Tabletop surface abrasion resistance	6000 cycles
Recommended maximum number of users	4
Metal frame anti-deformation static load	100 kg
Limited residential use warranty	3 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Large/small tabletops	12mm polished white veined sintered stone, rounded anti-collision edges
Geometric base frames	1.5mm thick carbon steel, dark gunmetal nano baked powder coating
Base floor contact points	Injection-molded PP plastic non-slip floor protection feet
Tabletop-base connection hardware	M8 zinc-plated steel hex screws with lock washers
Tabletop underside support panel	15mm thick E1 grade MDF reinforcement board
Metal surface finish coating thickness	80 μm
Tabletop sealed edge treatment	Clear epoxy resin edge seal
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Nesting interlocking function	Small table slides fully under large table to reduce footprint when not in use
Independent table use	Both tables can be positioned separately as side tables or combined coffee table
Surface maintenance	Non-porous sintered stone top wipes clean with damp cloth, resistant to common household stains
Floor protection function	Plastic base feet prevent scratches to hardwood, tile and carpet flooring
Assembly requirement	Simple 8-screw assembly attaching bases to tabletops, no special tools required
Anti-tip stability	Wide geometric base lowers center of gravity to prevent tipping under normal residential use
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Primary placement	Centrally positioned in front of 3-seater or L-shaped residential living room sofas
Secondary use case	Small table used as standalone side table next to armchairs or bedroom beds
Suitable property types	Small apartments, open-plan living areas, model home showrooms and modern office reception zones
Recommended style pairing	Pairs with light grey/neutral fabric or leather sofas in modern, light luxury or minimalist interiors
Functional use cases	Holding beverages, decorative objects, books and remote controls for daily living room use
Commercial suitability	Suitable for boutique hotel lobbies, lounge areas and high-end apartment common spaces

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Domestic furniture safety	EN 12521:2015
Surface durability testing	EN 15186:2011
Furniture stability testing	EN 1022:2018

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Tabletop material safety	GB 6566
Formaldehyde emission limit	GB 18580
Furniture structural safety	GB/T 3324
Surface coating safety	GB 18584

Standardized tender description text

This product must meet the following technical requirements:
1. Tabletop material safety: GB 6566;
2. Formaldehyde emission limit: GB 18580;
3. Furniture structural safety: GB/T 3324;
4. Surface coating safety: GB 18584;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · NCT-RD8060-GMW

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · NCT-RD8060-GMW

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · NCT-RD8060-GMWOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This 2-piece round nesting coffee table set balances sleek light luxury modern styling with flexible, space-efficient functionality for a range of residential and light commercial settings. Defined by smooth round tabletop silhouettes and open geometric pedestal bases, the set creates a light, uncluttered visual presence, with a smaller table that slides fully beneath the larger unit to minimize footprint when not in active use. The two tables can also be positioned independently as side tables, or arranged as a combined central coffee table to suit changing layout needs.
Each table features a polished white veined sintered stone top finished with rounded anti-collision edges and a clear epoxy resin edge seal, supported by an E1 grade MDF reinforcement panel secured to the frame with zinc-plated steel hex screws and lock washers. The geometric base frames are constructed from carbon steel with a dark gunmetal nano baked powder coating, finished with injection-molded PP plastic non-slip feet at floor contact points to prevent scratches on hardwood, tile, and carpet surfaces. The wide geometric base design lowers the unit’s center of gravity to resist tipping under normal use. The non-porous sintered stone surface wipes clean easily with a damp cloth and resists common household stains, with built-in heat and abrasion resistance for daily use. The set supports typical daily items including beverages, decorative objects, books, and remote controls for up to four users, and the larger table offers ample leg clearance beneath its frame. It also includes integrated cable management capacity to organize power and data cords as needed.
Ideal for central placement in front of 3-seater or L-shaped residential sofas, the set works well in small apartments, open-plan living areas, bedrooms, and model home showrooms, as well as modern office reception zones, boutique hotel lobbies, lounge areas, and high-end apartment common spaces. It pairs seamlessly with light grey or neutral fabric and leather seating in modern, light luxury, or minimalist interiors.
Procurement teams and buyers should note the set ships in two cartons per unit, with a simple 8-screw assembly that requires no special tools. The product includes a 3-year limited warranty for residential use, and its compact nested footprint makes it well suited for spaces where flexible seating and surface arrangements are a priority.

2-Piece Round Nesting Coffee Table Set with White Veined Top and Dark Gunmetal Geometric Metal Base Specifications

Suppliers and stock