| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (large table deployed, small table nested) | 900 x 900 x 470 mm | |
|---|---|---|
| Large table diameter | 900 mm | |
| Large table total height (floor to tabletop) | 470 mm | |
| Small table diameter | 600 mm | |
| Small table total height (floor to tabletop) | 430 mm | |
| Tabletop thickness | 15 mm | |
| Large pedestal base diameter | 450 mm | |
| Small pedestal base diameter | 300 mm | |
| Pedestal base wall thickness | 1.5 mm | |
| Floor clearance under large table overhang | 300 mm | |
| Tabletop edge bevel width | 5 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set net weight | 50 kg | |
|---|---|---|
| Large table distributed static load capacity | 50 kg | |
| Surface scratch resistance rating | Class 2 (≥2000 abrasion cycles) | |
| Surface heat resistance (temporary contact) | 120 °C | |
| Stability tilt load (200mm from table edge) | 15 kg | |
| Standard product warranty | 3 years | |
| Available finish variants | 4 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large table tabletop | 15mm polished marble-veined sintered stone panel with high-gloss clear sealant | |
|---|---|---|
| Small table tabletop | 15mm polished marble-veined sintered stone panel, matching large table pattern and finish | |
| Large table pedestal base | 1.5mm thick carbon steel cylinder with brushed brass PVD titanium coating | |
| Small table pedestal base | 1.5mm thick carbon steel cylinder with brushed brass PVD titanium coating, matching large base finish | |
| Base floor contact pads | 5mm thick non-slip EVA rubber pads bonded to base bottom | |
| Tabletop-to-base connection | M8 zinc-plated steel mounting bolts with threaded metal inserts in base top plate | |
| Tabletop underside reinforcement | 12mm thick MDF balancing panel bonded to stone top bottom | |
| Surface finish coating | Anti-fingerprint nano-ceramic clear top coat | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nesting storage function | Small table slides fully under large table overhang to reduce footprint to 0.81 m² when not in use | |
|---|---|---|
| Knock-down assembly | Tables assemble with 4 bolts per table using a standard Phillips screwdriver, no special tools required | |
| Surface use suitability | Glossy sealed top supports drinkware, decor, books and snacks with stain and water resistance | |
| Independent use capability | Each table functions as a standalone coffee or side table when separated for flexible layout | |
| Floor protection function | EVA base pads prevent scratching hard flooring and eliminate sliding noise during repositioning | |
| Leveling adjustment | Hidden adjustable feet on base bottom allow 5mm height adjustment for uneven floors | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Modern living room main seating area | Placed in front of 3seater sofas for shared drink and decor placement | |
|---|---|---|
| Small apartment flexible layout | Nested configuration saves floor space when additional surface area is not required | |
| Luxury residential lounge space | Brass finish and marble veining complement light luxury and contemporary interior schemes | |
| Reception waiting area use | Suitable for placing reading materials and refreshments for guests in office reception zones | |
| Open-plan lounge divider setup | Separated tables create functional zoning between living and dining zones without blocking sightlines |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Safety, strength and durability requirements for domestic dining and living tables | |
|---|---|---|
| EN 13722:2004 | Test methods for furniture table stability and structural integrity |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to MDF reinforcement components | |
|---|---|---|
| GB/T 4893.4-2013 | Surface wear resistance test method for furniture finishes, applicable to tabletop coating | |
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable to adhesive and finish materials |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to MDF reinforcement components; 2. GB/T 4893.4-2013: Surface wear resistance test method for furniture finishes, applicable to tabletop coating; 3. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable to adhesive and finish materials; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
