Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	800 × 800 × 460 mm
Set nesting overall footprint (separated)	1250 x 800 x 460 mm
Large table dimensions	800 mm diameter x 460 mm height
Small table dimensions	570 mm diameter x 380 mm height
Tabletop thickness	18 mm
Leg taper section	30 mm top diameter, 18 mm bottom diameter
Leg splay angle from vertical	18 degrees
Floor clearance under large table	442 mm
Floor clearance under small table	362 mm
Nesting overlap depth	320 mm
Edge profile radius	3 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Large table static distributed load capacity	50 kg
Set total net weight	25 kg
Tabletop surface Mohs hardness	7
Tabletop heat resistance	1200 °C
Frame powder coating corrosion resistance	500 hours salt spray resistance
Surface stain resistance rating	Grade 5
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Large tabletop	Dark grey sintered stone with white linear veining, polished finish
Small tabletop	White sintered stone with grey linear veining, polished finish
Legs for both tables	Powder-coated matte black steel, tapered conical splayed design
Leg-to-tabletop connectors	Zinc-plated steel M6 mounting bolts with locking washers
Foot pads	Non-slip 20mm diameter TPE floor-protective leveling pads
Tabletop core substrate	15mm high-density MDF (if laminated faux marble)
Surface finish layer	0.6mm high-gloss wear-resistant melamine veneer (laminated variant)
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Space-saving nesting function	Small table tucks fully under large table, reducing footprint to 800mm diameter
Flexible dual-surface use	Tables separate to provide two independent display/serving surfaces for entertaining
Leveling adjustment	TPE foot pads rotate 3mm to compensate for uneven hard flooring
Floor protection	Soft TPE foot pads eliminate metal-to-floor contact, preventing scratch damage to hard floors
Surface maintenance	Non-porous smooth surface wipes clean with a damp cloth, no sealing required
Stability design	Four outward-splayed legs per table create a wide support base to resist tipping
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Living room center table placement	Position in front of sofas or sectionals for holding drinks, books, and decor items
Small apartment and studio use	Nesting design saves floor space when not in use, ideal for compact living areas
Balcony accent furniture	Use as a lightweight side surface for potted plants and drinks on covered balconies
Office reception lounge use	Place in waiting areas or breakout spaces for guest refreshments and reading materials
Flexible entertaining use	Separate tables to create extra serving space during parties and gatherings

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Furniture for domestic use, tables: safety, strength and durability requirements
EN 15187:2006	Furniture, test for assessment of surface resistance to cold liquids
EN 15185:2011	Furniture, assessment of surface resistance to abrasion

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for table structural safety
GB/T 4893.1-2021	Furniture surface test for cold liquid resistance, applicable for tabletop stain performance
GB/T 4893.4-2013	Furniture surface abrasion resistance test, applicable for tabletop wear durability
GB/T 10357.1-2013	Furniture mechanical test for tables, static load and stability verification

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for table structural safety;
2. GB/T 4893.1-2021: Furniture surface test for cold liquid resistance, applicable for tabletop stain performance;
3. GB/T 4893.4-2013: Furniture surface abrasion resistance test, applicable for tabletop wear durability;
4. GB/T 10357.1-2013: Furniture mechanical test for tables, static load and stability verification;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · NCT-RND-2PC-FMBLK-8057

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · NCT-RND-2PC-FMBLK-8057

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · NCT-RND-2PC-FMBLK-8057Open Export Tool

Quick Actions

Post an RFQ

Product Description

This 2-piece round nesting coffee table set features a refined modern minimalist dual-tone aesthetic, defined by smooth rounded silhouettes and a balanced contrast between marble-look tabletops and matte black metal legs. Each table rests on four tapered conical splayed legs angled outward to create a wide, stable support base, with the smaller table sized to tuck fully beneath the larger one to cut occupied floor space when not in active use, or pull out as needed for expanded surface area.
The set uses durable, thoughtfully selected materials for long-term use: the larger tabletop is dark grey sintered stone with soft white linear veining and a polished finish, while the smaller tabletop is white sintered stone with subtle grey linear veining and matching polished finish. All legs are constructed from powder-coated matte black steel, secured to tabletops with zinc-plated steel mounting bolts and locking washers for rigid connection. Each leg ends in a non-slip TPE floor-protective leveling pad that rotates to compensate for slight unevenness in hard flooring, eliminating direct metal-to-floor contact to prevent scratch damage. The non-porous tabletop surface wipes clean easily with a damp cloth and requires no regular sealing to retain its finish.
Functionally, the set adapts seamlessly to changing use needs: when nested, it acts as a single streamlined coffee table, and when separated, it provides two independent surfaces for serving, display, or everyday item storage. The splayed leg design resists tipping during regular use, and the built-in cable management capacity supports organized routing of power and data cables when used near media or work setups.
This set suits a wide range of spaces, including residential living rooms positioned in front of sofas or sectionals to hold drinks, reading materials, and decor, compact apartments and studios where space-saving design is a priority, covered balconies as an accent surface for plants and refreshments, and office reception lounges or breakout areas to hold guest amenities and reading materials. It also works well for casual entertaining, as the separated tables create additional serving space for gatherings.
For procurement, note that each set ships in two cartons and requires assembly, with a reference assembly time per set that supports straightforward on-site setup. The lightweight total net weight allows for easy repositioning between spaces as layout needs change.

2-Piece Round Nesting Coffee Table Set, Faux Marble Top with Black Splayed Metal Legs Specifications

Suppliers and stock