Product supplierThree-Person Multifunctional Apartment Bunk Bed with Integrated Wardrobe, 60 x 60 x 1.2 mm special-shaped steel tubes with powder-coated grey finish
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 3970 × 2100 × 950 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Sleeping capacity | 3 occupants | |
|---|---|---|
| Bed board static-load reference | 150 kg per sleeping position | |
| Steel frame static-load reference | 450 kg total distributed load | |
| Ladder tread step-load reference | 120 kg per tread | |
| Guardrail horizontal-load reference | 80 kg lateral point load | |
| Wardrobe shelf reference load | 25 kg per shelf over a 600 mm span | |
| Bed board board count reference | 12 boards per sleeping position | |
| Recommended mattress thickness | 100 mm | |
| Warranty reference | 36 months framework and hardware warranty | |
| Bed Static Load Reference | 400 kg |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Main side columns | 60 x 60 x 1.2 mm special-shaped steel tubes with powder-coated grey finish | |
|---|---|---|
| Central columns | 60 x 60 x 1.2 mm square steel tubes forming the central load path | |
| Horizontal frame rails | 25 x 50 x 1.0 mm and 30 x 50 x 1.2 mm steel tubes connecting columns and bed ledges | |
| Bed support rails | Five 25 x 25 x 1.0 mm square tubes per sleeping position support the wooden bed boards | |
| Ladder structure | 25 x 25 x 1.2 mm square-tube uprights with 1.5 mm cold-rolled patterned anti-slip steel treads | |
| Guardrails | 25 x 25 x 1.0 mm steel-tube perimeter rails around the elevated sleeping areas | |
| Bed boards | Solid Chinese fir boards at 15 mm minimum thickness, planed smoothly on four sides | |
| Head and bed-end baffles | Injection-molded panels over melamine-faced MDF with seamless aging-resistant PP plastic edge sealing | |
| Wardrobe doors and structural panels | 16 mm joinery board or multi-layer board with light woodgrain decorative face | |
| Wardrobe back panel | 5 mm medium-density fiberboard fitted behind the storage compartments | |
| Fasteners and connecting hardware | Bolted steel brackets and visible screw fixings connect the ladder, frame, panels, and cabinet | |
| Surface finish | Grey coated metal frame paired with light woodgrain laminated panels |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Three-position sleeping layout | One elevated upper bed and one lower bed are combined with the integrated cabinet bay to serve three occupants | |
|---|---|---|
| Integrated wardrobe storage | Full-height cabinet provides multiple doors and compartmented storage beside the access ladder | |
| Vertical ladder access | Fixed inclined ladder with formed anti-slip steel treads connects floor level to the upper sleeping platform | |
| Upper-bed fall protection | Continuous tubular guardrails run along exposed upper-bed edges with open access only at the ladder entry | |
| Lower-bed side protection | Raised tubular side rails and solid baffle panels limit sideways mattress movement on the lower bed | |
| Ventilated bed support | Individual fir boards are laid across steel support rails to provide air circulation beneath the mattress | |
| Cabinet privacy and item separation | Multiple hinged doors divide the wardrobe into separate storage compartments for shared occupancy | |
| Bolted flat-pack assembly | Steel columns, rails, ladder, panels, and cabinet components are designed for on-site bolted assembly | |
| Floor-level stability frame | Vertical steel columns terminate in flat floor contact points and are tied by horizontal frame members | |
| Mattress retention | Raised bed ledges and end baffles contain the mattress within the steel perimeter | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Student dormitory rooms | Three sleeping positions and separate wardrobe space support high-density campus accommodation | |
|---|---|---|
| Staff and worker housing | Durable steel frame and replaceable wood panels suit long-term shared occupancy in company dormitories | |
| Backpacker and hostel rooms | The integrated ladder, guardrails, and compact footprint maximize sleeping capacity in limited room area | |
| Temporary accommodation projects | Flat-packed cartons and bolted assembly support batch deployment for modular housing sites | |
| Compact shared apartments | The wardrobe reduces separate furniture purchases and preserves floor space in small bedrooms | |
| School boarding facilities | Raised guardrails and anti-slip ladder treads provide structured access for supervised student environments | |
| Budget accommodation refurbishment | The neutral grey frame and light woodgrain panels coordinate with durable institutional interiors |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
