Product supplierThree-Person Multifunctional Combined Cabinet Student Apartment Bed JHY-011, 72 x 72 x 1.2 mm special C-section steel with light-gray protective coating
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 3970 × 900 × 2100 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Sleeping capacity | 3 occupants per unit, with two upper bunks and one lower bunk | |
|---|---|---|
| Steel frame static design reference | 300 kg per sleeping position | |
| Ladder step concentrated load reference | 120 kg per tread | |
| Cabinet desktop distributed load reference | 80 kg total working load | |
| Open shelf distributed load reference | 25 kg per shelf level | |
| Drawer load reference | 15 kg per drawer, 3 drawers supplied | |
| Bed-board distributed load reference | 150 kg per bunk platform | |
| Net weight reference | 185 kg complete assembled unit | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer steel uprights | 72 x 72 x 1.2 mm special C-section steel with light-gray protective coating | |
|---|---|---|
| Central steel uprights | 60 x 60 x 1.2 mm square steel tube forming the intermediate support frame | |
| Bed load rails | 30 x 90 x 1.2 mm special C-section steel supporting each sleeping platform | |
| Horizontal frame tubes | 25 x 50 x 1.0 mm and 25 x 25 x 1.0 mm square steel tubes for connected frame bracing | |
| Slat support rails | 20 x 50 x 1.0 mm square steel tube, 5 pieces per bunk under the wooden bed base | |
| Ladder construction | 25 x 25 x 1.2 mm square tube uprights with 1.5 mm cold-rolled patterned anti-slip steel treads | |
| Safety guardrails | 25 x 25 x 1.0 mm square steel tube around elevated sleeping areas | |
| Bed boards | Solid Chinese fir boards, minimum 15 mm thick and planed on four sides | |
| Head and foot panels | Injection-molded 800 x 300 mm panels on melamine-faced MDF substrate with anti-aging PP seamless edge banding | |
| Cabinet structural panels | 16 mm joinery board or multi-layer board with melamine-faced MDF door and desk surfaces | |
| Cabinet back panel | 5 mm medium-density fiberboard fitted behind the integrated storage unit | |
| Visible cabinet finish | Light oak-tone melamine surface with silver metal drawer pulls and open shelf divisions |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Three-position sleeping layout | Provides two raised sleeping platforms and one lower sleeping platform for three residents | |
|---|---|---|
| Integrated study workstation | Built-in long desktop below the left upper bunk supports writing, computer work and personal storage placement | |
| Three-drawer storage | Three horizontal drawers under the desktop provide separate small-item storage with metal handles | |
| Open bookcase storage | Multi-cell overhead shelves and vertical dividers organize books and personal items above the desk | |
| Under-desk storage bays | Open knee spaces and side panels create separated seating and storage zones for desk users | |
| Front vertical ladder | Welded-frame ladder with five anti-slip treads provides access to the upper sleeping platform | |
| Elevated-bed fall protection | Continuous steel guardrails enclose exposed upper-bunk edges with solid panel infill at ends | |
| Lower bunk shoe rack | Parallel steel tubes beneath the lower bed form a ventilated shoe and luggage shelf | |
| Panel edge protection | Head/foot panel edges use seamless anti-aging PP injection edge banding to reduce impact and moisture exposure | |
| Freestanding bolted assembly | Steel posts, cross rails, ladder and cabinet modules form a knockdown apartment-style assembly with floor-contact end caps | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Student dormitory room | Suitable for three-resident rooms where sleeping, study and storage must fit one wall | |
|---|---|---|
| Staff accommodation | Suitable for factory, hospital and institutional staff quarters requiring durable high-occupancy furniture | |
| Boarding school apartment | Fits supervised housing requiring separated beds, ladder access and individual desk storage | |
| University postgraduate housing | Suitable for compact multi-occupant apartments combining bedroom and workstation functions | |
| Temporary worker housing | Suitable for project-site and modular accommodation with standardized room layouts | |
| Budget hostel renovation | Can serve high-density resident rooms where durable metal construction and easy cleaning are priorities | |
| Small apartment shared bedroom | Appropriate where a wall-length integrated unit replaces separate beds, desks and bookcases |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
