Product supplierModern Luxury Console Table with Dark Stone Top and Champagne Bronze Faceted V Base, 12mm dark sintered stone with polished marbled finish, 8mm backing board
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1600 × 450 × 850 mm | |
|---|---|---|
| Tabletop thickness | 20 mm | |
| Drawer front height | 120 mm | |
| Drawer internal depth | 380 mm | |
| Base plinth dimensions | 800 x 300 x 20 mm | |
| Faceted support column width at base | 120 mm | |
| Apron height below tabletop | 130 mm | |
| Floor clearance under apron | 720 mm | |
| Rounded corner radius | 15 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Tabletop static load capacity | 50 kg | |
|---|---|---|
| Product net weight | 52 kg | |
| Tabletop surface scratch resistance | 4 grade | |
| Surface water and stain resistance | Grade A | |
| Recommended decor load per square meter | 35 kg | |
| Metal base anti-tip overturn moment | 220 N·m | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop surface | 12mm dark sintered stone with polished marbled finish, 8mm backing board | |
|---|---|---|
| Table apron and drawer fronts | 18mm high-density MDF with matte champagne bronze paint finish | |
| Drawer boxes | 15mm multi-layer plywood with matte lacquer internal finish | |
| Support base structure | 1.5mm thick brushed champagne bronze stainless steel, faceted welded V-form | |
| Floor plinth | 2mm thick rectangular bronze-finished metal with anti-slip floor pads | |
| Drawer slides | Full extension cold-rolled steel ball bearing slides, soft-close optional | |
| Tabletop edge trim | Matching bronze metal trim with polished chamfered edge | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Front storage drawers | Two equal-width centered drawers for small entry items, fully extendable | |
|---|---|---|
| Central base support | Single faceted V-form base with floor plinth for even weight distribution | |
| Anti-slip floor protection | Four non-marking rubber pads on plinth bottom to prevent floor scratching | |
| Display surface function | Flat narrow top for decorative objects, table lamps, and entryway essentials | |
| Drawer closure mechanism | Soft-close damping to prevent slamming and reduce impact noise | |
| Surface maintenance | Non-porous top finish allows wet cloth cleaning without sealing requirement | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential entryway/hallway | Narrow depth fits 450mm deep hall spaces for key and decor display | |
|---|---|---|
| Behind-sofa placement in living rooms | 850mm height aligns with standard sofa back height for surface access | |
| Luxury apartment and villa foyers | Sculptural bronze base and stone top match high-end contemporary interior styling | |
| Hotel corridor and lounge accent placement | Stable plinth base meets commercial light-traffic durability requirements | |
| Recommended use case | Display decorative art, table lamps, and store small entry accessories |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool