| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1200 x 400 x 850 mm | |
|---|---|---|
| Tabletop thickness | 20 mm | |
| Left vertical support panel dimensions | 830 x 350 x 100 mm | |
| Right U-frame leg profile | 50 x 20 mm rectangular metal tubing | |
| Right U-frame base width | 320 mm | |
| Tabletop corner radius | 30 mm | |
| Wall clearance requirement | 20 mm | |
| Under-table clearance height | 820 mm | |
| Under-table leg span | 650 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 80 kg | |
|---|---|---|
| Product net weight | 35 kg | |
| Metal frame joint static load | 100 kg | |
| Sintered stone surface abrasion resistance | Grade 4 | |
| Adjustable foot adjustment range | 10 mm | |
| Warranty period | 3 years | |
| Available color variant count | 6 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 12mm high-density fiberboard core | |
|---|---|---|
| Tabletop surface layer | 8mm glossy sintered stone with natural marble veining | |
| Left vertical support panel | Matte black MDF with vertical fluted grooved texture | |
| Left panel edge trim | 0.8mm PVD brushed gold stainless steel | |
| Right support frame | 1.5mm thick welded stainless steel with PVD brushed gold finish | |
| Leveling feet | Nylon plastic with non-slip rubber pad | |
| Surface finish protection | Scratch-resistant, waterproof nano-coating on sintered stone | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Placement design | Engineered to sit flush against entryway walls with minimal rear gap | |
|---|---|---|
| Leveling adjustment | Rotating nylon feet at base bottom compensate for uneven hard floors | |
| Surface utility | Waterproof, stain-resistant tabletop supports decorative displays and daily small items | |
| Assembly requirement | Knock-down flat-pack assembly requiring only included Allen key for setup | |
| No integrated storage | Open leg design provides no enclosed drawers or lower shelves for storage | |
| Load distribution | Dual asymmetric support design provides even weight distribution across full tabletop length | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential entryway/foyer | Sits flush against walls to display decorative items without obstructing walkways | |
|---|---|---|
| Living room sofa back placement | Acts as a narrow accent table behind sofas for lamps and decor | |
| Hotel corridor decorative use | Provides high-end visual accent for upscale public hallway spaces | |
| Open plan space divider | Defines zone edges between living and entry areas without blocking sightlines | |
| Luxury apartment end-of-hallway placement | Serves as a focal decorative table for narrow corridor terminus walls |
EU Market Access Requirements* EN Standards
| Furniture surface durability | EN 15185:2011 | |
|---|---|---|
| Furniture stability test | EN 1022:2018 |
Standards applicable to China-market projects
| Tabletop surface safety | GB/T 4897.3 | |
|---|---|---|
| Metal frame structural safety | GB/T 3324 | |
| Formaldehyde emission limit | GB 18584 |
This product must meet the following technical requirements: 1. Tabletop surface safety: GB/T 4897.3; 2. Metal frame structural safety: GB/T 3324; 3. Formaldehyde emission limit: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
