| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1200 x 600 x 750 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Vertical leg profile | 50 x 50 mm square steel | |
| Horizontal base foot length | 620 mm | |
| Caster diameter | 50 mm | |
| Modesty panel dimensions | 1100 x 350 x 15 mm | |
| Under-table knee clearance height | 690 mm | |
| Folded storage thickness | 190 mm | |
| Frame crossbar height | 380 mm above floor | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Net product weight | 24 kg | |
|---|---|---|
| Static tabletop load capacity | 120 kg | |
| Recommended maximum user count | 2 persons | |
| Flip mechanism cycle rating | 10000 cycles | |
| Caster dynamic load rating per unit | 40 kg | |
| Tabletop surface abrasion resistance | 2000 cycles | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop core | 18mm high-density particleboard substrate | |
|---|---|---|
| Tabletop surface | 0.6mm thick light oak woodgrain melamine laminate | |
| Tabletop edge banding | 2mm thick matching PVC edge | |
| Frame and base construction | 1.5mm thick cold-rolled steel tube with matte black powder coating | |
| Flipping mechanism components | 2.0mm thick stamped steel brackets with zinc-plated fasteners | |
| Locking mechanism | Glass-filled nylon flip lock lever | |
| Caster material | 50mm diameter black nylon twin-wheel casters | |
| Modesty panel | 15mm thick melamine-faced particleboard, matching tabletop finish | |
| Foot pads integrated with casters | TPU non-marking contact pads | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Flip-top operation | Spring-assisted pivot mechanism allows tabletop to rotate 90 degrees from horizontal working position to vertical storage position | |
|---|---|---|
| Mobility function | 4 swivel casters allow 360-degree movement on hard commercial flooring, 2 casters include manual brake locks to fix table position during use | |
| Nested storage capability | Tables nest closely together when folded to vertical position, reducing storage footprint by 70% compared to fixed tables | |
| Flip lock function | Positive locking latch engages automatically when tabletop is lowered to horizontal position, prevents unintended tilting during writing or equipment placement | |
| Seated privacy function | Full-height modesty panel blocks view of under-table area from front seating position, maintains privacy during training sessions | |
| No-tools height alignment | Pre-set fixed working height of 750mm matches standard office chair seat height, no adjustment required for standard seated use | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Number of shipping packages | 1 unit per carton | |
|---|---|---|
| Shipping carton dimensions | 1270 x 670 x 130 mm | |
| Gross shipping weight per unit | 28 kg | |
| Shipping volume per unit | 0.11 CBM | |
| assembly time per unit | 20 minutes | |
| 20ft GP container loading quantity | 240 units | |
| 40ft HQ container loading quantity | 590 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set |
Recommended spaces / users / usage modes
| Corporate training rooms | Suitable for multi-table layouts for employee training, as foldable design allows quick reconfiguration between lecture, group work, and fully stored layouts | |
|---|---|---|
| Conference and meeting spaces | Usable as temporary additional meeting seating for large events, as casters allow quick movement without lifting | |
| Educational classroom settings | Appropriate for college, vocational school, or adult education classrooms, as durable melamine surface resists pen marks, scratches, and frequent cleaning | |
| Co-working and flexible office spaces | Ideal for hot-desking or event spaces that require daily layout changes, as flip mechanism allows one-person operation to reconfigure rooms without additional staff | |
| Temporary event and seminar spaces | Suitable for rental venues and pop-up events, as lightweight construction and casters allow fast setup and breakdown, and folded profile enables easy transport between event locations |
EU Market Access Requirements* EN Standards
| EN 15372:2016 | Furniture - Strength, durability and safety for non-domestic tables, applicable for commercial training room use structural performance verification | |
|---|---|---|
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic tables, applicable as supplementary reference for stability testing | |
| EN 71-3:2019+A1:2021 | Safety of toys - Migration of certain elements, applicable if tables are used in educational settings with minor users |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.5 Desk and Table Products |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for tabletop panel strength, edge banding adhesion, and surface finish durability verification | |
|---|---|---|
| GB/T 3325-2017 | General technical requirements for metal furniture, applicable for steel frame welding quality, coating adhesion, and structural load capacity verification | |
| GB 18584-2001 | Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde emission testing of particleboard components | |
| GB/T 10357.1-2013 | Furniture mechanical performance test for tables, applicable for static load, durability, and stability testing of table structure |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for tabletop panel strength, edge banding adhesion, and surface finish durability verification; 2. GB/T 3325-2017: General technical requirements for metal furniture, applicable for steel frame welding quality, coating adhesion, and structural load capacity verification; 3. GB 18584-2001: Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde emission testing of particleboard components; 4. GB/T 10357.1-2013: Furniture mechanical performance test for tables, applicable for static load, durability, and stability testing of table structure; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
