Mobile Height-Adjustable Wedge-Shaped Tilting Laptop Table (model MBL-WEDGE-4C-760) is listed under Flip Top Training Table. Dimensions: 900 × 600 × 760 mm. Materials: 25 mm light gray laminated particleboard panel with sealed substrate and smooth wear-resistant surface. Load capacity: 30 kg uniformly distributed load on the horizontal work surface. Product Features: Mobile,workstation,folding,tilt-top,structure,laminated,panel,steel,tube,frame,caster,base. This page consolidates 5 groups of specifications and ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | ZHENGFA | Model | MBL-WEDGE-4C-760 |
| Overall dimensions (W × D × H) | 900 × 600 × 760 mm | Overall footprint | 900 x 600 x 760 mm |
| Primary Component Thickness | 40 mm according to load-bearing role | Hardware / Moving-part Clearance | 5 mm operating clearance |
| Static worktop load | 30 kg uniformly distributed load on the horizontal work surface | Tilted-position load | 15 kg maximum equipment load when the top is locked at an inclined angle |
| Rack load capacity | 5 kg uniformly distributed load on the under-top slatted rack | Caster load rating | 40 kg per caster dynamic rating, providing redundant four-point support |
| Height-adjustment durability | 2,000 height-setting cycles without loss of collar engagement | Tilt mechanism durability | 3,000 tilt-lock cycles using the indexed rotary knob |
| Stability criterion | No overturning when a 10 kg vertical load is applied 100 mm inside the front edge | Mobility resistance | Four casters roll over level carpet or hard flooring with a push force below 150 N under full 30 kg load |
| Reference Static Load | 150 kg depending on category | Moving-part Durability Reference | Acceptance target 50000 cycles |
| Worktop panel | 25 mm light gray laminated particleboard panel with sealed substrate and smooth wear-resistant surface | Worktop edge | 2 mm black PVC edge band bonded around the panel perimeter for impact and chip protection |
| Outer support legs | 50 mm light gray powder-coated welded steel tubes with splayed four-point base geometry | Inner height columns | 40 mm silver-gray steel telescoping tubes locked by indexed collar clamps |
| Tilt pivot assembly | 70 mm steel pivot shaft with glass-fiber-reinforced nylon locking hub and black rotary knob | Joint covers | Black injection-molded PP or ABS covers at leg braces, caster sockets, and pivot housings |
| Modesty panel | 18 mm light gray laminated particleboard panel fixed between the front support columns | Under-top rack | Black powder-coated steel slat rack with four transverse bars and side mounting plate |
| Caster wheels | Four twin-wheel nylon casters with polypropylene hubs, black thermoplastic rubber treads, and swivel forks | Caster brake components | Black steel or nylon brake tabs on each swivel fork for wheel locking |
| Fasteners | Zinc-plated steel bolts, washers, and threaded inserts at pivot, rack, and leg joints | Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints |
| Top tilt angle | 90 degrees from horizontal to near-vertical display position | Worktop tilt | Indexed knob locks the worktop from 0 degrees horizontal through 90 degrees near-vertical presentation angle |
| Tilt locking | Rotary knob engages positive detents and clamps both sides of the pivot hub, preventing unintended drift | Height adjustment | Manual telescoping columns set the work surface from 680 mm to 760 mm, published value 760 mm, using collar releases |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable | Reference Package Count | 1 set / 2 cartons |
| Reference Assembly Time | 40 minutes per set | Reference Packaging Volume | 0.8 m³/set |
| Reference Packaged Gross Weight | 120 kg/set | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 900 × 600 × 760 mm | |
|---|---|---|
| Overall footprint | 900 x 600 x 760 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Static worktop load | 30 kg uniformly distributed load on the horizontal work surface | |
|---|---|---|
| Tilted-position load | 15 kg maximum equipment load when the top is locked at an inclined angle | |
| Rack load capacity | 5 kg uniformly distributed load on the under-top slatted rack | |
| Caster load rating | 40 kg per caster dynamic rating, providing redundant four-point support | |
| Height-adjustment durability | 2,000 height-setting cycles without loss of collar engagement | |
| Tilt mechanism durability | 3,000 tilt-lock cycles using the indexed rotary knob | |
| Stability criterion | No overturning when a 10 kg vertical load is applied 100 mm inside the front edge | |
| Mobility resistance | Four casters roll over level carpet or hard flooring with a push force below 150 N under full 30 kg load | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Worktop panel | 25 mm light gray laminated particleboard panel with sealed substrate and smooth wear-resistant surface | |
|---|---|---|
| Worktop edge | 2 mm black PVC edge band bonded around the panel perimeter for impact and chip protection | |
| Outer support legs | 50 mm light gray powder-coated welded steel tubes with splayed four-point base geometry | |
| Inner height columns | 40 mm silver-gray steel telescoping tubes locked by indexed collar clamps | |
| Tilt pivot assembly | 70 mm steel pivot shaft with glass-fiber-reinforced nylon locking hub and black rotary knob | |
| Joint covers | Black injection-molded PP or ABS covers at leg braces, caster sockets, and pivot housings | |
| Modesty panel | 18 mm light gray laminated particleboard panel fixed between the front support columns | |
| Under-top rack | Black powder-coated steel slat rack with four transverse bars and side mounting plate | |
| Caster wheels | Four twin-wheel nylon casters with polypropylene hubs, black thermoplastic rubber treads, and swivel forks | |
| Caster brake components | Black steel or nylon brake tabs on each swivel fork for wheel locking | |
| Fasteners | Zinc-plated steel bolts, washers, and threaded inserts at pivot, rack, and leg joints | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Top tilt angle | 90 degrees from horizontal to near-vertical display position | |
|---|---|---|
| Worktop tilt | Indexed knob locks the worktop from 0 degrees horizontal through 90 degrees near-vertical presentation angle | |
| Tilt locking | Rotary knob engages positive detents and clamps both sides of the pivot hub, preventing unintended drift | |
| Height adjustment | Manual telescoping columns set the work surface from 680 mm to 760 mm, published value 760 mm, using collar releases | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
EU Market Access Requirements* EN Standards
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.5 Desk and Table Products |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp