Product supplierMobile Flip-Top Training Table with Walnut Laminate Top, 25 mm particleboard core, walnut wood-grain melamine or HPL face, sealed all edges.
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1200 × 500 × 750 mm | |
|---|---|---|
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 24 kg | |
|---|---|---|
| Recommended distributed top load | 60 kg | |
| Concentrated static load at center | 30 kg over 200 x 200 mm | |
| Modesty panel lateral load | 15 kg | |
| Caster individual rated load | 40 kg | |
| Flip-top mechanism cycle life | 10000 cycles | |
| Caster travel durability | 20 km over smooth indoor floors | |
| Brake holding force | 20 kg horizontal push | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Worktop substrate | 25 mm particleboard core, walnut wood-grain melamine or HPL face, sealed all edges. | |
|---|---|---|
| Worktop edge | 2 mm impact-resistant PVC edge band in matching walnut tone, machine-glued and radius-trimmed. | |
| Modesty panel | 18 mm particleboard panel with matching walnut laminate on exposed face and sealed back. | |
| Folding legs | 40 x 40 x 1.5 mm white powder-coated rectangular steel legs with welded foot sockets. | |
| Upper frame rails | 30 x 30 x 1.5 mm powder-coated steel rectangular tubes connecting both leg frames. | |
| Utility tray | 0.8 mm perforated steel sheet with gray powder-coated finish and round ventilation holes. | |
| Flip hinges | 2 mm formed steel hinge plates with zinc-plated pivot pins and polymer wear bushings. | |
| Latch and release lever | Black injection-molded PP lever acting on a steel spring-loaded side latch. | |
| Caster wheels | Four 50 mm nylon twin-wheel swivel casters with gray TPU tread and black hubs. | |
| Caster brakes | Two front casters with black PP total-lock pedals locking wheel and swivel. | |
| Fasteners | Zinc-plated steel M8 bolts, lock washers, and threaded welded inserts. | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Flip-top operation | Side lever releases the spring latch and rotates the 1200 mm top from 0 degree use position to 90 degree vertical nesting position. | |
|---|---|---|
| Folding lock positions | Dual positive locks engage at 0 degree horizontal use and 90 degree folded storage positions. | |
| Mobile repositioning | Four 360 degree swivel twin casters allow one-person movement; 2 braked casters lock the table in meeting layouts. | |
| Nesting storage | Folded units align in rows at 190 mm depth per table, reducing storage footprint when not in use. | |
| Modesty screening | 1040 x 340 mm panel screens seated users from the opposite side while retaining 600 mm lower leg clearance. | |
| Perforated utility storage | 900 x 130 mm steel tray holds notebooks, power adapters, or loose cables under the top. | |
| Surface reconfiguration | Tables join side by side to form 1200 mm module rows for training, exams, or conference layouts. | |
| Floor protection | Soft gray TPU caster tread rolls on vinyl, wood, tile, and low-pile carpet without exposed metal contact. | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
No data is available for this section.
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.5 |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool