Product supplierMobile Flip-Top Training Table with Casters, 25 mm particleboard or MDF substrate with light gray matte laminate face
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1200 × 500 × 740 mm | |
|---|---|---|
| Overall footprint | 1200 x 500 x 740 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 22 kg | |
|---|---|---|
| Distributed work-surface load | 80 kg | |
| Concentrated static load | 40 kg over 200 x 200 mm | |
| Mobile rolling load | 60 kg | |
| Recommended users | 1 person | |
| Caster load capacity | 40 kg per caster | |
| Top tilt cycle target | 10,000 cycles | |
| Caster rolling durability | 20,000 cycles | |
| Warranty period | 5 years | |
| Available color count | 2 colorways |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Work surface board | 25 mm particleboard or MDF substrate with light gray matte laminate face | |
|---|---|---|
| Surface finish | Low-glare light gray melamine or HPL decorative face with smooth wipe-clean surface | |
| Edge protection | 2 mm black PVC edge band with rounded profile and impact-resistant corners | |
| Support columns | 60 mm black powder-coated round steel tubes with 1.8 mm wall thickness | |
| Underside beam | 80 x 40 mm powder-coated steel crossbeam with 2.0 mm wall thickness | |
| Flip hinge assembly | Steel pivot bracket, black glass-filled nylon housing and silver release dial at left beam end | |
| Feet and yokes | Silver-gray die-cast aluminum or powder-coated cast aluminum two-prong bases | |
| Caster wheels | 50 mm gray nylon twin wheels with black thermoplastic rubber tread and swivel bearing | |
| Caster brakes | Four manual lever brakes engaging the wheel assembly to prevent unintended movement | |
| Leveling and mounting sockets | Glass-filled nylon caster sockets with metal pivot sleeves at each foot end | |
| Fasteners | Zinc-plated steel M8 bolts, lock washers and threaded inserts for leg and beam assembly | |
| Surface treatment | Epoxy-polyester powder coating on steel parts with 60 um dry film thickness |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Flip-top operation | Side-mounted rotary release unlocks the top for vertical nesting and returns it to 0 degree working position | |
|---|---|---|
| Fold lock positions | Two-position lock at 0 degree work mode and 90 degree nest mode with positive spring-loaded engagement | |
| Nesting configuration | Folded tables align in rows with 180 mm longitudinal nesting pitch when pushed together | |
| Mobility system | Four 360 degree swivel twin-wheel casters allow lateral repositioning and row formation by one user | |
| Brake function | Four individual lever locks hold the table during writing or meeting use on level floors | |
| Cable management | One black under-top cable clip located on the front beam for a power or data cable | |
| Seated access | Central open knee bay provides 760 mm width and 665 mm height without drawers or modesty obstruction | |
| Edge safety | Rounded 15 mm corners and 2 mm black bumper edge reduce impact injury during room turnover | |
| Knockdown assembly | Legs, beam, top and casters assemble with 12 threaded fasteners for flat-pack delivery | |
| Floor compatibility | Soft tread casters suit vinyl, carpet tile, laminate and sealed wood commercial floors | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Corporate training room | Single-person table supports laptop-based training and can be nested quickly between class changes | |
|---|---|---|
| Flexible meeting area | Braked mobile bases allow straight rows, small clusters or U-shaped layouts without tools | |
| Co-working space | Compact 1200 x 500 mm footprint suits hot-desking and temporary project work in dense offices | |
| Education and examination setting | Wipe-clean light gray top and open knee space provide an individual writing and tablet surface | |
| Temporary event registration | Four swivel casters allow staff to move the table for reception, polling or registration points | |
| Storage-limited facilities | Vertical fold and nesting configuration reduce floor area when rooms require multi-purpose turnover | |
| Government or enterprise conference floor | Neutral gray and black appearance coordinates with standard office seating and modular room schemes |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 527-1:2011 | Office worktables and desks, safety, strength and durability requirements applicable to the fixed-height work surface | |
|---|---|---|
| EN 527-2:2014+A1:2019 | Office worktables mechanical safety requirements, including stability and structural test acceptance | |
| EN 1728:2014 | Seating and table test methods for strength, durability and stability, useful as frame-loading test reference | |
| EN 12521:2015 | Furniture strength, durability and safety requirements for non-domestic tables | |
| EN 16139:2013+AC:2013 | Non-domestic seating strength requirements can guide heavy-use caster and frame procurement, not table certification |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.5 |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to laminate board quality, edge bonding and dimensional inspection | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture general technical requirements, applicable to steel-tube strength, coating and welded or assembled frame parts | |
| GB/T 10357.7-2013 | Table stability test method, applicable to overturning checks with the table in horizontal use position | |
| GB 18584-2001 | Indoor decorative materials limited harmful substances in wooden furniture, applicable to board and edge-bonding emissions | |
| GB/T 28202-2020 | Furniture hardware quality requirements, applicable to hinges, locks and connecting fasteners |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to laminate board quality, edge bonding and dimensional inspection; 2. GB/T 3325-2017: Metal furniture general technical requirements, applicable to steel-tube strength, coating and welded or assembled frame parts; 3. GB/T 10357.7-2013: Table stability test method, applicable to overturning checks with the table in horizontal use position; 4. GB 18584-2001: Indoor decorative materials limited harmful substances in wooden furniture, applicable to board and edge-bonding emissions; 5. GB/T 28202-2020: Furniture hardware quality requirements, applicable to hinges, locks and connecting fasteners; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool