High-Back Beige Upholstered Executive Office Chair with Wood Trim and Chrome Swivel Base (model EXEC-WB-BG-001) is listed under Genuine Leather Chair, with overall dimensions of 820 × 860 × 1220 mm and main material of Top-grain Cowhide. Load capacity: 1136 kg. Certifications: High-back,design,360-degree,swivel,rolling,caster,base,wood,frame,padded,armrests. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 820 x 860 x 1220 mm | |
|---|---|---|
| Seat width | 660 mm | |
| Seat depth | 530 mm | |
| Maximum seat height (gas lift extended) | 550 mm | |
| Minimum seat height (gas lift lowered) | 440 mm | |
| Backrest height | 740 mm | |
| Backrest width | 580 mm | |
| Armrest height above seat | 230 mm | |
| Armrest length | 360 mm | |
| Five-star base diameter | 700 mm | |
| Caster diameter | 60 mm | |
| Seat cushion thickness | 120 mm | |
| Backrest segment height per section | 230 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight capacity | 150 kg | |
|---|---|---|
| Five-star base static load rating | 1136 kg | |
| Gas lift durability cycles | 100000 cycles | |
| Caster rolling durability | 40000 cycles | |
| Net product weight | 45 kg | |
| Backrest recline angle | 18 degrees | |
| Foam density (seat and back) | 45 kg/m³ | |
| Foam rebound rate | 60% | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat and back upholstery | 1.2mm thick beige PU/top-grain leather, wear-resistant spot-clean finish | |
|---|---|---|
| Internal frame | 18mm thick birch plywood reinforced with solid hardwood crossbars, dried to 9% moisture | |
| Armrest and back trim | Solid walnut-stained hardwood frame with polished scratch-resistant lacquer finish | |
| Padding | High-density molded polyurethane foam, CFC-free, with 10mm soft foam top layer | |
| Five-star base | 2mm thick polished chrome-plated steel, corrosion-resistant finish | |
| Casters | Black PU dual-wheel casters, suitable for carpet and hard floor surfaces |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Swivel function | 360-degree full rotation for multi-directional desk access | |
|---|---|---|
| Height adjustment | Pneumatic gas lift adjustment via under-seat lever, 110mm travel | |
| Tilt function | Center-tilt recline with adjustable tension and infinite position lock | |
| Mobility | Smooth-rolling dual-wheel casters for easy repositioning on office floors |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive private office | Formal wood-trim design matches traditional executive desk suites for manager/director use | |
|---|---|---|
| Boardroom seating | Formal upholstered profile suitable for primary boardroom chair positions |
EU Market Access Requirements* EN Standards
| EN 1335-1:2020 | Applies to office work chair dimensional safety and performance requirements | |
|---|---|---|
| EN 1335-2:2018 | Applies to office chair structural strength and durability test requirements | |
| EN 1022:2018 | Applies to seating stability testing for all domestic and office chairs |
US and Canada office-furniture standards
| ANSI/BIFMA X5.1-2017 | Applies to general-purpose office chair safety and performance standard | |
|---|---|---|
| ANSI/BIFMA X5.11-2015 | Applies to heavy-duty office chair load rating requirements up to 159kg |
Standards applicable to China-market projects
| GB/T 3326-2016 | Applies to office furniture chair dimensional stability and strength requirements | |
|---|---|---|
| GB/T 10357.3-2013 | Applies to office chair mechanical performance test methods for back and seat | |
| GB 18584-2001 | Applies to limit of harmful substances in wooden furniture for indoor use |
This product must meet the following technical requirements: 1. GB/T 3326-2016: Applies to office furniture chair dimensional stability and strength requirements; 2. GB/T 10357.3-2013: Applies to office chair mechanical performance test methods for back and seat; 3. GB 18584-2001: Applies to limit of harmful substances in wooden furniture for indoor use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp