1+1+2 Configuration Brown Faux Leather Executive Office Reception Sofa Set with Red Wood Trim (model OFS-112-BRW-REDTRIM) is listed under Genuine Leather Sofa. Dimensions: 1620 × 900 × 890 mm. Materials: 1.2 mm thick brown PU faux leather, stain and water resistant treated. Load capacity: 150 kg. Product Features: classic,executive,style,fixed,non-reclining,structure,upholstered,seating,wood,frame,construction. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | Fanshidun | Model | OFS-112-BRW-REDTRIM |
| Overall dimensions (W × D × H) | 1620 × 900 × 890 mm | Overall set layout | 3 pieces: two single armchairs, one 2-seat loveseat arranged in conversational grouping |
| Seat height from floor | 450 mm | Seat depth (usable surface) | 580 mm |
| Backrest height above seat | 440 mm | Armrest height above seat | 180 mm |
| Arm width (padded surface) | 120 mm | Seat cushion thickness | 120 mm |
| Minimum floor space required for full set | 3200 x 2800 mm | Back Cushion Thickness | 160 mm |
| Leg Height / Floor Clearance | 160 mm | Single armchair net weight | 35 kg |
| Per-seat static load capacity | 150 kg | Seat foam density | 40 kg/m³ |
| Foam rebound rate | 60% | PU upholstery abrasion resistance | 50000 Martindale cycles |
| Seam stitch pitch | 30 mm | Standard commercial warranty | 3 years |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm |
| Per-seat Load Reference | 130 kg/seat | Seat and back upholstery | 1.2 mm thick brown PU faux leather, stain and water resistant treated |
| Quilted side back accents | Matching PU with diamond quilted stitching for decorative detail | Structural inner frame | Kiln-dried solid hardwood with multi-layer plywood reinforcement, insect treated |
| Seat support system | 3.8 mm diameter serpentine steel springs with elastic webbing support net | Cushion core material | High-density polyurethane foam wrapped in soft polyester batting |
| Armrest padding | 20 mm thick high-density foam under PU upholstery for padded comfort | Exterior trim and feet | Glossy red-stained solid wood with polished clear lacquer finish |
| Fastening hardware | Zinc-plated steel bolts and connecting brackets for KD assembly | Back panel structure | Hardboard back panel covered in matching PU upholstery |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg | Seating configuration | 4 total seats across 3 pieces arranged for face-to-face visitor conversation |
| Recline function | Fixed non-reclining upright backrest angle of 105 degrees for formal waiting posture | Mobility | Fixed stationary position with solid wood block feet, no casters or glide adjustment |
| Assembly requirement | Knockdown assembly requiring attachment of wood trim, feet and back panels using included hardware | Surface maintenance | Wipe-clean PU surface resistant to common office stains, spills and light abrasion |
| Armrest function | Fully padded integrated armrests supporting forearms during seated waiting periods | Set flexibility | Individual pieces can be repositioned separately to adapt to different lobby layouts |
| Block foot height | 50 mm | Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
| Reference Package Count | 1 set / 2 cartons | Reference Assembly Time | 40 minutes per set |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | Reference Packaging Volume | 1.8 m³/item |
| Reference Packaged Gross Weight | 110 kg/item | Executive office reception areas | Formal styling suitable for greeting corporate visitors and clients outside private offices |
| Company lobby waiting spaces | Durable high-capacity seating for short-term visitor waiting during business hours | Managerial office meeting nooks | Small conversational seating group for casual 4-person discussions in private offices |
| Government and institutional visitor areas | Formal durable design meets requirements for public institutional waiting spaces | Recommended pairing | Place with coordinating wood-finish coffee table on low-pile commercial area rug |
| Positioning guidance | Arrange units facing inward with 450 mm clearance between seats for easy guest access | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1620 × 900 × 890 mm | |
|---|---|---|
| Overall set layout | 3 pieces: two single armchairs, one 2-seat loveseat arranged in conversational grouping | |
| Seat height from floor | 450 mm | |
| Seat depth (usable surface) | 580 mm | |
| Backrest height above seat | 440 mm | |
| Armrest height above seat | 180 mm | |
| Arm width (padded surface) | 120 mm | |
| Seat cushion thickness | 120 mm | |
| Minimum floor space required for full set | 3200 x 2800 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Single armchair net weight | 35 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Seat foam density | 40 kg/m³ | |
| Foam rebound rate | 60% | |
| PU upholstery abrasion resistance | 50000 Martindale cycles | |
| Seam stitch pitch | 30 mm | |
| Standard commercial warranty | 3 years | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat and back upholstery | 1.2 mm thick brown PU faux leather, stain and water resistant treated | |
|---|---|---|
| Quilted side back accents | Matching PU with diamond quilted stitching for decorative detail | |
| Structural inner frame | Kiln-dried solid hardwood with multi-layer plywood reinforcement, insect treated | |
| Seat support system | 3.8 mm diameter serpentine steel springs with elastic webbing support net | |
| Cushion core material | High-density polyurethane foam wrapped in soft polyester batting | |
| Armrest padding | 20 mm thick high-density foam under PU upholstery for padded comfort | |
| Exterior trim and feet | Glossy red-stained solid wood with polished clear lacquer finish | |
| Fastening hardware | Zinc-plated steel bolts and connecting brackets for KD assembly | |
| Back panel structure | Hardboard back panel covered in matching PU upholstery | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating configuration | 4 total seats across 3 pieces arranged for face-to-face visitor conversation | |
|---|---|---|
| Recline function | Fixed non-reclining upright backrest angle of 105 degrees for formal waiting posture | |
| Mobility | Fixed stationary position with solid wood block feet, no casters or glide adjustment | |
| Assembly requirement | Knockdown assembly requiring attachment of wood trim, feet and back panels using included hardware | |
| Surface maintenance | Wipe-clean PU surface resistant to common office stains, spills and light abrasion | |
| Armrest function | Fully padded integrated armrests supporting forearms during seated waiting periods | |
| Set flexibility | Individual pieces can be repositioned separately to adapt to different lobby layouts | |
| Block foot height | 50 mm | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office reception areas | Formal styling suitable for greeting corporate visitors and clients outside private offices | |
|---|---|---|
| Company lobby waiting spaces | Durable high-capacity seating for short-term visitor waiting during business hours | |
| Managerial office meeting nooks | Small conversational seating group for casual 4-person discussions in private offices | |
| Government and institutional visitor areas | Formal durable design meets requirements for public institutional waiting spaces | |
| Recommended pairing | Place with coordinating wood-finish coffee table on low-pile commercial area rug | |
| Positioning guidance | Arrange units facing inward with 450 mm clearance between seats for easy guest access |
EU Market Access Requirements* EN Standards
| EN 1335-1:2020 | Office furniture seating safety requirements, applicable to visitor reception seating | |
|---|---|---|
| EN 1021-1:2014 | Furniture upholstery flammability resistance to smouldering cigarette, recommended for public spaces | |
| EN 12520:2015 | Furniture strength, durability and safety for domestic and contract seating |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2021 | Lounge and public seating standard covering load, durability and stability for reception use | |
|---|---|---|
| ANSI/BIFMA e3-2019 | Furniture sustainability standard applicable to material emissions and ergonomic performance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to solid wood frame and trim components | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture, required for indoor office use | |
| GB/T 19001-2016 | Quality management system requirement, applicable to commercial furniture manufacturing supply |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood frame and trim components; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture, required for indoor office use; 3. GB/T 19001-2016: Quality management system requirement, applicable to commercial furniture manufacturing supply; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp