| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1520 x 780 x 360 mm | |
|---|---|---|
| Tabletop thickness | 80 mm | |
| Plinth base height | 280 mm | |
| Edge profile thickness | 80 mm | |
| Surface usable area | 1440 x 700 mm | |
| Corner radius | 5 mm | |
| Floor clearance under base | 0 mm | |
| Tabletop overhang | 0 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight | 350 kg | |
|---|---|---|
| Distributed static tabletop load | 100 kg | |
| Surface impact resistance | 0.6 J | |
| Recommended maximum user weight for edge sitting | 100 kg | |
| Seating capacity served | 4 | |
| Surface scratch hardness (Mohs) | 3 | |
| Weight distribution footprint | 1520 x 780 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop and plinth body | Solid natural dark grey veined marble, high-gloss polished finish | |
|---|---|---|
| Surface sealant | Penetrating stone sealer applied at factory | |
| Bottom contact pads | 5mm thick felt anti-scratch floor glides | |
| Stone finish coat | 2-component matte/satin polyurethane topcoat | |
| Adhesive joints (if assembled) | Epoxy stone adhesive for invisible seam bonding | |
| Reinforcement (if applicable) | Fiberglass mesh backing on underside of marble slab | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Surface function | Flat level surface for holding refreshments, decor, and service trays for lounge users | |
|---|---|---|
| Mobility | No casters, fixed position installation | |
| Storage function | No internal drawers, shelves, or concealed compartments | |
| Adjustability | No height adjustment, level feet optional for uneven floors | |
| Surface maintenance | Non-porous sealed surface wipes clean with soft damp cloth | |
| Assembly requirement | Fully assembled one-piece unit, no on-site assembly needed | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Executive office reception lounge | Suited for placement between sofa and armchairs for guest beverage service | |
|---|---|---|
| High-end residential living room | Luxury minimalist focal point for modern home seating arrangements | |
| Hotel VIP lounge area | Durable premium surface for waiting area guest use | |
| Boardroom casual breakout zone | Serves as central surface for informal meeting refreshments | |
| Designer showroom display | Showcase piece for contemporary luxury furniture collections |
EU Market Access Requirements* EN Standards
| EN 12372-2006 | Applicable for flexural strength testing of natural stone for furniture use | |
|---|---|---|
| EN 14231-2003 | Applicable for slip resistance testing of polished horizontal stone surfaces | |
| EN 1341-2012 | Applicable for dimensional tolerance requirements for natural stone slabs |
Standards applicable to China-market projects
| GB/T 19766-2016 | Applicable for natural marble building material dimensional and appearance quality checks | |
|---|---|---|
| GB 6566-2010 | Applicable for radionuclide limit testing for indoor decorative stone products | |
| GB/T 32835-2016 | Applicable for test methods of mechanical properties for natural stone used in furniture |
This product must meet the following technical requirements: 1. GB/T 19766-2016: Applicable for natural marble building material dimensional and appearance quality checks; 2. GB 6566-2010: Applicable for radionuclide limit testing for indoor decorative stone products; 3. GB/T 32835-2016: Applicable for test methods of mechanical properties for natural stone used in furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
