1+2 Configuration Executive Office Reception Sofa Set with Matching Coffee Table, Black Faux Leather with Solid Wood Trim (model OFS-REC-121-WD01) is listed under Genuine Leather Sofa. Dimensions: 2800 × 1580 × 900 mm. Materials: Kiln-dried solid hardwood frame with mortise and tenon reinforced joints. Load capacity: 150 kg. Product Features: Formal,commercial,design,Fixed,reception,seating,structure,Black,leather-look,upholstery,Polished,wood. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | Fanshidun | Model | OFS-REC-121-WD01 |
| Overall dimensions (W × D × H) | 2800 × 1580 × 900 mm | Overall set footprint (arranged for reception) | 2800 x 1580 x 900 mm |
| Single armchair dimensions | 1140 x 880 x 900 mm | Two-seat central sofa dimensions | 1580 x 880 x 900 mm |
| Seat height from floor | 450 mm | Seat depth (usable cushion depth) | 580 mm |
| Backrest height (seat surface to top of back) | 480 mm | Armrest width (solid wood top surface) | 120 mm |
| Coffee table dimensions | 1500 x 800 x 460 mm | Clearance under coffee table (apron to floor) | 180 mm |
| Seat Cushion Thickness | 180 mm | Back Cushion Thickness | 160 mm |
| Leg Height / Floor Clearance | 160 mm | Total set gross weight | 260 kg |
| Per-seat static load capacity | 150 kg | Seat foam density | 45 kg/m³ |
| Foam rebound rate | 60% | Upholstery abrasion resistance | 50000 cycles |
| Recommended maximum simultaneous users | 4 | Seat Foam Density / Rebound | 40 kg/m³ / 60% |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | Per-seat Load Reference | 130 kg/seat |
| Upholstery Seam Pitch | 4 mm | Seating frame | Kiln-dried solid hardwood frame with mortise and tenon reinforced joints |
| Upholstery | 0.8mm thick black PVC faux leather (Xi Pi) with scratch-resistant, stain-proof finish | Seat cushion filling | Three-layer high-resilience foam, top soft layer, middle buffer layer, bottom support layer |
| Backrest filling | 45kg/m³ high-density polyurethane foam with integrated lumbar support pad | Armrests and trim | Polished solid wood with multi-layer clear lacquer finish, reddish-brown wood tone |
| Support feet | Solid hardwood block feet with floor-protecting rubber pads | Coffee table frame and top | Solid wood frame with polished veneer wood tabletop, lower wood apron support |
| Seam stitching | High-strength polyester thread with 8mm stitch pitch for durable upholstery seams | Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg |
| Reference Upholstery Color Count | Recommended 8fabric/leather color options | Seating structure | Fixed-position non-reclining reception seating, designed for upright formal guest posture |
| Surface maintenance | Stain and water resistant upholstery, wipe-clean with damp cloth for daily office upkeep | Armrest support | Wide solid wood armrests provide stable forearm support for seated guests |
| Coffee table function | Level stable tabletop holds tea sets, ashtrays, and reception materials for guest use | Floor protection | Rubber pads on all feet prevent scratching hard office flooring |
| Assembly requirement | Pre-assembled seating units, only coffee table leg attachment required on site | Block foot height (sofa/armchair) | 80 mm |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods | Reference Package Count | 1 set / 2 cartons |
| Reference Assembly Time | 40 minutes per set | Reference Module Carton Dimensions | 2200× 1050× 850 mm |
| Reference Packaging Volume | 1.8 m³/item | Reference Packaged Gross Weight | 110 kg/item |
| Executive office reception area | Formal symmetric layout suitable for greeting business guests in senior leadership offices | Corporate lobby waiting zone | Durable commercial construction supports high-traffic daily visitor use |
| Government/official meeting room | Conservative dark wood and black leather design aligns with formal official meeting spaces | VIP lounge and guest house | High-back comfortable seating provides relaxed waiting space for distinguished visitors |
| Recommended configuration | Pair with short-pile commercial carpet and side end tables for complete reception setup | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2800 × 1580 × 900 mm | |
|---|---|---|
| Overall set footprint (arranged for reception) | 2800 x 1580 x 900 mm | |
| Single armchair dimensions | 1140 x 880 x 900 mm | |
| Two-seat central sofa dimensions | 1580 x 880 x 900 mm | |
| Seat height from floor | 450 mm | |
| Seat depth (usable cushion depth) | 580 mm | |
| Backrest height (seat surface to top of back) | 480 mm | |
| Armrest width (solid wood top surface) | 120 mm | |
| Coffee table dimensions | 1500 x 800 x 460 mm | |
| Clearance under coffee table (apron to floor) | 180 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total set gross weight | 260 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Seat foam density | 45 kg/m³ | |
| Foam rebound rate | 60% | |
| Upholstery abrasion resistance | 50000 cycles | |
| Recommended maximum simultaneous users | 4 | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat | |
| Upholstery Seam Pitch | 4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seating frame | Kiln-dried solid hardwood frame with mortise and tenon reinforced joints | |
|---|---|---|
| Upholstery | 0.8mm thick black PVC faux leather (Xi Pi) with scratch-resistant, stain-proof finish | |
| Seat cushion filling | Three-layer high-resilience foam, top soft layer, middle buffer layer, bottom support layer | |
| Backrest filling | 45kg/m³ high-density polyurethane foam with integrated lumbar support pad | |
| Armrests and trim | Polished solid wood with multi-layer clear lacquer finish, reddish-brown wood tone | |
| Support feet | Solid hardwood block feet with floor-protecting rubber pads | |
| Coffee table frame and top | Solid wood frame with polished veneer wood tabletop, lower wood apron support | |
| Seam stitching | High-strength polyester thread with 8mm stitch pitch for durable upholstery seams | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg | |
| Reference Upholstery Color Count | Recommended 8fabric/leather color options |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating structure | Fixed-position non-reclining reception seating, designed for upright formal guest posture | |
|---|---|---|
| Surface maintenance | Stain and water resistant upholstery, wipe-clean with damp cloth for daily office upkeep | |
| Armrest support | Wide solid wood armrests provide stable forearm support for seated guests | |
| Coffee table function | Level stable tabletop holds tea sets, ashtrays, and reception materials for guest use | |
| Floor protection | Rubber pads on all feet prevent scratching hard office flooring | |
| Assembly requirement | Pre-assembled seating units, only coffee table leg attachment required on site | |
| Block foot height (sofa/armchair) | 80 mm | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office reception area | Formal symmetric layout suitable for greeting business guests in senior leadership offices | |
|---|---|---|
| Corporate lobby waiting zone | Durable commercial construction supports high-traffic daily visitor use | |
| Government/official meeting room | Conservative dark wood and black leather design aligns with formal official meeting spaces | |
| VIP lounge and guest house | High-back comfortable seating provides relaxed waiting space for distinguished visitors | |
| Recommended configuration | Pair with short-pile commercial carpet and side end tables for complete reception setup |
EU Market Access Requirements* EN Standards
| EN 13759:2009 | Domestic and contract furniture - Seating - Test methods for strength and durability | |
|---|---|---|
| EN 1022:2005 | Domestic furniture - Seating - Determination of stability | |
| EN 15372:2016 | Furniture - Strength, durability and safety - Requirements for non-domestic tables |
US and Canada office-furniture standards
| ANSI/BIFMA X5.1-2017 | General purpose office chairs - Safety and performance reference, applied to lounge seating | |
|---|---|---|
| ANSI/BIFMA X5.4-2020 | Lounge and public seating - Performance requirements for commercial reception use | |
| ANSI/BIFMA X5.5-2021 | Desk products - Performance requirements applicable to matching wood coffee table |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to solid wood frame and coffee table | |
|---|---|---|
| GB/T 16799-2008 | Requirements for polyurethane artificial leather used in furniture upholstery | |
| GB 18584-2001 | Limit of harmful substances in wooden furniture for indoor use | |
| GB/T 19001-2016 | Quality management system reference for production and inspection |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood frame and coffee table; 2. GB/T 16799-2008: Requirements for polyurethane artificial leather used in furniture upholstery; 3. GB 18584-2001: Limit of harmful substances in wooden furniture for indoor use; 4. GB/T 19001-2016: Quality management system reference for production and inspection; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp