| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1220 x 680 x 450 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Lower shelf clearance above floor | 120 mm | |
| Vertical gap between tabletop and lower shelf | 220 mm | |
| Leg cross-section | 50 x 50 mm | |
| Leg wall thickness (solid wood) | 50 mm | |
| Lower shelf thickness | 18 mm | |
| Overhang of tabletop past leg frame | 40 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Tabletop distributed static load capacity | 113 kg | |
|---|---|---|
| Net product weight | 25 kg | |
| Recommended maximum number of users served | 5 | |
| Surface finish abrasion resistance | 400 cycles | |
| Finish moisture resistance rating | Level 2 for general lounge use | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | Solid hardwood with matte brown stain finish | |
|---|---|---|
| Legs | Solid tapered hardwood with matching brown finish | |
| Lower storage shelf | Solid hardwood panel, fixed between leg supports | |
| Structural connectors | Zinc-plated steel wood screws and cross dowels | |
| Surface finish | Clear matte polyurethane sealer | |
| Edge treatment | Rounded 3mm eased edge on tabletop and shelf | |
| Frame stretchers | Solid wood cross rails connecting legs at shelf level | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Tabletop surface function | Flat fixed surface for drink service, decor and light reading material | |
|---|---|---|
| Lower storage function | Open full-width shelf for magazines, remotes or decorative items | |
| Assembly requirement | Knockdown assembly with leg and shelf attachment to top | |
| Floor protection | Plastic glides fitted to bottom of each leg | |
| Structural rigidity | Fixed mortise and reinforced screw joint construction | |
| Surface maintenance | Wipe-clean sealed surface compatible with standard wood cleaners | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Office executive lounge placement | Positioned in front of leather sofa seating groups for guest reception | |
|---|---|---|
| Living room residential use | Centered between sofas and armchairs for casual family and guest use | |
| Reception area waiting zone | Used as center table in corporate waiting areas with lounge seating | |
| Hotel suite lounge area | Placed in guest room seating nooks for drink service and reading material | |
| Recommended pairing configuration | Matched with 3-seat sofa and two single armchairs as full lounge set |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables, applicable for load and stability verification | |
|---|---|---|
| EN 13722:2004 | Furniture – Test methods for surface finishes, applicable for abrasion and moisture resistance validation |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional stability and structural safety checks | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable for formaldehyde emission testing for indoor use |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional stability and structural safety checks; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable for formaldehyde emission testing for indoor use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
