| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall 3-seat sofa dimensions | 2050 x 850 x 880 mm | |
|---|---|---|
| Single armchair dimensions per unit | 920 x 820 x 880 mm | |
| Seat height from floor | 420 mm | |
| Seat depth (usable surface) | 580 mm | |
| Backrest total height | 460 mm | |
| Armrest height from seat surface | 200 mm | |
| Wooden arm cap width | 120 mm | |
| Center coffee table dimensions | 1200 x 600 x 450 mm | |
| Side end table dimensions | 600 x 600 x 500 mm | |
| Support leg height for sofas | 120 mm | |
| Coffee table lower shelf clearance | 220 mm | |
| Seat cushion thickness | 120 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Set total weight (all pieces) | 185 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Recommended maximum occupancy | 5 persons | |
| Foam density for seat cushions | 40 kg/m³ | |
| Foam density for back cushions | 30 kg/m³ | |
| Seam stitch tensile strength | 80 N | |
| Upholstery abrasion resistance | 50000 cycles | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat |
Core acceptance fields · Panels / hardware / frame / upholstery
| Upholstery material | Black 1.0mm thick matte faux leather (PU leather) | |
|---|---|---|
| Wood trim components | Polished solid hardwood with cherry red-brown lacquer finish | |
| Internal seating frame | 30mm thick engineered hardwood and plywood frame | |
| Seat cushion core | High-resilience polyurethane foam with 10mm soft foam top layer | |
| Back cushion core | Medium-density polyurethane foam | |
| Table top material | 18mm thick medium-density fiberboard (MDF) with cherry wood veneer finish | |
| Sofa support legs | Turned solid hardwood legs with polished lacquer finish | |
| Lower coffee table shelf | 15mm thick MDF with matching cherry wood veneer | |
| Upholstery stitching | Nylon-bonded thread with 8mm stitch pitch | |
| Floor protection pads | 5mm thick non-marking rubber pads | |
| Seat support system | 80mm wide sinuous steel springs with 50mm spacing | |
| Table frame joinery | Dowel and hardware-reinforced solid wood frame for tables |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Fixed modular arrangement: 1 three-seat sofa + 2 single armchairs + 1 center coffee table + 1 side end table | |
|---|---|---|
| Cushion design | Fixed attached seat and back cushions | |
| Coffee table storage | Open fixed lower shelf for magazine and small item storage | |
| Backrest support | Segmented triple-panel backrest with lumbar support zone | |
| Surface maintenance | Stain-resistant wipe-clean upholstery and wood finishes | |
| Stability design | Four-point wide leg placement for all seating and table pieces | |
| Armrest function | Wide flat wood arm caps for temporary placement of small items | |
| Seat suspension response | Sinuous spring suspension with 20% compression deflection under rated load | |
| Cushion Service Configuration | Recommended 2 removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Total shipping cartons | 7 cartons | |
|---|---|---|
| Largest carton dimensions (3-seat sofa) | 2100 x 900 x 650 mm | |
| Total gross shipping weight | 220 kg | |
| Total shipment volume | 2.9 CBM | |
| On-site assembly time | 90 minutes | |
| 20ft GP container loading quantity | 28 sets | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item |
Recommended spaces / users / usage modes
| Corporate executive reception areas | Formal traditional styling with wood trim and black upholstery, suitable for greeting business visitors in company headquarters and executive floor waiting zones | |
|---|---|---|
| Government and institution meeting waiting rooms | Conservative professional appearance, durable construction suitable for high-traffic public waiting areas in office buildings, public institutions and administrative facilities | |
| Private office lounge zones | Scaled to fit small lounge areas within executive private offices, providing casual seating for short meetings or visitor waiting | |
| Bank and financial service customer areas | Stain-resistant easy-to-clean surfaces and formal aesthetic suited for customer waiting spaces in bank branches, insurance offices and financial service centers | |
| Recommended pairing | Coordinate with matching dark wood office furniture, neutral tone carpet or hard flooring, minimal wall decor to maintain a professional uncluttered reception appearance | |
| Formal business guest rooms | Suitable for seating in hospitality suites or business guest rooms where a professional, durable and low-maintenance seating set is required | |
| Law firm and professional service waiting spaces | Formal understated design aligns with professional service brand presentation, durable for daily use by visiting clients |
EU Market Access Requirements* EN Standards
| EN 13759:2001 | Domestic and contract furniture – Seating – Test methods for determination of structural durability, applicable for cyclic load testing of sofa frames and joints for commercial use | |
|---|---|---|
| EN 1022:2005 | Domestic furniture – Seating – Determination of stability, applicable for verifying anti-tip stability of single chairs and three-seat sofa under normal use | |
| EN 15372:2008 | Furniture – Strength, durability and safety – Requirements for non-domestic tables, applicable for load and stability testing of coffee and side tables for office reception use | |
| EN 14465:2003 | Furniture – Upholstery fabrics – Specification for minimum performance requirements, applicable for abrasion, color fastness and tear strength of PU upholstery material |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2020 | Standard for Lounge Seating, applicable for commercial office reception seating, covering static load, durability, stability and dimensional performance criteria | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 | Standard for Desk Products, applicable for performance and safety requirements of the included wood coffee and side tables used in office environments |
Standards applicable to China-market projects
| GB/T 3324-2017 | Wooden furniture – General technical requirements, applicable for wooden trim, table components and frame finish quality, formaldehyde emission limits and surface durability | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials – Limit of harmful substances of wood based furniture, mandatory requirement for formaldehyde and heavy metal content for all wood-based components | |
| GB/T 16799-2008 | Polyurethane coated fabrics for furniture, applicable for performance requirements of the PU leather upholstery including abrasion resistance, color fastness and flexibility |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Wooden furniture – General technical requirements, applicable for wooden trim, table components and frame finish quality, formaldehyde emission limits and surface durability; 2. GB 18584-2001: Indoor decorating and refurbishing materials – Limit of harmful substances of wood based furniture, mandatory requirement for formaldehyde and heavy metal content for all wood-based components; 3. GB/T 16799-2008: Polyurethane coated fabrics for furniture, applicable for performance requirements of the PU leather upholstery including abrasion resistance, color fastness and flexibility; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
