Product supplierDark Brown Tufted Leather 3-Piece Executive Reception Sofa Set with Solid Wood Trim, 1.8 mm thick dark brown top-grain cowhide leather
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2840 × 990 × 930 mm | |
|---|---|---|
| Seat height from floor | 413 mm | |
| Usable seat depth per position | 572 mm | |
| Armrest width (padded surface) | 180 mm | |
| Armrest height from seat surface | 180 mm | |
| Backrest total height (seat to top) | 517 mm | |
| Total seating width (3-seat unit) | 1800 mm | |
| Minimum required access door width | 762 mm | |
| Plinth base height (floor to lower upholstery) | 80 mm | |
| Seat cushion thickness | 120 mm | |
| Backrest cushion thickness | 100 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total set net weight | 185 kg | |
|---|---|---|
| Per-seat static load capacity | 136 kg | |
| Leather upholstery abrasion resistance | 50000 cycles | |
| Seat cushion foam density | 45 kg/m³ | |
| Back cushion foam density | 35 kg/m³ | |
| Foam rebound rate | 60% | |
| Wood frame moisture content | 15% | |
| Frame static load warranty rating | 10 years | |
| Overall component warranty | 3 years | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Upholstery surface material | 1.8 mm thick dark brown top-grain cowhide leather | |
|---|---|---|
| Internal load-bearing frame | Kiln-dried eucalyptus solid wood with engineered wood reinforcement | |
| Exposed accent trim and base | Stained polished solid hardwood with clear lacquer finish | |
| Seat cushion core fill | High-density D45 polyurethane foam wrapped in 3A doll cotton | |
| Back cushion core fill | High-density D35 polyurethane foam over shaped support batting | |
| Seat support system | 3.2 mm high-carbon serpentine springs + 50 mm wide elastic webbing | |
| Surface treatment for leather | Stain-resistant, water-repellent, scratch-resistant top coating | |
| Structural adhesive | Low-VOC environmental grade wood and upholstery adhesive | |
| Seam stitching specification | Bonded polyester thread with 30 mm stitch pitch | |
| Decorative tufting hardware | Hidden metal tufting buttons securing quilted diamond pattern | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating configuration | 3-piece set including one 3-seat sofa and two matching single armchairs | |
|---|---|---|
| Seating position layout | 5 total adult seats across the full suite | |
| Recline functionality | Fixed upright non-reclining backrests | |
| Cushion attachment | Fixed permanently attached seat and back cushions | |
| Surface maintenance | Wipe-clean treated leather surface resists common liquid spills and stains | |
| Structural stability | Wide solid wood plinth base distributes weight evenly without rocking | |
| Assembly requirement | Fully assembled delivery with no end-user assembly required | |
| Armrest function | Wide padded solid wood-trimmed armrests support forearm rest and structural rigidity | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| 3-seat sofa shipping carton dimensions | 2100 x 890 x 980 mm | |
|---|---|---|
| Single armchair shipping carton dimensions | 950 x 890 x 880 mm | |
| Total shipping gross weight | 200 kg | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office reception areas | Formal traditional design supports high-end corporate visitor reception spaces | |
|---|---|---|
| Corporate VIP lounge spaces | Structured tufted leather and wood trim delivers premium formal aesthetic | |
| High-end residential living rooms | Classic traditional styling suits formal residential lounge layouts | |
| Hotel executive club spaces | Durable commercial construction withstands frequent public area use | |
| Government/agency meeting waiting areas | Conservative professional appearance matches formal institutional environments | |
| Boardroom ancillary seating | Matching 3-piece layout provides guest seating adjacent to meeting spaces |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 13759:2012 | Applicable for domestic and contract seating stability and strength testing | |
|---|---|---|
| EN 1021-1:2014 | Applicable for upholstered furniture cigarette ignition resistance testing |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2021 | Applicable for lounge and public seating performance and durability requirements | |
|---|---|---|
| ANSI/BIFMA e3-2019 | Applicable for furniture sustainability and material emission evaluation criteria |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable for general technical requirements of wooden furniture frames and strength | |
|---|---|---|
| GB/T 16799-2008 | Applicable for leather upholstery material quality and performance testing | |
| GB 18584-2001 | Applicable for indoor decoration material harmful substance limits for wooden furniture | |
| GB/T 39223.3-2020 | Applicable for health and safety requirements for upholstered furniture seating |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable for general technical requirements of wooden furniture frames and strength; 2. GB/T 16799-2008: Applicable for leather upholstery material quality and performance testing; 3. GB 18584-2001: Applicable for indoor decoration material harmful substance limits for wooden furniture; 4. GB/T 39223.3-2020: Applicable for health and safety requirements for upholstered furniture seating; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool