| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall single armchair dimensions | 1060 x 900 x 980 mm | |
|---|---|---|
| Overall 2-seat loveseat dimensions | 1560 x 900 x 820 mm | |
| Seat height above floor | 450 mm | |
| Seat usable depth | 600 mm | |
| Seat cushion thickness | 120 mm | |
| Backrest total height | 530 mm | |
| Armrest height above seat | 220 mm | |
| Matching side end table dimensions | 680 x 480 x 550 mm | |
| Central reception side table dimensions | 600 x 600 x 550 mm | |
| Frame solid wood trim thickness | 30 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Single armchair net weight | 70 kg | |
|---|---|---|
| Recommended per-seat static load capacity | 150 kg | |
| Seat foam density | 45 kg/m³ | |
| Foam compression set rate | 4 % | |
| Total seating capacity per full set | 10 seats | |
| Standard commercial product warranty | 3 years | |
| Fabric abrasion resistance grade | Grade 4 | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Structural frame | Kiln-dried solid hardwood, 12% moisture content, anti-insect anti-corrosion treatment | |
|---|---|---|
| Wood finish | Environmentally friendly water-based clear varnish, matte sheen | |
| Upholstery fabric | Beige linen-cashmere blended fabric, breathable woven texture | |
| Seat filling | High-density high-resilience polyurethane foam, anti-oxidation treated | |
| Backrest filling | Layered high-density foam with soft top layer, upright support design | |
| Armrest panel construction | Solid wood outer trim with fully upholstered inner arm pad | |
| Base support plinth | Solid wood perimeter base with hidden non-slip floor glides | |
| Side table top material | Matched solid wood veneer top with solid wood edge banding | |
| Internal joinery | Mortise and tenon reinforced corner joints with metal fastener backup | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm |
Adjustment / rotation / tilt / mobility / storage features
| Seating structure | Fully fixed stationary frame, no recline, swivel or tilt mechanisms | |
|---|---|---|
| Upright posture support | Structured 103° fixed back angle for formal seated conversation | |
| Floor protection | Hidden non-marking rubber glides on base to prevent hard floor scratching | |
| Side table integration | Tables positioned between adjacent seats for cup, document and amenity placement | |
| Customization option | Custom size, upholstery material and wood finish available for commercial projects | |
| Surface maintenance | Stain-resistant fabric treatment for commercial high-traffic use | |
| Seat configuration | Modular combination of single armchairs and 2-seat loveseats for symmetric layout | |
| Assembly requirement | Fully assembled delivery with on-site placement service available | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Executive VIP reception rooms | Formal symmetric layout designed for official government and corporate guest reception | |
|---|---|---|
| High-rise corporate boardrooms | Neutral beige and wood tone matches premium high-rise commercial interior finishes | |
| Government official meeting spaces | Conservative formal styling aligns with official diplomatic meeting space requirements | |
| Premium hotel executive lounges | Durable commercial construction supports high-frequency guest use | |
| Corporate board antechambers | Provides comfortable formal seating for pre-meeting guest waiting | |
| Recommended matching furniture | Paired with same wood-tone coffee tables and area carpets for complete set | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 1022:2018 | Domestic and contract furniture seating stability test standard | |
|---|---|---|
| EN 12520:2015 | Furniture strength, durability and safety for domestic and contract seating | |
| EN 13759:2008 | Upholstered furniture resistance to ignition by smouldering cigarette |
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to solid wood frame structure | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material formaldehyde emission limit for wooden furniture | |
| GB/T 1952.1-2012 | General technical requirements for upholstered sofas for contract use | |
| GB/T 17592-2011 | Textile limit for banned azo colorants in upholstery fabric |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood frame structure; 2. GB 18584-2001: Indoor decoration material formaldehyde emission limit for wooden furniture; 3. GB/T 1952.1-2012: General technical requirements for upholstered sofas for contract use; 4. GB/T 17592-2011: Textile limit for banned azo colorants in upholstery fabric; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
