3-Piece Executive Office Reception Sofa Set (1+1+3 Configuration, Dark Brown Leather with Solid Wood Accents) (model OFS-113-DB-WD) is listed under Genuine Leather Sofa. Dimensions: 2200 × 860 × 900 mm. Materials: Kiln-dried solid hardwood (pine/eucalyptus) with plywood reinforcement, 12% moisture content, anti-insect treated. Load capacity: 500 kg. Product Features: Blocky,formal,design,Upholstered,seating,1+1+3,configuration,Solid,wood,trim,Dark,brown,leather,finish,Commercial,grade. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | LINGKEN | Model | OFS-113-DB-WD |
| Overall dimensions (W × D × H) | 2200 × 860 × 900 mm | Overall three-seat sofa dimensions | 2200 x 860 x 900 mm |
| Overall single armchair dimensions | 1200 x 860 x 900 mm | Seat height from floor | 450 mm |
| Seat depth per seating position | 550 mm | Seat cushion thickness | 150 mm |
| Backrest total height above seat | 450 mm | Armrest width | 180 mm |
| Armrest height from floor | 620 mm | Wooden foot height | 100 mm |
| Seating width per single position (three-seat unit) | 620 mm | Wood trim panel thickness on base and arms | 30 mm |
| Back Cushion Thickness | 160 mm | Leg Height / Floor Clearance | 160 mm |
| Total static load capacity (three-seat unit) | 500 kg | Seat foam density | 45 kg/m³ |
| Seat foam rebound rate | 60% | Seat foam compression set | 5% |
| Back foam density | 35 kg/m³ | Armrest foam density | 40 kg/m³ |
| Leather colorfastness grade | 4 | Leather abrasion resistance cycles | 50000 cycles |
| Upholstery seam pitch | 4 stitches per cm | Total set net weight | 250 kg |
| Internal structural frame | Kiln-dried solid hardwood (pine/eucalyptus) with plywood reinforcement, 12% moisture content, anti-insect treated | Seat support system | 3.0mm gauge sinuous springs at 80mm spacing, paired with high-tension elastic webbing |
| Seat cushion padding | 45kg/m³ high-resilience polyurethane foam, topped with 180g silk floss layer for softness | Backrest padding | 35kg/m³ medium-density polyurethane foam, contoured for lumbar support |
| Armrest padding | 40kg/m³ high-density polyurethane foam wrapped in leather | Primary upholstery | Dark brown top-grain split corrected leather, water and stain resistant finish |
| Decorative trim and base panels | Polished solid wood veneer over engineered wood core, clear lacquer finish | Feet and support blocks | Solid hardwood block feet, fitted with anti-slip rubber floor pads |
| Joinery hardware | Mortise-and-tenon joints reinforced with corrosion-resistant steel screws and corner brackets | Surface stitching | High-tensile bonded polyester thread, double-stitched along all leather panel seams |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
| Seating configuration | Symmetric 1 three-seat sofa + 2 single armchairs layout for formal reception arrangements | Assembly requirement | Minimal on-site attachment of wooden foot blocks with included hardware, no full upholstery assembly needed |
| Seating support | Fixed non-reclining, non-tilting seat and backrests designed for upright formal visitor seating | Floor protection | Anti-slip rubber pads on all feet prevent floor scratching and unwanted sliding |
| Surface maintenance | Leather surface supports wipe-clean care with standard leather cleaning products, resistant to common office spills | Arrangement flexibility | Individual units can be arranged in U-shape, linear, or separated configurations to fit different reception room sizes |
| Weight distribution | Low-profile wide base distributes user weight evenly to prevent indentation on soft office flooring | Durability design | Reinforced frame and high-density foam resist sagging and deformation under daily commercial use over 8+ years |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods | Reference Package Count | 1 set / 2 cartons |
| Reference Assembly Time | 40 minutes per set | Reference Module Carton Dimensions | 2200× 1050× 850 mm |
| Reference Packaging Volume | 1.8 m³/item | Reference Packaged Gross Weight | 110 kg/item |
| Executive office reception areas | Formal blocky design with wood trim matches high-level executive meeting and visitor spaces | Corporate lobby waiting zones | Durable commercial construction supports high-traffic daily visitor use |
| Government and institutional meeting rooms | Conservative dark brown leather and wood aesthetic fits formal official environments | VIP lounge areas in hotels or business centers | Comfortable padded seating provides extended wait comfort for guests |
| Private boardroom auxiliary seating | Compact symmetric layout fits alongside conference tables for additional meeting seating | Recommended matching furniture | Solid wood executive reception desk, matching dark brown leather office chairs, solid wood coffee table |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2200 × 860 × 900 mm | |
|---|---|---|
| Overall three-seat sofa dimensions | 2200 x 860 x 900 mm | |
| Overall single armchair dimensions | 1200 x 860 x 900 mm | |
| Seat height from floor | 450 mm | |
| Seat depth per seating position | 550 mm | |
| Seat cushion thickness | 150 mm | |
| Backrest total height above seat | 450 mm | |
| Armrest width | 180 mm | |
| Armrest height from floor | 620 mm | |
| Wooden foot height | 100 mm | |
| Seating width per single position (three-seat unit) | 620 mm | |
| Wood trim panel thickness on base and arms | 30 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total static load capacity (three-seat unit) | 500 kg | |
|---|---|---|
| Seat foam density | 45 kg/m³ | |
| Seat foam rebound rate | 60% | |
| Seat foam compression set | 5% | |
| Back foam density | 35 kg/m³ | |
| Armrest foam density | 40 kg/m³ | |
| Leather colorfastness grade | 4 | |
| Leather abrasion resistance cycles | 50000 cycles | |
| Upholstery seam pitch | 4 stitches per cm | |
| Total set net weight | 250 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Internal structural frame | Kiln-dried solid hardwood (pine/eucalyptus) with plywood reinforcement, 12% moisture content, anti-insect treated | |
|---|---|---|
| Seat support system | 3.0mm gauge sinuous springs at 80mm spacing, paired with high-tension elastic webbing | |
| Seat cushion padding | 45kg/m³ high-resilience polyurethane foam, topped with 180g silk floss layer for softness | |
| Backrest padding | 35kg/m³ medium-density polyurethane foam, contoured for lumbar support | |
| Armrest padding | 40kg/m³ high-density polyurethane foam wrapped in leather | |
| Primary upholstery | Dark brown top-grain split corrected leather, water and stain resistant finish | |
| Decorative trim and base panels | Polished solid wood veneer over engineered wood core, clear lacquer finish | |
| Feet and support blocks | Solid hardwood block feet, fitted with anti-slip rubber floor pads | |
| Joinery hardware | Mortise-and-tenon joints reinforced with corrosion-resistant steel screws and corner brackets | |
| Surface stitching | High-tensile bonded polyester thread, double-stitched along all leather panel seams | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating configuration | Symmetric 1 three-seat sofa + 2 single armchairs layout for formal reception arrangements | |
|---|---|---|
| Assembly requirement | Minimal on-site attachment of wooden foot blocks with included hardware, no full upholstery assembly needed | |
| Seating support | Fixed non-reclining, non-tilting seat and backrests designed for upright formal visitor seating | |
| Floor protection | Anti-slip rubber pads on all feet prevent floor scratching and unwanted sliding | |
| Surface maintenance | Leather surface supports wipe-clean care with standard leather cleaning products, resistant to common office spills | |
| Arrangement flexibility | Individual units can be arranged in U-shape, linear, or separated configurations to fit different reception room sizes | |
| Weight distribution | Low-profile wide base distributes user weight evenly to prevent indentation on soft office flooring | |
| Durability design | Reinforced frame and high-density foam resist sagging and deformation under daily commercial use over 8+ years | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office reception areas | Formal blocky design with wood trim matches high-level executive meeting and visitor spaces | |
|---|---|---|
| Corporate lobby waiting zones | Durable commercial construction supports high-traffic daily visitor use | |
| Government and institutional meeting rooms | Conservative dark brown leather and wood aesthetic fits formal official environments | |
| VIP lounge areas in hotels or business centers | Comfortable padded seating provides extended wait comfort for guests | |
| Private boardroom auxiliary seating | Compact symmetric layout fits alongside conference tables for additional meeting seating | |
| Recommended matching furniture | Solid wood executive reception desk, matching dark brown leather office chairs, solid wood coffee table |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Applicable European standard for furniture strength, durability and safety for non-domestic seating | |
|---|---|---|
| EN 1021-1:2014 | Applicable standard for upholstered furniture ignition resistance from smouldering cigarettes | |
| EN 1021-2:2014 | Applicable standard for upholstered furniture ignition resistance from match flames for public spaces |
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
| GB/T 3324-2024 | Applicable standard for wooden furniture general technical requirements, covering wood frame material and finish performance | |
|---|---|---|
| GB 18580-2017 | Applicable standard for formaldehyde emission limits, requiring E0 grade (≤0.05mg/m³) for wood-based panel components | |
| GB 18401-2010 Class B | Applicable standard for textile safety, relevant for any underlying fabric layers in upholstery construction | |
| GB/T 16799-2008 | Applicable standard for furniture leather, specifying physical performance requirements for leather upholstery |
This product must meet the following technical requirements: 1. GB/T 3324-2024: Applicable standard for wooden furniture general technical requirements, covering wood frame material and finish performance; 2. GB 18580-2017: Applicable standard for formaldehyde emission limits, requiring E0 grade (≤0.05mg/m³) for wood-based panel components; 3. GB 18401-2010 Class B: Applicable standard for textile safety, relevant for any underlying fabric layers in upholstery construction; 4. GB/T 16799-2008: Applicable standard for furniture leather, specifying physical performance requirements for leather upholstery; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp